mohamed achour
hh
Dependents: VL53L0X-mbedOS-master VL53L0X-mbedOS-masterbb
Diff: vl53l0x_api_strings.h
- Revision:
- 0:e6fcdb78a136
diff -r 000000000000 -r e6fcdb78a136 vl53l0x_api_strings.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/vl53l0x_api_strings.h Tue Aug 23 05:14:05 2016 +0000
@@ -0,0 +1,277 @@
+/*******************************************************************************
+Copyright © 2016, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of STMicroelectronics nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+#ifndef VL53L0X_API_STRINGS_H_
+#define VL53L0X_API_STRINGS_H_
+
+#include "vl53l0x_def.h"
+#include "vl53l0x_platform.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+VL53L0X_Error VL53L0X_get_device_info(VL53L0X_DEV Dev,
+ VL53L0X_DeviceInfo_t *pVL53L0X_DeviceInfo);
+
+VL53L0X_Error VL53L0X_get_device_error_string(VL53L0X_DeviceError ErrorCode,
+ char *pDeviceErrorString);
+
+VL53L0X_Error VL53L0X_get_range_status_string(uint8_t RangeStatus,
+ char *pRangeStatusString);
+
+VL53L0X_Error VL53L0X_get_pal_error_string(VL53L0X_Error PalErrorCode,
+ char *pPalErrorString);
+
+VL53L0X_Error VL53L0X_get_pal_state_string(VL53L0X_State PalStateCode,
+ char *pPalStateString);
+
+VL53L0X_Error VL53L0X_get_sequence_steps_info(
+ VL53L0X_SequenceStepId SequenceStepId,
+ char *pSequenceStepsString);
+
+VL53L0X_Error VL53L0X_get_limit_check_info(VL53L0X_DEV Dev, uint16_t LimitCheckId,
+ char *pLimitCheckString);
+
+
+#ifdef USE_EMPTY_STRING
+ #define VL53L0X_STRING_DEVICE_INFO_NAME ""
+ #define VL53L0X_STRING_DEVICE_INFO_NAME_TS0 ""
+ #define VL53L0X_STRING_DEVICE_INFO_NAME_TS1 ""
+ #define VL53L0X_STRING_DEVICE_INFO_NAME_TS2 ""
+ #define VL53L0X_STRING_DEVICE_INFO_NAME_ES1 ""
+ #define VL53L0X_STRING_DEVICE_INFO_TYPE ""
+
+ /* PAL ERROR strings */
+ #define VL53L0X_STRING_ERROR_NONE ""
+ #define VL53L0X_STRING_ERROR_CALIBRATION_WARNING ""
+ #define VL53L0X_STRING_ERROR_MIN_CLIPPED ""
+ #define VL53L0X_STRING_ERROR_UNDEFINED ""
+ #define VL53L0X_STRING_ERROR_INVALID_PARAMS ""
+ #define VL53L0X_STRING_ERROR_NOT_SUPPORTED ""
+ #define VL53L0X_STRING_ERROR_RANGE_ERROR ""
+ #define VL53L0X_STRING_ERROR_TIME_OUT ""
+ #define VL53L0X_STRING_ERROR_MODE_NOT_SUPPORTED ""
+ #define VL53L0X_STRING_ERROR_BUFFER_TOO_SMALL ""
+ #define VL53L0X_STRING_ERROR_GPIO_NOT_EXISTING ""
+ #define VL53L0X_STRING_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED ""
+ #define VL53L0X_STRING_ERROR_CONTROL_INTERFACE ""
+ #define VL53L0X_STRING_ERROR_INVALID_COMMAND ""
+ #define VL53L0X_STRING_ERROR_DIVISION_BY_ZERO ""
+ #define VL53L0X_STRING_ERROR_REF_SPAD_INIT ""
+ #define VL53L0X_STRING_ERROR_NOT_IMPLEMENTED ""
+
+ #define VL53L0X_STRING_UNKNOW_ERROR_CODE ""
+
+
+
+ /* Range Status */
+ #define VL53L0X_STRING_RANGESTATUS_NONE ""
+ #define VL53L0X_STRING_RANGESTATUS_RANGEVALID ""
+ #define VL53L0X_STRING_RANGESTATUS_SIGMA ""
+ #define VL53L0X_STRING_RANGESTATUS_SIGNAL ""
+ #define VL53L0X_STRING_RANGESTATUS_MINRANGE ""
+ #define VL53L0X_STRING_RANGESTATUS_PHASE ""
+ #define VL53L0X_STRING_RANGESTATUS_HW ""
+
+
+ /* Range Status */
+ #define VL53L0X_STRING_STATE_POWERDOWN ""
+ #define VL53L0X_STRING_STATE_WAIT_STATICINIT ""
+ #define VL53L0X_STRING_STATE_STANDBY ""
