Diff: WattBob_TextLCD.h

Revision:

0:3d3331775af2

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/WattBob_TextLCD.h	Wed May 08 03:37:43 2019 +0000
@@ -0,0 +1,158 @@
+/* draft mbed TextLCD 
+ * (c) 2007/8, sford
+ */
+ 
+#ifndef WATTBOB_TEXTLCD_H
+#define WATTBOB_TEXTLCD_H
+
+#include "mbed.h"
+#include "Stream.h"
+#include "MCP23017.h"
+
+#define     RS_BIT      7
+#define     RW_BIT      6
+#define     E_BIT       5
+#define     BL_BIT      4   
+
+//
+// Registers and bit definitions for 2*16 character display chip
+//
+#define     CMD_NULL                0x00
+
+#define     CMD_CLEAR_DISPLAY       0x01
+
+#define     CMD_RETURN_HOME         0x02
+
+#define     CMD_ENTRY_MODE          0x04
+#define       CURSOR_STEP_LEFT      0x00
+#define       CURSOR_STEP_RIGHT     0x02
+#define       DISPLAY_SHIFT_OFF     0x00
+#define       DISPLAY_SHIFT_ON      0x01
+       
+#define     CMD_DISPLAY_CONTROL     0x08
+#define       DISPLAY_OFF           0x00
+#define       DISPLAY_ON            0x04
+#define       CURSOR_OFF            0x00
+#define       CURSOR_ON             0x02
+#define       CURSOR_CHAR_BLINK_OFF 0x00
+#define       CURSOR_CHAR_BLINK_ON  0x01
+
+#define     CMD_CURSOR_SHIFT        0x10
+#define       SHIFT_CURSOR_LEFT     0x00
+#define       SHIFT_CURSOR_RIGHT    0x04
+#define       SHIFT_DISPLAY_LEFT    0x08
+#define       SHIFT_DISPLAY_RIGHT   0x0C
+
+#define     CMD_MODE_POWER          0x13
+#define       CHARACTER_MODE        0x00
+#define       GRAPHICS_MODE         0x08
+#define       INTERNAL_POWER_OFF    0x00
+#define       INTERNAL_POWER_ON     0x04
+
+#define     CMD_FUNCTION_SET        0x20
+#define       ENGL_JAPAN_FONT_SET   0x00
+#define       EUROPE_FONT_SET       0x01
+#define       ENGL_RUSSIAN_FONT_SET 0x20
+#define       FONT_5x8              0x00
+#define       FONT_5x10             0x04
+#define       ONE_LINE_DISPLAY      0x00
+#define       TWO_LINE_DISPLAY      0x08
+#define       INTERFACE_4_BIT       0x00
+#define       INTERFACE_8_BIT       0x10
+
+#define     CMD_SET_CGRAM_ADDRESS   0x40
+
+#define     CMD_SET_DDRAM_ADDRESS   0x80
+//
+// nibble commands
+//
+#define     CMD4_SET_4_BIT_INTERFACE 0x2
+#define     CMD4_SET_8_BIT_INTERFACE 0x3
+//
+// Misc 2*16 character display constants
+//
+#define     DISPLAY_INIT_DELAY_SECS    0.5f       // 500mS
+#define     DISPLAY_CLEAR_DELAY        0.01f      // 10 mS (spec is 6.2mS)
+
+/** Class to access 16*2 LCD display connected to an MCP23017 I/O extender chip
+ *
+ * Derived from the "stream" class to be able to use methods such as "printf"
+ *
+ * Example :
+ * @code
+ * .....
+ * #include "MCP23017.h"
+ * #include "WattBob_TextLCD.h"
+ * .....
+ * MCP23017            *par_port;
+ * WattBob_TextLCD     *lcd;
+ *      .....
+ * int main()
+ *      par_port = new MCP23017(p9, p10, 0x40);
+ *      par_port->config(0x0F00, 0x0F00, 0x0F00);           // configure MCP23017 chip on WattBob       
+ *      lcd = new WattBob_TextLCD(par_port);
+ *
+ *      par_port->write_bit(1,BL_BIT);   // turn LCD backlight ON
+ *      lcd->cls(); lcd->locate(0,0);
+ *      lcd->printf("%s", message);
+ *      lcd->locate(1,0);lcd->printf("press 1 to cont"); 
+ * @endcode
+ */ 
+class WattBob_TextLCD : public Stream {
+
+public:
+    /** Create TextLCD object connected to a MCP23017 device
+     *
+     * @param   port    pointer to MCP23017 object
+     */ 
+    WattBob_TextLCD(MCP23017 *port);
+    
+    /** Set cursor to a known point
+     *
+     * Virtual function for stream class
+     *
+     * @param   row   integer row number (0 or 1)
+     * @param   col   integer column number (0 or 15)     
+     */            
+    virtual void locate(int row, int column);
+    
+    /** clear display
+     *
+     * Virtual function for stream class
+     */     
+    virtual void cls();
+
+    /** reset the display
+     *
+     * Virtual function for stream class
+     */             
+    virtual void reset();
+        
+protected:
+
+    virtual int _putc(int c);        
+    virtual int _getc();
+    virtual void newline();      
+    
+    void clock();
+    void writeData(int data);
+    void writeCommand(int command);
+    void writeByte(int value);
+    void writeNibble(int value);
+    
+    void _rs (int data);
+    void _rw (int data);    
+    void _e (int data);
+    void _d (int data);
+           
+    int _rows;
+    int _columns;
+    int _row;
+    int _column;   
+    
+private:
+    MCP23017    *par_port; 
+};
+
+#endif
+