same
Fork of BNO055_fusion by
BNO055.cpp
- Committer:
- kenjiArai
- Date:
- 2015-04-07
- Revision:
- 1:cb7e19c0a702
- Parent:
- 0:86a17116e8be
- Child:
- 2:0f225b686cd5
File content as of revision 1:cb7e19c0a702:
/* * mbed library program * BNO055 Intelligent 9-axis absolute orientation sensor * by Bosch Sensortec * * Copyright (c) 2015 Kenji Arai / JH1PJL * http://www.page.sannet.ne.jp/kenjia/index.html * http://mbed.org/users/kenjiArai/ * Created: March 30th, 2015 * Revised: April 7th, 2015 * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #include "mbed.h" #include "BNO055.h" BNO055::BNO055 (PinName p_sda, PinName p_scl, PinName p_reset, uint8_t addr, uint8_t mode): _i2c(p_sda, p_scl), _res(p_reset) { chip_addr = addr; chip_mode = mode; initialize (); } BNO055::BNO055 (PinName p_sda, PinName p_scl, PinName p_reset) : _i2c(p_sda, p_scl), _res(p_reset) { chip_addr = BNO055_G_CHIP_ADDR; chip_mode = MODE_NDOF; initialize (); } BNO055::BNO055 (I2C& p_i2c, PinName p_reset, uint8_t addr, uint8_t mode) : _i2c(p_i2c), _res(p_reset) { chip_addr = addr; chip_mode = mode; initialize (); } BNO055::BNO055 (I2C& p_i2c, PinName p_reset) : _i2c(p_i2c), _res(p_reset) { chip_addr = BNO055_G_CHIP_ADDR; chip_mode = MODE_NDOF; initialize (); } /////////////// Read data & normalize ///////////////////// void BNO055::get_Euler_Angles(BNO055_EULER_TypeDef *el) { uint8_t deg_or_rad; int16_t h,p,r; select_page(0); dt[0] = BNO055_UNIT_SEL; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); if (dt[0] & 0x04) { deg_or_rad = 1; // Radian } else { deg_or_rad = 0; // Degree } dt[0] = BNO055_EULER_H_LSB; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 6, false); h = dt[1] << 8 | dt[0]; p = dt[3] << 8 | dt[2]; r = dt[5] << 8 | dt[4]; if (deg_or_rad) { el->h = (double)(h / 900); el->p = (double)(p / 900); el->r = (double)(r / 900); } else { el->h = (double)(h / 16); el->p = (double)(p / 16); el->r = (double)(r / 16); } } void BNO055::get_quaternion(BNO055_QUATERNION_TypeDef *qua) { select_page(0); dt[0] = BNO055_QUATERNION_W_LSB; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 8, false); qua->w = dt[1] << 8 | dt[0]; qua->x = dt[3] << 8 | dt[2]; qua->y = dt[5] << 8 | dt[4]; qua->z = dt[7] << 8 | dt[6]; } void BNO055::get_linear_accel(BNO055_LIN_ACC_TypeDef *la) { uint8_t ms2_or_mg; int16_t x,y,z; select_page(0); dt[0] = BNO055_UNIT_SEL; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); if (dt[0] & 0x01) { ms2_or_mg = 1; // mg } else { ms2_or_mg = 0; // m/s*s } dt[0] = BNO055_LINEAR_ACC_X_LSB; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 6, false); x = dt[1] << 8 | dt[0]; y = dt[3] << 8 | dt[2]; z = dt[5] << 8 | dt[4]; if (ms2_or_mg) { la->x = (double)x; la->y = (double)y; la->z = (double)z; } else { la->x = (double)(x / 100); la->y = (double)(y / 100); la->z = (double)(z / 100); } } void BNO055::get_gravity(BNO055_GRAVITY_TypeDef *gr) { uint8_t ms2_or_mg; int16_t x,y,z; select_page(0); dt[0] = BNO055_UNIT_SEL; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); if (dt[0] & 0x01) { ms2_or_mg = 1; // mg } else { ms2_or_mg = 0; // m/s*s } dt[0] = BNO055_GRAVITY_X_LSB; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 6, false); x = dt[1] << 8 | dt[0]; y = dt[3] << 8 | dt[2]; z = dt[5] << 8 | dt[4]; if (ms2_or_mg) { gr->x = (double)x; gr->y = (double)y; gr->z = (double)z; } else { gr->x = (double)(x / 100); gr->y = (double)(y / 100); gr->z = (double)(z / 100); } } void BNO055::get_chip_temperature(BNO055_TEMPERATURE_TypeDef *tmp) { uint8_t c_or_f; select_page(0); dt[0] = BNO055_UNIT_SEL; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); if (dt[0] & 0x10) { c_or_f = 1; // Fahrenheit } else { c_or_f = 0; // degrees Celsius } dt[0] = BNO055_TEMP_SOURCE; dt[1] = 0; _i2c.write(chip_addr, dt, 2, false); wait_ms(1); // Do I need to wait? dt[0] = BNO055_TEMP; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); if (c_or_f) { tmp->acc_chip = (int8_t)dt[0] * 2; } else { tmp->acc_chip = (int8_t)dt[0]; } dt[0] = BNO055_TEMP_SOURCE; dt[1] = 1; _i2c.write(chip_addr, dt, 2, false); wait_ms(1); // Do I need to wait? dt[0] = BNO055_TEMP; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); if (c_or_f) { tmp->gyr_chip = (int8_t)dt[0] * 2; } else { tmp->gyr_chip = (int8_t)dt[0]; } } /////////////// Initialize //////////////////////////////// void BNO055::initialize (void) { #if defined(TARGET_STM32L152RE) _i2c.frequency(100000); #else _i2c.frequency(400000); #endif // Check Acc & Mag & Gyro are available of not check_id(); // Set initial data set_initial_dt_to_regs(); // Unit selection unit_selection(); // Set fusion mode change_fusion_mode(chip_mode); } void BNO055::unit_selection(void) { select_page(0); dt[0] = BNO055_UNIT_SEL; dt[1] = UNIT_ORI_WIN + UNIT_ACC_MSS + UNIT_GYR_DPS + UNIT_EULER_DEG + UNIT_TEMP_C; _i2c.write(chip_addr, dt, 2, false); } uint8_t BNO055::select_page(uint8_t page) { dt[0] = BNO055_PAGE_ID; if (page == 1) { dt[1] = 1; // select page 1 } else { dt[1] = 0; // select page 0 } _i2c.write(chip_addr, dt, 2, false); dt[0] = BNO055_PAGE_ID; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); return dt[0]; } uint8_t BNO055::reset(void) { _res = 0; wait_ms(1); // Reset 1mS _res = 1; wait(0.7); // Need to wait at least 650mS #if defined(TARGET_STM32L152RE) _i2c.frequency(400000); #else _i2c.frequency(400000); #endif _i2c.stop(); check_id(); if (chip_id != I_AM_BNO055_CHIP){ return 1; } else { initialize(); return 0; } } ////// Set initialize data to related registers /////////// void BNO055::set_initial_dt_to_regs(void) { // select_page(0); // current setting is only used default values } /////////////// Check Who am I? /////////////////////////// void BNO055::check_id(void) { select_page(0); // ID dt[0] = BNO055_CHIP_ID; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 7, false); chip_id = dt[0]; if (chip_id == I_AM_BNO055_CHIP) { ready_flg = 1; } else { ready_flg = 0; } acc_id = dt[1]; if (acc_id == I_AM_BNO055_ACC) { ready_flg |= 2; } mag_id = dt[2]; if (mag_id == I_AM_BNO055_MAG) { ready_flg |= 4; } gyr_id = dt[3]; if (mag_id == I_AM_BNO055_MAG) { ready_flg |= 8; } bootldr_rev_id = dt[5]<< 8 | dt[4]; sw_rev_id = dt[6]; } void BNO055::read_id_inf(BNO055_ID_INF_TypeDef *id) { id->chip_id = chip_id; id->acc_id = acc_id; id->mag_id = mag_id; id->gyr_id = gyr_id; id->bootldr_rev_id = bootldr_rev_id; id->sw_rev_id = sw_rev_id; } /////////////// Check chip ready or not ////////////////// uint8_t BNO055::chip_ready() { if (ready_flg == 0x0f) { return 1; } return 0; } /////////////// Change Fusion mode /////////////////////// void BNO055::change_fusion_mode(uint8_t mode) { uint8_t current_mode; select_page(0); current_mode = check_operating_mode(); switch (mode) { case CONFIGMODE: dt[0] = BNO055_OPR_MODE; dt[1] = mode; _i2c.write(chip_addr, dt, 2, false); wait_ms(19); // wait 19mS break; case MODE_IMU: case MODE_COMPASS: case MODE_M4G: case MODE_NDOF_FMC_OFF: case MODE_NDOF: if (current_mode != CONFIGMODE) { // Can we change the mode directry? dt[0] = BNO055_OPR_MODE; dt[1] = CONFIGMODE; _i2c.write(chip_addr, dt, 2, false); wait_ms(19); // wait 19mS } dt[0] = BNO055_OPR_MODE; dt[1] = mode; _i2c.write(chip_addr, dt, 2, false); wait_ms(7); // wait 7mS break; default: break; } } uint8_t BNO055::check_operating_mode(void) { select_page(0); dt[0] = BNO055_OPR_MODE; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); return dt[0]; } /////////////// Set Mouting position ///////////////////// void BNO055::set_mounting_position(uint8_t position) { uint8_t remap_config; uint8_t remap_sign; uint8_t current_mode; current_mode = check_operating_mode(); change_fusion_mode(CONFIGMODE); switch (position) { case MT_P0: remap_config = 0x21; remap_sign = 0x04; break; case MT_P2: remap_config = 0x24; remap_sign = 0x06; break; case MT_P3: remap_config = 0x21; remap_sign = 0x02; break; case MT_P4: remap_config = 0x24; remap_sign = 0x03; break; case MT_P5: remap_config = 0x21; remap_sign = 0x01; break; case MT_P6: remap_config = 0x21; remap_sign = 0x07; break; case MT_P7: remap_config = 0x24; remap_sign = 0x05; break; case MT_P1: default: remap_config = 0x24; remap_sign = 0x00; break; } dt[0] = BNO055_AXIS_MAP_CONFIG; dt[1] = remap_config; dt[2] = remap_sign; _i2c.write(chip_addr, dt, 3, false); change_fusion_mode(current_mode); } /////////////// I2C Freq. ///////////////////////////////// void BNO055::frequency(int hz) { _i2c.frequency(hz); } /////////////// Read/Write specific register ////////////// uint8_t BNO055::read_reg0(uint8_t addr) { select_page(0); dt[0] = addr; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); return (uint8_t)dt[0]; } uint8_t BNO055::write_reg0(uint8_t addr, uint8_t data) { uint8_t current_mode; uint8_t d; current_mode = check_operating_mode(); change_fusion_mode(CONFIGMODE); dt[0] = addr; dt[1] = data; _i2c.write(chip_addr, dt, 2, false); d = dt[0]; change_fusion_mode(current_mode); return d; } uint8_t BNO055::read_reg1(uint8_t addr) { select_page(1); dt[0] = addr; _i2c.write(chip_addr, dt, 1, true); _i2c.read(chip_addr, dt, 1, false); return (uint8_t)dt[0]; } uint8_t BNO055::write_reg1(uint8_t addr, uint8_t data) { uint8_t current_mode; uint8_t d; current_mode = check_operating_mode(); change_fusion_mode(CONFIGMODE); select_page(1); dt[0] = addr; dt[1] = data; _i2c.write(chip_addr, dt, 2, false); d = dt[0]; change_fusion_mode(current_mode); return d; }