Matthew Shoemaker
USB Host Lite downloaded from NXP web site. Untested! Compiled, dropped on MBED, booted up, and get the console message that it is initializing the stack. I however do not have the ability to connect a USB Memory device to test it.
Diff: Main/usbhost_main.c
- Revision:
- 0:0826fcc5d020
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Main/usbhost_main.c Wed Jan 13 01:29:30 2010 +0000
@@ -0,0 +1,189 @@
+/*
+**************************************************************************************************************
+* NXP USB Host Stack
+*
+* (c) Copyright 2008, NXP SemiConductors
+* (c) Copyright 2008, OnChip Technologies LLC
+* All Rights Reserved
+*
+* www.nxp.com
+* www.onchiptech.com
+*
+* File : usbhost_main.c
+* Programmer(s) : Ravikanth.P
+* Version :
+*
+**************************************************************************************************************
+*/
+
+/*
+**************************************************************************************************************
+* INCLUDE HEADER FILES
+**************************************************************************************************************
+*/
+
+#include "usbhost_main.h"
+
+/*
+**************************************************************************************************************
+* MAIN FUNCTION
+*
+* Description: This function is the main function where the execution begins
+*
+* Arguments : None
+*
+* Returns :
+*
+**************************************************************************************************************
+*/
+
+int main()
+{
+ USB_INT32S rc;
+ USB_INT32U numBlks, blkSize;
+ USB_INT08U inquiryResult[INQUIRY_LENGTH];
+
+ SystemInit(); /* initialize clocks */
+
+ UART_Init(115200); /* Initialize the serial port to view the log messages */
+ Host_Init(); /* Initialize the lpc17xx host controller */
+ rc = Host_EnumDev(); /* Enumerate the device connected */
+ if (rc == OK) {
+ /* Initialize the mass storage and scsi interfaces */
+ rc = MS_Init( &blkSize, &numBlks, inquiryResult );
+ if (rc == OK) {
+ rc = FAT_Init(); /* Initialize the FAT16 file system */
+ if (rc == OK) {
+ Main_Copy(); /* Call the application */
+ } else {
+ return (0);
+ }
+ } else {
+ return (0);
+ }
+ } else {
+ return (0);
+ }
+ while(1);
+}
+
+/*
+**************************************************************************************************************
+* READ DATA FROM DISK
+*
+* Description: This function is used by the user to read data from the disk
+*
+* Arguments : None
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void Main_Read (void)
+{
+ USB_INT32S fdr;
+ USB_INT32U bytes_read;
+
+
+ fdr = FILE_Open((char *)FILENAME_R, RDONLY);
+ if (fdr > 0) {
+ PRINT_Log("Reading from %s...\n", FILENAME_R);
+ do {
+ bytes_read = FILE_Read(fdr, UserBuffer, MAX_BUFFER_SIZE);
+ } while (bytes_read);
+
+ FILE_Close(fdr);
+ PRINT_Log("Read Complete\n");
+ } else {
+ PRINT_Log("Could not open file %s\n", FILENAME_R);
+ return;
+ }
+}
+
+/*
+**************************************************************************************************************
+* WRITE DATA TO DISK
+*
+* Description: This function is used by the user to write data to disk
+*
+* Arguments : None
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void Main_Write (void)
+{
+ USB_INT32S fdw;
+ USB_INT32S fdr;
+ USB_INT32U tot_bytes_written;
+ USB_INT32U bytes_written;
+
+
+ fdr = FILE_Open((char *)FILENAME_R, RDONLY);
+ if (fdr > 0) {
+ FILE_Read(fdr, UserBuffer, MAX_BUFFER_SIZE);
+ fdw = FILE_Open((char *)FILENAME_W, RDWR);
+ if (fdw > 0) {
+ tot_bytes_written = 0;
+ PRINT_Log("Writing to %s...\n", FILENAME_W);
+ do {
+ bytes_written = FILE_Write(fdw, UserBuffer, MAX_BUFFER_SIZE);
+ tot_bytes_written += bytes_written;
+ } while (tot_bytes_written < WRITE_SIZE);
+ FILE_Close(fdw);
+ PRINT_Log("Write completed\n");
+ } else {
+ PRINT_Log("Could not open file %s\n", FILENAME_W);
+ return;
+ }
+ FILE_Close(fdr);
+ } else {
+ PRINT_Log("Could not open file %s\n", FILENAME_R);
+ return;
+ }
+}
+
+/*
+**************************************************************************************************************
+* COPYING A FILE
+*
+* Description: This function is used by the user to copy a file
+*
+* Arguments : None
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void Main_Copy (void)
+{
+ USB_INT32S fdr;
+ USB_INT32S fdw;
+ USB_INT32U bytes_read;
+
+
+ fdr = FILE_Open((char *)FILENAME_R, RDONLY);
+ if (fdr > 0) {
+ fdw = FILE_Open((char *)FILENAME_W, RDWR);
+ if (fdw > 0) {
+ PRINT_Log("Copying from %s to %s...\n", FILENAME_R, FILENAME_W);
+ do {
+ bytes_read = FILE_Read(fdr, UserBuffer, MAX_BUFFER_SIZE);
+ FILE_Write(fdw, UserBuffer, bytes_read);
+ } while (bytes_read);
+ FILE_Close(fdw);
+ } else {
+ PRINT_Log("Could not open file %s\n", FILENAME_W);
+ return;
+ }
+ FILE_Close(fdr);
+ PRINT_Log("Copy completed\n");
+ } else {
+ PRINT_Log("Could not open file %s\n", FILENAME_R);
+ return;
+ }
+}