Mark Turner
Basic fading in and out of leds with light sensor.
Diff: SLCD/FRDM-s401.h
- Revision:
- 0:cf7af2656659
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/SLCD/FRDM-s401.h Mon Sep 19 03:24:58 2016 +0000 @@ -0,0 +1,97 @@ +#pragma once +/*^^^^^^^^^^^^^^^^ LCD HARDWARE CONECTION ^^^^^^^^^^^^^^^^^^^^^^^^*/ +#define _LCDFRONTPLANES (8) // # of frontPlanes +#define _LCDBACKPLANES (4) // # of backplanes + +/* + LCD logical organization definition + This section indicates how the LCD is distributed how many characteres of (7-seg, 14,seg, 16 seg, or colums in case of Dot Matrix) does it contain + First character is forced only one can be written + +*/ +// HARDWARE_CONFIG Changing LCD pins Allows to verify all LCD pins easily +// if HARDWARE_CONFIG == 0 FRDM-KL46 RevB +// if HARDWARE_CONFIG == 1 FRDM-KL46 RevA +#ifdef FRDM_REVA +#define HARDWARE_CONFIG 1 +#else +#define HARDWARE_CONFIG 0 +#endif + +#define _CHARNUM (4) //number of chars that can be written +#define _CHAR_SIZE (2) // Used only when Dot Matrix is used +#define _LCDTYPE (2) //indicate how many LCD_WF are required to write a single Character + +/* + Following definitions indicate how characters are associated to waveform +*/ +/* Hardware configuration */ +#if HARDWARE_CONFIG == 0 + +// LCD PIN1 to LCDWF0 Rev B +#define CHAR1a 37 // LCD Pin 5 +#define CHAR1b 17 // LCD Pin 6 +#define CHAR2a 7 // LCD Pin 7 +#define CHAR2b 8 // LCD Pin 8 +#define CHAR3a 53 // LCD Pin 9 +#define CHAR3b 38 // LCD Pin 10 +#define CHAR4a 10 // LCD Pin 11 +#define CHAR4b 11 // LCD Pin 12 +#define CHARCOM0 40 // LCD Pin 1 +#define CHARCOM1 52 // LCD Pin 2 +#define CHARCOM2 19 // LCD Pin 3 +#define CHARCOM3 18 // LCD Pin 4 + +// LCD PIN1 to LCDWF2 for FRDM-KL46Z +#elif HARDWARE_CONFIG == 1 +#define CHAR1a 37 // LCD Pin 5 +#define CHAR1b 17 // LCD Pin 6 +#define CHAR2a 7 // LCD Pin 7 +#define CHAR2b 8 // LCD Pin 8 +#define CHAR3a 12 // LCD Pin 9 +#define CHAR3b 26 // LCD Pin 10 +#define CHAR4a 10 // LCD Pin 11 +#define CHAR4b 11 // LCD Pin 12 +#define CHARCOM0 51 // LCD Pin 1 +#define CHARCOM1 52 // LCD Pin 2 +#define CHARCOM2 19 // LCD Pin 3 +#define CHARCOM3 16 // LCD Pin 4 + +#endif + + +/*Ascii Codification table information */ +#define ASCCI_TABLE_START '0' // indicates which is the first Ascii character in the table +#define ASCCI_TABLE_END 'Z' // indicates which is the first Ascii character in the table +#define BLANK_CHARACTER '>' // Indicate which ASCII character is a blank character (depends on ASCII table) + +#define _ALLON 0xFF // Used for ALL_on function + +#define SEGDP 0x01 +#define SEGC 0x02 +#define SEGB 0x04 +#define SEGA 0x08 + +#define SEGD 0x01 +#define SEGE 0x02 +#define SEGG 0x04 +#define SEGF 0x08 + + +/* Fault detect initial limits */ + +/* Fault detect initial parameters and limits */ +#define FAULTD_FP_FDPRS FDPRS_32 +#define FAULTD_FP_FDSWW FDSWW_128 +#define FAULTD_BP_FDPRS FDPRS_64 +#define FAULTD_BP_FDSWW FDSWW_128 + +#define FAULTD_FP_HI 127 +#define FAULTD_FP_LO 110 +#define FAULTD_BP_HI 127 +#define FAULTD_BP_LO 110 +#define FAULTD_TIME 6 + +extern const uint8_t WF_ORDERING_TABLE[]; // Logical Front plane N to LCD_WFx + +