mbed library sources
Fork of mbed-src by
targets/cmsis/TARGET_NXP/TARGET_LPC81X/LPC8xx.h
- Committer:
- bogdanm
- Date:
- 2013-08-05
- Revision:
- 13:0645d8841f51
- Parent:
- vendor/NXP/LPC812/cmsis/LPC8xx.h@ 10:3bc89ef62ce7
File content as of revision 13:0645d8841f51:
/**************************************************************************** * $Id:: LPC8xx.h 6437 2012-10-31 11:06:06Z dep00694 $ * Project: NXP LPC8xx software example * * Description: * CMSIS Cortex-M0+ Core Peripheral Access Layer Header File for * NXP LPC800 Device Series * **************************************************************************** * Software that is described herein is for illustrative purposes only * which provides customers with programming information regarding the * products. This software is supplied "AS IS" without any warranties. * NXP Semiconductors assumes no responsibility or liability for the * use of the software, conveys no license or title under any patent, * copyright, or mask work right to the product. NXP Semiconductors * reserves the right to make changes in the software without * notification. NXP Semiconductors also make no representation or * warranty that such application will be suitable for the specified * use without further testing or modification. * Permission to use, copy, modify, and distribute this software and its * documentation is hereby granted, under NXP Semiconductors' * relevant copyright in the software, without fee, provided that it * is used in conjunction with NXP Semiconductors microcontrollers. This * copyright, permission, and disclaimer notice must appear in all copies of * this code. ****************************************************************************/ #ifndef __LPC8xx_H__ #define __LPC8xx_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup LPC8xx_Definitions LPC8xx Definitions This file defines all structures and symbols for LPC8xx: - Registers and bitfields - peripheral base address - PIO definitions @{ */ /******************************************************************************/ /* Processor and Core Peripherals */ /******************************************************************************/ /** @addtogroup LPC8xx_CMSIS LPC8xx CMSIS Definitions Configuration of the Cortex-M0+ Processor and Core Peripherals @{ */ /* * ========================================================================== * ---------- Interrupt Number Definition ----------------------------------- * ========================================================================== */ typedef enum IRQn { /****** Cortex-M0 Processor Exceptions Numbers ***************************************************/ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset*/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ /****** LPC8xx Specific Interrupt Numbers ********************************************************/ SPI0_IRQn = 0, /*!< SPI0 */ SPI1_IRQn = 1, /*!< SPI1 */ Reserved0_IRQn = 2, /*!< Reserved Interrupt */ UART0_IRQn = 3, /*!< USART0 */ UART1_IRQn = 4, /*!< USART1 */ UART2_IRQn = 5, /*!< USART2 */ Reserved1_IRQn = 6, /*!< Reserved Interrupt */ Reserved2_IRQn = 7, /*!< Reserved Interrupt */ I2C_IRQn = 8, /*!< I2C */ SCT_IRQn = 9, /*!< SCT */ MRT_IRQn = 10, /*!< MRT */ CMP_IRQn = 11, /*!