![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Writing data to and from a USB stick
Diff: MSCFileSystem.cpp
- Revision:
- 0:5934350323b2
diff -r 000000000000 -r 5934350323b2 MSCFileSystem.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/MSCFileSystem.cpp Sun Nov 06 15:45:12 2011 +0000 @@ -0,0 +1,113 @@ +/* USB Mass Storage device file system + * Copyrigh (c) 2010, Igor Skochinsky + * based on SDFileStorage + * Copyright (c) 2008-2009, sford + */ + +/* Introduction + * ------------ + * TODO: write one + * we're basically using NXP's USBHotLite sample code, just plugging in our own FAT library + */ + +#include "MSCFileSystem.h" +#include "usbhost_inc.h" + +MSCFileSystem::MSCFileSystem(const char* name) : + FATFileSystem(name) +{ +} + +void print_inquiry(USB_INT08U *inqReply) +{ + // see USB Mass Storage Class – UFI Command Specification, + // 4.2 INQUIRY Command + printf("Inquiry reply:\n"); + uint8_t tmp = inqReply[0]&0x1F; + printf("Peripheral device type: %02Xh\n", tmp); + if ( tmp == 0 ) + printf("\t- Direct access (floppy)\n"); + else if ( tmp == 0x1F ) + printf("\t- none (no FDD connected)\n"); + else + printf("\t- unknown type\n"); + tmp = inqReply[1] >> 7; + printf("Removable Media Bit: %d\n", tmp); + tmp = inqReply[2] & 3; + printf("ANSI Version: %02Xh\n", tmp); + if ( tmp != 0 ) + printf("\t- warning! must be 0\n"); + tmp = (inqReply[2]>>3) & 3; + printf("ECMA Version: %02Xh\n", tmp); + if ( tmp != 0 ) + printf("\t- warning! should be 0\n"); + tmp = inqReply[2]>>6; + printf("ISO Version: %02Xh\n", tmp); + if ( tmp != 0 ) + printf("\t- warning! should be 0\n"); + tmp = inqReply[3] & 0xF; + printf("Response Data Format: %02Xh\n", tmp); + if ( tmp != 1 ) + printf("\t- warning! should be 1\n"); + tmp = inqReply[4]; + printf("Additional length: %02Xh\n", tmp); + if ( tmp != 0x1F ) + printf("\t- warning! should be 1Fh\n"); + printf("Vendor Information: '%.8s'\n", &inqReply[8]); + printf("Product Identification: '%.16s'\n", &inqReply[16]); + printf("Product Revision: '%.4s'\n", &inqReply[32]); +} + +int MSCFileSystem::initialise_msc() +{ + USB_INT32S rc; + USB_INT08U inquiryResult[INQUIRY_LENGTH]; + + //print_clock(); + Host_Init(); /* Initialize the host controller */ + rc = Host_EnumDev(); /* Enumerate the device connected */ + if (rc != OK) + { + fprintf(stderr, "Could not enumerate device: %d\n", rc); + return rc; + } + + + /* Initialize the mass storage and scsi interfaces */ + rc = MS_Init( &_blkSize, &_numBlks, inquiryResult ); + if (rc != OK) + { + fprintf(stderr, "Could not initialize mass storage interface: %d\n", rc); + return rc; + } + printf("Successfully initialized mass storage interface; %d blocks of size %d\n", _numBlks, _blkSize); + print_inquiry(inquiryResult); + // FATFileSystem supports only 512-byte blocks + return _blkSize == 512 ? OK : 1; +} + +int MSCFileSystem::disk_initialize() +{ + if ( initialise_msc() != OK ) + return 1; + + return 0; +} + +int MSCFileSystem::disk_write(const char *buffer, int block_number) +{ + if ( OK == MS_BulkSend(block_number, 1, (USB_INT08U *)buffer) ) + return 0; + return 1; +} + +int MSCFileSystem::disk_read(char *buffer, int block_number) +{ + if ( OK == MS_BulkRecv(block_number, 1, (USB_INT08U *)buffer) ) + return 0; + return 1; +} + +int MSCFileSystem::disk_status() { return 0; } +int MSCFileSystem::disk_sync() { return 0; } +int MSCFileSystem::disk_sectors() { return _numBlks; }