+ #define VL53L0X_STRING_STATE_IDLE ""
+ #define VL53L0X_STRING_STATE_RUNNING ""
+ #define VL53L0X_STRING_STATE_UNKNOWN ""
+ #define VL53L0X_STRING_STATE_ERROR ""
+
+
+ /* Device Specific */
+ #define VL53L0X_STRING_DEVICEERROR_NONE ""
+ #define VL53L0X_STRING_DEVICEERROR_VCSELCONTINUITYTESTFAILURE ""
+ #define VL53L0X_STRING_DEVICEERROR_VCSELWATCHDOGTESTFAILURE ""
+ #define VL53L0X_STRING_DEVICEERROR_NOVHVVALUEFOUND ""
+ #define VL53L0X_STRING_DEVICEERROR_MSRCNOTARGET ""
+ #define VL53L0X_STRING_DEVICEERROR_SNRCHECK ""
+ #define VL53L0X_STRING_DEVICEERROR_RANGEPHASECHECK ""
+ #define VL53L0X_STRING_DEVICEERROR_SIGMATHRESHOLDCHECK ""
+ #define VL53L0X_STRING_DEVICEERROR_TCC ""
+ #define VL53L0X_STRING_DEVICEERROR_PHASECONSISTENCY ""
+ #define VL53L0X_STRING_DEVICEERROR_MINCLIP ""
+ #define VL53L0X_STRING_DEVICEERROR_RANGECOMPLETE ""
+ #define VL53L0X_STRING_DEVICEERROR_ALGOUNDERFLOW ""
+ #define VL53L0X_STRING_DEVICEERROR_ALGOOVERFLOW ""
+ #define VL53L0X_STRING_DEVICEERROR_RANGEIGNORETHRESHOLD ""
+ #define VL53L0X_STRING_DEVICEERROR_UNKNOWN ""
+
+ /* Check Enable */
+ #define VL53L0X_STRING_CHECKENABLE_SIGMA_FINAL_RANGE ""
+ #define VL53L0X_STRING_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE ""
+ #define VL53L0X_STRING_CHECKENABLE_SIGNAL_REF_CLIP ""
+ #define VL53L0X_STRING_CHECKENABLE_RANGE_IGNORE_THRESHOLD ""
+
+ /* Sequence Step */
+ #define VL53L0X_STRING_SEQUENCESTEP_TCC ""
+ #define VL53L0X_STRING_SEQUENCESTEP_DSS ""
+ #define VL53L0X_STRING_SEQUENCESTEP_MSRC ""
+ #define VL53L0X_STRING_SEQUENCESTEP_PRE_RANGE ""
+ #define VL53L0X_STRING_SEQUENCESTEP_FINAL_RANGE ""
+#else
+ #define VL53L0X_STRING_DEVICE_INFO_NAME "VL53L0X cut1.0"
+ #define VL53L0X_STRING_DEVICE_INFO_NAME_TS0 "VL53L0X TS0"
+ #define VL53L0X_STRING_DEVICE_INFO_NAME_TS1 "VL53L0X TS1"
+ #define VL53L0X_STRING_DEVICE_INFO_NAME_TS2 "VL53L0X TS2"
+ #define VL53L0X_STRING_DEVICE_INFO_NAME_ES1 "VL53L0X ES1 or later"
+ #define VL53L0X_STRING_DEVICE_INFO_TYPE "VL53L0X"
+
+ /* PAL ERROR strings */
+ #define VL53L0X_STRING_ERROR_NONE \
+ "No Error"
+ #define VL53L0X_STRING_ERROR_CALIBRATION_WARNING \
+ "Calibration Warning Error"
+ #define VL53L0X_STRING_ERROR_MIN_CLIPPED \
+ "Min clipped error"
+ #define VL53L0X_STRING_ERROR_UNDEFINED \
+ "Undefined error"
+ #define VL53L0X_STRING_ERROR_INVALID_PARAMS \
+ "Invalid parameters error"
+ #define VL53L0X_STRING_ERROR_NOT_SUPPORTED \
+ "Not supported error"
+ #define VL53L0X_STRING_ERROR_RANGE_ERROR \
+ "Range error"
+ #define VL53L0X_STRING_ERROR_TIME_OUT \
+ "Time out error"
+ #define VL53L0X_STRING_ERROR_MODE_NOT_SUPPORTED \
+ "Mode not supported error"
+ #define VL53L0X_STRING_ERROR_BUFFER_TOO_SMALL \
+ "Buffer too small"
+ #define VL53L0X_STRING_ERROR_GPIO_NOT_EXISTING \
+ "GPIO not existing"
+ #define VL53L0X_STRING_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED \
+ "GPIO funct not supported"
+ #define VL53L0X_STRING_ERROR_INTERRUPT_NOT_CLEARED \
+ "Interrupt not Cleared"
+ #define VL53L0X_STRING_ERROR_CONTROL_INTERFACE \
+ "Control Interface Error"
+ #define VL53L0X_STRING_ERROR_INVALID_COMMAND \
+ "Invalid Command Error"
+ #define VL53L0X_STRING_ERROR_DIVISION_BY_ZERO \
+ "Division by zero Error"
+ #define VL53L0X_STRING_ERROR_REF_SPAD_INIT \