< CMP */ WDT_IRQn = 12, /*!< WDT */ BOD_IRQn = 13, /*!< BOD */ Reserved3_IRQn = 14, /*!< Reserved Interrupt */ WKT_IRQn = 15, /*!< WKT Interrupt */ Reserved4_IRQn = 16, /*!< Reserved Interrupt */ Reserved5_IRQn = 17, /*!< Reserved Interrupt */ Reserved6_IRQn = 18, /*!< Reserved Interrupt */ Reserved7_IRQn = 19, /*!< Reserved Interrupt */ Reserved8_IRQn = 20, /*!< Reserved Interrupt */ Reserved9_IRQn = 21, /*!< Reserved Interrupt */ Reserved10_IRQn = 22, /*!< Reserved Interrupt */ Reserved11_IRQn = 23, /*!< Reserved Interrupt */ PININT0_IRQn = 24, /*!< External Interrupt 0 */ PININT1_IRQn = 25, /*!< External Interrupt 1 */ PININT2_IRQn = 26, /*!< External Interrupt 2 */ PININT3_IRQn = 27, /*!< External Interrupt 3 */ PININT4_IRQn = 28, /*!< External Interrupt 4 */ PININT5_IRQn = 29, /*!< External Interrupt 5 */ PININT6_IRQn = 30, /*!< External Interrupt 6 */ PININT7_IRQn = 31, /*!< External Interrupt 7 */ } IRQn_Type; /* * ========================================================================== * ----------- Processor and Core Peripheral Section ------------------------ * ========================================================================== */ /* Configuration of the Cortex-M0+ Processor and Core Peripherals */ #define __MPU_PRESENT 0 /*!< MPU present or not */ #define __VTOR_PRESENT 1 /**< Defines if an VTOR is present or not */ #define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ /*@}*/ /* end of group LPC8xx_CMSIS */ #include "core_cm0plus.h" /* Cortex-M0+ processor and core peripherals */ #include "system_LPC8xx.h" /* System Header */ /******************************************************************************/ /* Device Specific Peripheral Registers structures */ /******************************************************************************/ #if defined ( __CC_ARM ) #pragma anon_unions #endif /*------------- System Control (SYSCON) --------------------------------------*/ /** @addtogroup LPC8xx_SYSCON LPC8xx System Control Block @{ */ typedef struct { __IO uint32_t SYSMEMREMAP; /*!< Offset: 0x000 System memory remap (R/W) */ __IO uint32_t PRESETCTRL; /*!< Offset: 0x004 Peripheral reset control (R/W) */ __IO uint32_t SYSPLLCTRL; /*!< Offset: 0x008 System PLL control (R/W) */ __IO uint32_t SYSPLLSTAT; /*!< Offset: 0x00C System PLL status (R/W ) */ uint32_t RESERVED0[4]; __IO uint32_t SYSOSCCTRL; /*!< Offset: 0x020 System oscillator control (R/W) */ __IO uint32_t WDTOSCCTRL; /*!< Offset: 0x024 Watchdog oscillator control (R/W) */ uint32_t RESERVED1[2]; __IO uint32_t SYSRSTSTAT; /*!< Offset: 0x030 System reset status Register (R/W ) */ uint32_t RESERVED2[3]; __IO uint32_t SYSPLLCLKSEL; /*!< Offset: 0x040 System PLL clock source select (R/W) */ __IO uint32_t SYSPLLCLKUEN; /*!< Offset: 0x044 System PLL clock source update enable (R/W) */ uint32_t RESERVED3[10]; __IO uint32_t MAINCLKSEL; /*!< Offset: 0x070 Main clock source select (R/W) */ __IO uint32_t MAINCLKUEN; /*!< Offset: 0x074 Main clock source update enable (R/W) */ __IO uint32_t SYSAHBCLKDIV; /*!< Offset: 0x078 System AHB clock divider (R/W) */ uint32_t RESERVED4[1]; __IO uint32_t SYSAHBCLKCTRL; /*!< Offset: 0x080 System AHB clock control (R/W) */ uint32_t RESERVED5[4]; __IO uint32_t UARTCLKDIV; /*!