mirza sarwar / Mbed 2 deprecated BLE_HeartRate_30102

hr with 30102

Dependencies:   BLE_API mbed X_NUCLEO_IDB0XA1

Fork of BLE_HeartRate by Bluetooth Low Energy

Files at this revision

API Documentation at this revision

Revision 65:cb76569f74f6, committed 2015-06-20

Comitter:
rgrover1
Date:
Sat Jun 20 00:03:36 2015 +0000
Parent:
64:749d180e6a3d
Child:
66:c09ddf226b9c
Commit message:
make use of the gap() accessor for ble

Changed in this revision

BLE_API.lib Show annotated file Show diff for this revision Revisions of this file
main.cpp Show annotated file Show diff for this revision Revisions of this file
mbed.bld Show annotated file Show diff for this revision Revisions of this file
nRF51822.lib Show annotated file Show diff for this revision Revisions of this file 
--- a/BLE_API.lib	Mon Jun 08 10:02:17 2015 +0000
+++ b/BLE_API.lib	Sat Jun 20 00:03:36 2015 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/teams/Bluetooth-Low-Energy/code/BLE_API/#c4436674db7b
+http://mbed.org/teams/Bluetooth-Low-Energy/code/BLE_API/#b04b5db36865

--- a/main.cpp	Mon Jun 08 10:02:17 2015 +0000
+++ b/main.cpp	Sat Jun 20 00:03:36 2015 +0000
@@ -15,7 +15,7 @@
  */
 
 #include "mbed.h"
-#include "BLEDevice.h"
+#include "BLE.h"
 #include "HeartRateService.h"
 #include "DeviceInformationService.h"
 
@@ -54,7 +54,7 @@
     ticker.attach(periodicCallback, 1); // blink LED every second
 
     ble.init();
-    ble.onDisconnection(disconnectionCallback);
+    ble.gap().onDisconnection(disconnectionCallback);
 
     /* Setup primary service. */
     uint8_t hrmCounter = 100; // init HRM to 100bps
@@ -64,13 +64,13 @@
     DeviceInformationService deviceInfo(ble, "ARM", "Model1", "SN1", "hw-rev1", "fw-rev1", "soft-rev1");
 
     /* Setup advertising. */
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::GENERIC_HEART_RATE_SENSOR);
-    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
-    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
-    ble.setAdvertisingInterval(1000);
-    ble.startAdvertising();
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::GENERIC_HEART_RATE_SENSOR);
+    ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
+    ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
+    ble.gap().setAdvertisingInterval(1000);
+    ble.gap().startAdvertising();
 
     // infinite loop
     while (1) {

--- a/mbed.bld	Mon Jun 08 10:02:17 2015 +0000
+++ b/mbed.bld	Sat Jun 20 00:03:36 2015 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/cbbeb26dbd92
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/7cff1c4259d7
\ No newline at end of file

--- a/nRF51822.lib	Mon Jun 08 10:02:17 2015 +0000
+++ b/nRF51822.lib	Sat Jun 20 00:03:36 2015 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/teams/Nordic-Semiconductor/code/nRF51822/#d0fc349b9a1b
+http://mbed.org/teams/Nordic-Semiconductor/code/nRF51822/#7c68c8d67e1f