+ "Reference Spad Init Error"
+ #define VL53L0X_STRING_ERROR_NOT_IMPLEMENTED \
+ "Not implemented error"
+
+ #define VL53L0X_STRING_UNKNOW_ERROR_CODE \
+ "Unknown Error Code"
+
+
+
+ /* Range Status */
+ #define VL53L0X_STRING_RANGESTATUS_NONE "No Update"
+ #define VL53L0X_STRING_RANGESTATUS_RANGEVALID "Range Valid"
+ #define VL53L0X_STRING_RANGESTATUS_SIGMA "Sigma Fail"
+ #define VL53L0X_STRING_RANGESTATUS_SIGNAL "Signal Fail"
+ #define VL53L0X_STRING_RANGESTATUS_MINRANGE "Min Range Fail"
+ #define VL53L0X_STRING_RANGESTATUS_PHASE "Phase Fail"
+ #define VL53L0X_STRING_RANGESTATUS_HW "Hardware Fail"
+
+
+ /* Range Status */
+ #define VL53L0X_STRING_STATE_POWERDOWN "POWERDOWN State"
+ #define VL53L0X_STRING_STATE_WAIT_STATICINIT \
+ "Wait for staticinit State"
+ #define VL53L0X_STRING_STATE_STANDBY "STANDBY State"
+ #define VL53L0X_STRING_STATE_IDLE "IDLE State"
+ #define VL53L0X_STRING_STATE_RUNNING "RUNNING State"
+ #define VL53L0X_STRING_STATE_UNKNOWN "UNKNOWN State"
+ #define VL53L0X_STRING_STATE_ERROR "ERROR State"
+
+
+ /* Device Specific */
+ #define VL53L0X_STRING_DEVICEERROR_NONE "No Update"
+ #define VL53L0X_STRING_DEVICEERROR_VCSELCONTINUITYTESTFAILURE \
+ "VCSEL Continuity Test Failure"
+ #define VL53L0X_STRING_DEVICEERROR_VCSELWATCHDOGTESTFAILURE \
+ "VCSEL Watchdog Test Failure"
+ #define VL53L0X_STRING_DEVICEERROR_NOVHVVALUEFOUND \
+ "No VHV Value found"
+ #define VL53L0X_STRING_DEVICEERROR_MSRCNOTARGET \
+ "MSRC No Target Error"
+ #define VL53L0X_STRING_DEVICEERROR_SNRCHECK \
+ "SNR Check Exit"
+ #define VL53L0X_STRING_DEVICEERROR_RANGEPHASECHECK \
+ "Range Phase Check Error"
+ #define VL53L0X_STRING_DEVICEERROR_SIGMATHRESHOLDCHECK \
+ "Sigma Threshold Check Error"
+ #define VL53L0X_STRING_DEVICEERROR_TCC \
+ "TCC Error"
+ #define VL53L0X_STRING_DEVICEERROR_PHASECONSISTENCY \
+ "Phase Consistency Error"
+ #define VL53L0X_STRING_DEVICEERROR_MINCLIP \
+ "Min Clip Error"
+ #define VL53L0X_STRING_DEVICEERROR_RANGECOMPLETE \
+ "Range Complete"
+ #define VL53L0X_STRING_DEVICEERROR_ALGOUNDERFLOW \
+ "Range Algo Underflow Error"
+ #define VL53L0X_STRING_DEVICEERROR_ALGOOVERFLOW \
+ "Range Algo Overlow Error"
+ #define VL53L0X_STRING_DEVICEERROR_RANGEIGNORETHRESHOLD \
+ "Range Ignore Threshold Error"
+ #define VL53L0X_STRING_DEVICEERROR_UNKNOWN \
+ "Unknown error code"
+
+ /* Check Enable */
+ #define VL53L0X_STRING_CHECKENABLE_SIGMA_FINAL_RANGE \
+ "SIGMA FINAL RANGE"
+ #define VL53L0X_STRING_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE \
+ "SIGNAL RATE FINAL RANGE"
+ #define VL53L0X_STRING_CHECKENABLE_SIGNAL_REF_CLIP \
+ "SIGNAL REF CLIP"
+ #define VL53L0X_STRING_CHECKENABLE_RANGE_IGNORE_THRESHOLD \
+ "RANGE IGNORE THRESHOLD"
+ #define VL53L0X_STRING_CHECKENABLE_SIGNAL_RATE_MSRC \
+ "SIGNAL RATE MSRC"
+ #define VL53L0X_STRING_CHECKENABLE_SIGNAL_RATE_PRE_RANGE \
+ "SIGNAL RATE PRE RANGE"
+
+ /* Sequence Step */
+ #define VL53L0X_STRING_SEQUENCESTEP_TCC "TCC"
+ #define VL53L0X_STRING_SEQUENCESTEP_DSS "DSS"
+ #define VL53L0X_STRING_SEQUENCESTEP_MSRC "MSRC"
+ #define VL53L0X_STRING_SEQUENCESTEP_PRE_RANGE "PRE RANGE"
+ #define VL53L0X_STRING_SEQUENCESTEP_FINAL_RANGE "FINAL RANGE"
+#endif /* USE_EMPTY_STRING */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+