< Offset: 0x094 UART clock divider (R/W) */ uint32_t RESERVED6[18]; __IO uint32_t CLKOUTSEL; /*!< Offset: 0x0E0 CLKOUT clock source select (R/W) */ __IO uint32_t CLKOUTUEN; /*!< Offset: 0x0E4 CLKOUT clock source update enable (R/W) */ __IO uint32_t CLKOUTDIV; /*!< Offset: 0x0E8 CLKOUT clock divider (R/W) */ uint32_t RESERVED7; __IO uint32_t UARTFRGDIV; /*!< Offset: 0x0F0 UART fractional divider SUB(R/W) */ __IO uint32_t UARTFRGMULT; /*!< Offset: 0x0F4 UART fractional divider ADD(R/W) */ uint32_t RESERVED8[1]; __IO uint32_t EXTTRACECMD; /*!< (@ 0x400480FC) External trace buffer command register */ __IO uint32_t PIOPORCAP0; /*!< Offset: 0x100 POR captured PIO status 0 (R/ ) */ uint32_t RESERVED9[12]; __IO uint32_t IOCONCLKDIV[7]; /*!< (@0x40048134-14C) Peripheral clock x to the IOCON block for programmable glitch filter */ __IO uint32_t BODCTRL; /*!< Offset: 0x150 BOD control (R/W) */ __IO uint32_t SYSTCKCAL; /*!< Offset: 0x154 System tick counter calibration (R/W) */ uint32_t RESERVED10[6]; __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IRQ delay */ __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */ __IO uint32_t PINTSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */ uint32_t RESERVED11[27]; __IO uint32_t STARTERP0; /*!< Offset: 0x204 Start logic signal enable Register 0 (R/W) */ uint32_t RESERVED12[3]; __IO uint32_t STARTERP1; /*!< Offset: 0x214 Start logic signal enable Register 0 (R/W) */ uint32_t RESERVED13[6]; __IO uint32_t PDSLEEPCFG; /*!< Offset: 0x230 Power-down states in Deep-sleep mode (R/W) */ __IO uint32_t PDAWAKECFG; /*!< Offset: 0x234 Power-down states after wake-up (R/W) */ __IO uint32_t PDRUNCFG; /*!< Offset: 0x238 Power-down configuration Register (R/W) */ uint32_t RESERVED14[110]; __I uint32_t DEVICE_ID; /*!< Offset: 0x3F4 Device ID (R/ ) */ } LPC_SYSCON_TypeDef; /*@}*/ /* end of group LPC8xx_SYSCON */ /** * @brief Product name title=UM10462 Chapter title=LPC8xx I/O configuration Modification date=3/16/2011 Major revision=0 Minor revision=3 (IOCONFIG) */ typedef struct { /*!< (@ 0x40044000) IOCONFIG Structure */ __IO uint32_t PIO0_17; /*!< (@ 0x40044000) I/O configuration for pin PIO0_17 */ __IO uint32_t PIO0_13; /*!< (@ 0x40044004) I/O configuration for pin PIO0_13 */ __IO uint32_t PIO0_12; /*!< (@ 0x40044008) I/O configuration for pin PIO0_12 */ __IO uint32_t PIO0_5; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_5 */ __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4 */ __IO uint32_t PIO0_3; /*!< (@ 0x40044014) I/O configuration for pin PIO0_3 */ __IO uint32_t PIO0_2; /*!< (@ 0x40044018) I/O configuration for pin PIO0_2 */ __IO uint32_t PIO0_11; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_11 */ __IO uint32_t PIO0_10; /*!< (@ 0x40044020) I/O configuration for pin PIO0_10 */ __IO uint32_t PIO0_16; /*!< (@ 0x40044024) I/O configuration for pin PIO0_16 */ __IO uint32_t PIO0_15; /*!< (@ 0x40044028) I/O configuration for pin PIO0_15 */ __IO uint32_t PIO0_1; /*!< (@ 0x4004402C) I/O configuration for pin PIO0_1 */ __IO uint32_t Reserved; /*!< (@ 0x40044030) I/O configuration for pin (Reserved) */ __IO uint32_t PIO0_9; /*!< (@ 0x40044034) I/O configuration for pin PIO0_9 */ __IO uint32_t PIO0_8; /*!< (@ 0x40044038) I/O configuration for pin PIO0_8 */ __IO uint32_t PIO0_7; /*!< (@ 0x4004403C) I/O configuration for pin PIO0_7 */ __IO uint32_t PIO0_6; /*!< (@ 0x40044040) I/O configuration for pin PIO0_6 */ __IO uint32_t PIO0_0; /*!< (@ 0x40044044) I/O configuration for pin PIO0_0 */ __IO uint32_t PIO0_14; /*!< (@ 0x40044048) I/O configuration for pin PIO0_14 */ } LPC_IOCON_TypeDef; /*@}*/ /* end of group LPC8xx_IOCON */ /** * @brief Product name title=UM10462 Chapter title=LPC8xx Flash programming firmware Major revision=0 Minor revision=3 (FLASHCTRL) */ typedef struct { /*!< (@ 0x40040000) FLASHCTRL Structure */ __I uint32_t RESERVED0[4]; __IO uint32_t FLASHCFG; /*!< (@ 0x40040010) Flash configuration register */ __I uint32_t RESERVED1[3]; __IO uint32_t FMSSTART; /*!< (@ 0x40040020) Signature start address register */ __IO uint32_t FMSSTOP; /*!< (@ 0x40040024) Signature stop-address register */ __I uint32_t RESERVED2; __I uint32_t FMSW0; } LPC_FLASHCTRL_TypeDef; /*@}*/ /* end of group LPC8xx_FLASHCTRL */ /*------------- Power Management Unit (PMU) --------------------------*/ /** @addtogroup LPC8xx_PMU LPC8xx Power Management Unit @{ */ typedef struct { __IO uint32_t PCON; /*!< Offset: 0x000 Power control Register (R/W) */ __IO uint32_t GPREG0; /*!< Offset: 0x004 General purpose Register 0 (R/W) */ __IO uint32_t GPREG1; /*!< Offset: 0x008 General purpose Register 1 (R/W) */ __IO uint32_t GPREG2; /*!< Offset: 0x00C General purpose Register 2 (R/W) */ __IO uint32_t GPREG3; /*!< Offset: 0x010 General purpose Register 3 (R/W) */ __IO uint32_t DPDCTRL; /*!< Offset: 0x014 Deep power-down control register (R/W) */ } LPC_PMU_TypeDef; /*@}*/ /* end of group LPC8xx_PMU */ /*------------- Switch Matrix Port --------------------------*/ /** @addtogroup LPC8xx_SWM LPC8xx Switch Matrix Port @{ */ typedef struct { union { __IO uint32_t PINASSIGN[9]; struct { __IO uint32_t PINASSIGN0; __IO uint32_t PINASSIGN1; __IO uint32_t PINASSIGN2; __IO uint32_t PINASSIGN3; __IO uint32_t PINASSIGN4; __IO uint32_t PINASSIGN5; __IO uint32_t PINASSIGN6; __IO uint32_t PINASSIGN7; __IO uint32_t PINASSIGN8; }; }; __I uint32_t RESERVED0[103]; __IO uint32_t PINENABLE0; } LPC_SWM_TypeDef; /*@}*/ /* end of group LPC8xx_SWM */ // ------------------------------------------------------------------------------------------------ // ----- GPIO_PORT ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC8xx GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PORT) */ typedef struct { __IO uint8_t B0[18]; /*!< (@ 0xA0000000) Byte pin registers port 0 */ __I uint16_t RESERVED0[2039]; __IO uint32_t W0[18]; /*!< (@ 0xA0001000) Word pin registers port 0 */ uint32_t RESERVED1[1006]; __IO uint32_t DIR0; /* 0x2000 */ uint32_t RESERVED2[31]; __IO uint32_t MASK0; /* 0x2080 */ uint32_t RESERVED3[31]; __IO uint32_t PIN0; /* 0x2100 */ uint32_t RESERVED4[31]; __IO uint32_t MPIN0; /* 0x2180 */ uint32_t RESERVED5[31]; __IO uint32_t SET0; /* 0x2200 */ uint32_t RESERVED6[31]; __O uint32_t CLR0; /* 0x2280 */ uint32_t RESERVED7[31]; __O uint32_t NOT0; /* 0x2300 */ } LPC_GPIO_PORT_TypeDef; // ------------------------------------------------------------------------------------------------ // ----- PIN_INT ----- // ------------------------------------------------------------------------------------------------ /** * @brief Product name title=UM10462 Chapter title=LPC8xx GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (PIN_INT) */ typedef struct { /*!< (@ 0xA0004000) PIN_INT Structure */ __IO uint32_t ISEL; /*!< (@ 0xA0004000) Pin Interrupt Mode register */ __IO uint32_t IENR; /*!< (@ 0xA0004004) Pin Interrupt Enable (Rising) register */ __IO uint32_t SIENR; /*!< (@ 0xA0004008) Set Pin Interrupt Enable (Rising) register */ __IO uint32_t CIENR; /*!< (@ 0xA000400C) Clear Pin Interrupt Enable (Rising) register */ __IO uint32_t IENF; /*!< (@ 0xA0004010) Pin Interrupt Enable Falling Edge / Active Level register */ __IO uint32_t SIENF; /*!< (@ 0xA0004014) Set Pin Interrupt Enable Falling Edge / Active Level register */ __IO uint32_t CIENF; /*!< (@ 0xA0004018) Clear Pin Interrupt Enable Falling Edge / Active Level address */ __IO uint32_t RISE; /*!< (@ 0xA000401C) Pin Interrupt Rising Edge register */ __IO uint32_t FALL; /*!< (@ 0xA0004020) Pin Interrupt Falling Edge register */ __IO uint32_t IST; /*!< (@ 0xA0004024) Pin Interrupt Status register */ __IO uint32_t PMCTRL; /*!< (@ 0xA0004028) GPIO pattern match interrupt control register */ __IO uint32_t PMSRC; /*!< (@ 0xA000402C) GPIO pattern match interrupt bit-slice source register */ __IO uint32_t PMCFG; /*!< (@ 0xA0004030) GPIO pattern match interrupt bit slice configuration register */ } LPC_PIN_INT_TypeDef; /*------------- CRC Engine (CRC) -----------------------------------------*/ /** @addtogroup LPC8xx_CRC @{ */ typedef struct { __IO uint32_t MODE; __IO uint32_t SEED; union { __I uint32_t SUM; __O uint32_t WR_DATA_DWORD; __O uint16_t WR_DATA_WORD; uint16_t RESERVED_WORD; __O uint8_t WR_DATA_BYTE; uint8_t RESERVED_BYTE[3]; }; } LPC_CRC_TypeDef; /*@}*/ /* end of group LPC8xx_CRC */ /*------------- Comparator (CMP) --------------------------------------------------*/ /** @addtogroup LPC8xx_CMP LPC8xx Comparator @{ */ typedef struct { /*!< (@ 0x40024000) CMP Structure */ __IO uint32_t CTRL; /*!< (@ 0x40024000) Comparator control register */ __IO uint32_t LAD; /*!< (@ 0x40024004) Voltage ladder register */ } LPC_CMP_TypeDef; /*@}*/ /* end of group LPC8xx_CMP */ /*------------- Wakeup Timer (WKT) --------------------------------------------------*/ /** @addtogroup LPC8xx_WKT @{ */ typedef struct { /*!< (@ 0x40028000) WKT Structure */ __IO uint32_t CTRL; /*!< (@ 0x40028000) Alarm/Wakeup Timer Control register */ uint32_t Reserved[2]; __IO uint32_t COUNT; /*!< (@ 0x4002800C) Alarm/Wakeup TImer counter register */ } LPC_WKT_TypeDef; /*@}*/ /* end of group LPC8xx_WKT */ /*------------- Multi-Rate Timer(MRT) --------------------------------------------------*/ typedef struct { __IO uint32_t INTVAL; __IO uint32_t TIMER; __IO uint32_t CTRL; __IO uint32_t STAT; } MRT_Channel_cfg_Type; typedef struct { MRT_Channel_cfg_Type Channel[4]; uint32_t Reserved0[1]; __IO uint32_t IDLE_CH; __IO uint32_t IRQ_FLAG; } LPC_MRT_TypeDef; /*------------- Universal Asynchronous Receiver Transmitter (USART) -----------*/ /** @addtogroup LPC8xx_UART LPC8xx Universal Asynchronous Receiver/Transmitter @{ */ /** * @brief Product name title=LPC8xx MCU Chapter title=USART Modification date=4/18/2012 Major revision=0 Minor revision=9 (USART) */ typedef struct { __IO uint32_t CFG; /* 0x00 */ __IO uint32_t CTRL; __IO uint32_t STAT; __IO uint32_t INTENSET; __O uint32_t INTENCLR; /* 0x10 */ __I uint32_t RXDATA; __I uint32_t RXDATA_STAT; __IO uint32_t TXDATA; __IO uint32_t BRG; /* 0x20 */ __IO uint32_t INTSTAT; } LPC_USART_TypeDef; /*@}*/ /* end of group LPC8xx_USART */ /*------------- Synchronous Serial Interface Controller (SPI) -----------------------*/ /** @addtogroup LPC8xx_SPI LPC8xx Synchronous Serial Port @{ */ typedef struct { __IO uint32_t CFG; /* 0x00 */ __IO uint32_t DLY; __IO uint32_t STAT; __IO uint32_t INTENSET; __O uint32_t INTENCLR; /* 0x10 */ __I uint32_t RXDAT; __IO uint32_t TXDATCTL; __IO uint32_t TXDAT; __IO uint32_t TXCTRL; /* 0x20 */ __IO uint32_t DIV; __I uint32_t INTSTAT; } LPC_SPI_TypeDef; /*@}*/ /* end of group LPC8xx_SPI */ /*------------- Inter-Integrated Circuit (I2C) -------------------------------*/ /** @addtogroup LPC8xx_I2C I2C-Bus Interface @{ */ typedef struct { __IO uint32_t CFG; /* 0x00 */ __IO uint32_t STAT; __IO uint32_t INTENSET; __O uint32_t INTENCLR; __IO uint32_t TIMEOUT; /* 0x10 */ __IO uint32_t DIV; __IO uint32_t INTSTAT; uint32_t Reserved0[1]; __IO uint32_t MSTCTL; /* 0x20 */ __IO uint32_t MSTTIME; __IO uint32_t MSTDAT; uint32_t Reserved1[5]; __IO uint32_t SLVCTL; /* 0x40 */ __IO uint32_t SLVDAT; __IO uint32_t SLVADR0; __IO uint32_t SLVADR1; __IO uint32_t SLVADR2; /* 0x50 */ __IO uint32_t SLVADR3; __IO uint32_t SLVQUAL0; uint32_t Reserved2[9]; __I uint32_t MONRXDAT; /* 0x80 */ } LPC_I2C_TypeDef; /*@}*/ /* end of group LPC8xx_I2C */ /** * @brief State Configurable Timer (SCT) (SCT) */ /** * @brief Product name title=UM10430 Chapter title=LPC8xx State Configurable Timer (SCT) Modification date=1/18/2011 Major revision=0 Minor revision=7 (SCT) */ #define CONFIG_SCT_nEV (6) /* Number of events */ #define CONFIG_SCT_nRG (5) /* Number of match/compare registers */ #define CONFIG_SCT_nOU (4) /* Number of outputs */ typedef struct { __IO uint32_t CONFIG; /* 0x000 Configuration Register */ union { __IO uint32_t CTRL_U; /* 0x004 Control Register */ struct { __IO uint16_t CTRL_L; /* 0x004 low control register */ __IO uint16_t CTRL_H; /* 0x006 high control register */ }; }; __IO uint16_t LIMIT_L; /* 0x008 limit register for counter L */ __IO uint16_t LIMIT_H; /* 0x00A limit register for counter H */ __IO uint16_t HALT_L; /* 0x00C halt register for counter L */ __IO uint16_t HALT_H; /* 0x00E halt register for counter H */ __IO uint16_t STOP_L; /* 0x010 stop register for counter L */ __IO uint16_t STOP_H; /* 0x012 stop register for counter H */ __IO uint16_t START_L; /* 0x014 start register for counter L */ __IO uint16_t START_H; /* 0x016 start register for counter H */ uint32_t RESERVED1[10]; /* 0x018-0x03C reserved */ union { __IO uint32_t COUNT_U; /* 0x040 counter register */ struct { __IO uint16_t COUNT_L; /* 0x040 counter register for counter L */ __IO uint16_t COUNT_H; /* 0x042 counter register for counter H */ }; }; __IO uint16_t STATE_L; /* 0x044 state register for counter L */ __IO uint16_t STATE_H; /* 0x046 state register for counter H */ __I uint32_t INPUT; /* 0x048 input register */ __IO uint16_t REGMODE_L; /* 0x04C match - capture registers mode register L */ __IO uint16_t REGMODE_H; /* 0x04E match - capture registers mode register H */ __IO uint32_t OUTPUT; /* 0x050 output register */ __IO uint32_t OUTPUTDIRCTRL; /* 0x054 Output counter direction Control Register */ __IO uint32_t RES; /* 0x058 conflict resolution register */ uint32_t RESERVED2[37]; /* 0x05C-0x0EC reserved */ __IO uint32_t EVEN; /* 0x0F0 event enable register */ __IO uint32_t EVFLAG; /* 0x0F4 event flag register */ __IO uint32_t CONEN; /* 0x0F8 conflict enable register */ __IO uint32_t CONFLAG; /* 0x0FC conflict flag register */ union { __IO union { /* 0x100-... Match / Capture value */ uint32_t U; /* SCTMATCH[i].U Unified 32-bit register */ struct { uint16_t L; /* SCTMATCH[i].L Access to L value */ uint16_t H; /* SCTMATCH[i].H Access to H value */ }; } MATCH[CONFIG_SCT_nRG]; __I union { uint32_t U; /* SCTCAP[i].U Unified 32-bit register */ struct { uint16_t L; /* SCTCAP[i].L Access to H value */ uint16_t H; /* SCTCAP[i].H Access to H value */ }; } CAP[CONFIG_SCT_nRG]; }; uint32_t RESERVED3[32-CONFIG_SCT_nRG]; /* ...-0x17C reserved */ union { __IO uint16_t MATCH_L[CONFIG_SCT_nRG]; /* 0x180-... Match Value L counter */ __I uint16_t CAP_L[CONFIG_SCT_nRG]; /* 0x180-... Capture Value L counter */ }; uint16_t RESERVED4[32-CONFIG_SCT_nRG]; /* ...-0x1BE reserved */ union { __IO uint16_t MATCH_H[CONFIG_SCT_nRG]; /* 0x1C0-... Match Value H counter */ __I uint16_t CAP_H[CONFIG_SCT_nRG]; /* 0x1C0-... Capture Value H counter */ }; uint16_t RESERVED5[32-CONFIG_SCT_nRG]; /* ...-0x1FE reserved */ union { __IO union { /* 0x200-... Match Reload / Capture Control value */ uint32_t U; /* SCTMATCHREL[i].U Unified 32-bit register */ struct { uint16_t L; /* SCTMATCHREL[i].L Access to L value */ uint16_t H; /* SCTMATCHREL[i].H Access to H value */ }; } MATCHREL[CONFIG_SCT_nRG]; __IO union { uint32_t U; /* SCTCAPCTRL[i].U Unified 32-bit register */ struct { uint16_t L; /* SCTCAPCTRL[i].L Access to H value */ uint16_t H; /* SCTCAPCTRL[i].H Access to H value */ }; } CAPCTRL[CONFIG_SCT_nRG]; }; uint32_t RESERVED6[32-CONFIG_SCT_nRG]; /* ...-0x27C reserved */ union { __IO uint16_t MATCHREL_L[CONFIG_SCT_nRG]; /* 0x280-... Match Reload value L counter */ __IO uint16_t CAPCTRL_L[CONFIG_SCT_nRG]; /* 0x280-... Capture Control value L counter */ }; uint16_t RESERVED7[32-CONFIG_SCT_nRG]; /* ...-0x2BE reserved */ union { __IO uint16_t MATCHREL_H[CONFIG_SCT_nRG]; /* 0x2C0-... Match Reload value H counter */ __IO uint16_t CAPCTRL_H[CONFIG_SCT_nRG]; /* 0x2C0-... Capture Control value H counter */ }; uint16_t RESERVED8[32-CONFIG_SCT_nRG]; /* ...-0x2FE reserved */ __IO struct { /* 0x300-0x3FC SCTEVENT[i].STATE / SCTEVENT[i].CTRL*/ uint32_t STATE; /* Event State Register */ uint32_t CTRL; /* Event Control Register */ } EVENT[CONFIG_SCT_nEV]; uint32_t RESERVED9[128-2*CONFIG_SCT_nEV]; /* ...-0x4FC reserved */ __IO struct { /* 0x500-0x57C SCTOUT[i].SET / SCTOUT[i].CLR */ uint32_t SET; /* Output n Set Register */ uint32_t CLR; /* Output n Clear Register */ } OUT[CONFIG_SCT_nOU]; uint32_t RESERVED10[191-2*CONFIG_SCT_nOU]; /* ...-0x7F8 reserved */ __I uint32_t MODULECONTENT; /* 0x7FC Module Content */ } LPC_SCT_TypeDef; /*@}*/ /* end of group LPC8xx_SCT */ /*------------- Watchdog Timer (WWDT) -----------------------------------------*/ /** @addtogroup LPC8xx_WDT LPC8xx WatchDog Timer @{ */ typedef struct { __IO uint32_t MOD; /*!< Offset: 0x000 Watchdog mode register (R/W) */ __IO uint32_t TC; /*!< Offset: 0x004 Watchdog timer constant register (R/W) */ __O uint32_t FEED; /*!< Offset: 0x008 Watchdog feed sequence register (W) */ __I uint32_t TV; /*!< Offset: 0x00C Watchdog timer value register (R) */ uint32_t RESERVED; /*!< Offset: 0x010 RESERVED */ __IO uint32_t WARNINT; /*!< Offset: 0x014 Watchdog timer warning int. register (R/W) */ __IO uint32_t WINDOW; /*!< Offset: 0x018 Watchdog timer window value register (R/W) */ } LPC_WWDT_TypeDef; /*@}*/ /* end of group LPC8xx_WDT */ #if defined ( __CC_ARM ) #pragma no_anon_unions #endif /******************************************************************************/ /* Peripheral memory map */ /******************************************************************************/ /* Base addresses */ #define LPC_FLASH_BASE (0x00000000UL) #define LPC_RAM_BASE (0x10000000UL) #define LPC_ROM_BASE (0x1FFF0000UL) #define LPC_APB0_BASE (0x40000000UL) #define LPC_AHB_BASE (0x50000000UL) /* APB0 peripherals */ #define LPC_WWDT_BASE (LPC_APB0_BASE + 0x00000) #define LPC_MRT_BASE (LPC_APB0_BASE + 0x04000) #define LPC_WKT_BASE (LPC_APB0_BASE + 0x08000) #define LPC_SWM_BASE (LPC_APB0_BASE + 0x0C000) #define LPC_PMU_BASE (LPC_APB0_BASE + 0x20000) #define LPC_CMP_BASE (LPC_APB0_BASE + 0x24000) #define LPC_FLASHCTRL_BASE (LPC_APB0_BASE + 0x40000) #define LPC_IOCON_BASE (LPC_APB0_BASE + 0x44000) #define LPC_SYSCON_BASE (LPC_APB0_BASE + 0x48000) #define LPC_I2C_BASE (LPC_APB0_BASE + 0x50000) #define LPC_SPI0_BASE (LPC_APB0_BASE + 0x58000) #define LPC_SPI1_BASE (LPC_APB0_BASE + 0x5C000) #define LPC_USART0_BASE (LPC_APB0_BASE + 0x64000) #define LPC_USART1_BASE (LPC_APB0_BASE + 0x68000) #define LPC_USART2_BASE (LPC_APB0_BASE + 0x6C000) /* AHB peripherals */ #define LPC_CRC_BASE (LPC_AHB_BASE + 0x00000) #define LPC_SCT_BASE (LPC_AHB_BASE + 0x04000) #define LPC_GPIO_PORT_BASE (0xA0000000) #define LPC_PIN_INT_BASE (LPC_GPIO_PORT_BASE + 0x4000) /******************************************************************************/ /* Peripheral declaration */ /******************************************************************************/ #define LPC_WWDT ((LPC_WWDT_TypeDef *) LPC_WWDT_BASE ) #define LPC_MRT ((LPC_MRT_TypeDef *) LPC_MRT_BASE ) #define LPC_WKT ((LPC_WKT_TypeDef *) LPC_WKT_BASE ) #define LPC_SWM ((LPC_SWM_TypeDef *) LPC_SWM_BASE ) #define LPC_PMU ((LPC_PMU_TypeDef *) LPC_PMU_BASE ) #define LPC_CMP ((LPC_CMP_TypeDef *) LPC_CMP_BASE ) #define LPC_FLASHCTRL ((LPC_FLASHCTRL_TypeDef *) LPC_FLASHCTRL_BASE ) #define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE ) #define LPC_SYSCON ((LPC_SYSCON_TypeDef *) LPC_SYSCON_BASE) #define LPC_I2C ((LPC_I2C_TypeDef *) LPC_I2C_BASE ) #define LPC_SPI0 ((LPC_SPI_TypeDef *) LPC_SPI0_BASE ) #define LPC_SPI1 ((LPC_SPI_TypeDef *) LPC_SPI1_BASE ) #define LPC_USART0 ((LPC_USART_TypeDef *) LPC_USART0_BASE ) #define LPC_USART1 ((LPC_USART_TypeDef *) LPC_USART1_BASE ) #define LPC_USART2 ((LPC_USART_TypeDef *) LPC_USART2_BASE ) #define LPC_CRC ((LPC_CRC_TypeDef *) LPC_CRC_BASE ) #define LPC_SCT ((LPC_SCT_TypeDef *) LPC_SCT_BASE ) #define LPC_GPIO_PORT ((LPC_GPIO_PORT_TypeDef *) LPC_GPIO_PORT_BASE ) #define LPC_PIN_INT ((LPC_PIN_INT_TypeDef *) LPC_PIN_INT_BASE ) #ifdef __cplusplus } #endif #endif /* __LPC8xx_H__ */