mohamed achour
hh
Dependents: VL53L0X-mbedOS-master VL53L0X-mbedOS-masterbb
Diff: vl53l0x_api.h
- Revision:
- 0:e6fcdb78a136
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/vl53l0x_api.h Tue Aug 23 05:14:05 2016 +0000
@@ -0,0 +1,1950 @@
+/*******************************************************************************
+ Copyright © 2016, STMicroelectronics International N.V.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of STMicroelectronics nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+ NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+ IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef _VL53L0X_API_H_
+#define _VL53L0X_API_H_
+
+#include "vl53l0x_api_strings.h"
+#include "vl53l0x_def.h"
+#include "vl53l0x_platform.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#ifdef _MSC_VER
+# ifdef VL53L0X_API_EXPORTS
+# define VL53L0X_API __declspec(dllexport)
+# else
+# define VL53L0X_API
+# endif
+#else
+# define VL53L0X_API
+#endif
+
+/** @defgroup VL53L0X_cut11_group VL53L0X cut1.1 Function Definition
+ * @brief VL53L0X cut1.1 Function Definition
+ * @{
+ */
+
+/** @defgroup VL53L0X_general_group VL53L0X General Functions
+ * @brief General functions and definitions
+ * @{
+ */
+
+/**
+ * @brief Return the VL53L0X PAL Implementation Version
+ *
+ * @note This function doesn't access to the device
+ *
+ * @param pVersion Pointer to current PAL Implementation Version
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetVersion(VL53L0X_Version_t *pVersion);
+
+/**
+ * @brief Return the PAL Specification Version used for the current
+ * implementation.
+ *
+ * @note This function doesn't access to the device
+ *
+ * @param pPalSpecVersion Pointer to current PAL Specification Version
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetPalSpecVersion(
+ VL53L0X_Version_t *pPalSpecVersion);
+
+/**
+ * @brief Reads the Product Revision for a for given Device
+ * This function can be used to distinguish cut1.0 from cut1.1.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pProductRevisionMajor Pointer to Product Revision Major
+ * for a given Device
+ * @param pProductRevisionMinor Pointer to Product Revision Minor
+ * for a given Device
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetProductRevision(VL53L0X_DEV Dev,
+ uint8_t *pProductRevisionMajor, uint8_t *pProductRevisionMinor);
+
+/**
+ * @brief Reads the Device information for given Device
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pVL53L0X_DeviceInfo Pointer to current device info for a given
+ * Device
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetDeviceInfo(VL53L0X_DEV Dev,
+ VL53L0X_DeviceInfo_t *pVL53L0X_DeviceInfo);
+
+/**
+ * @brief Read current status of the error register for the selected device
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pDeviceErrorStatus Pointer to current error code of the device
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetDeviceErrorStatus(VL53L0X_DEV Dev,
+ VL53L0X_DeviceError *pDeviceErrorStatus);
+
+/**
+ * @brief Human readable Range Status string for a given RangeStatus
+ *
+ * @note This function doesn't access to the device
+ *
+ * @param RangeStatus The RangeStatus code as stored on
+ * @a VL53L0X_RangingMeasurementData_t
+ * @param pRangeStatusString The returned RangeStatus string.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetRangeStatusString(uint8_t RangeStatus,
+ char *pRangeStatusString);
+
+/**
+ * @brief Human readable error string for a given Error Code
+ *
+ * @note This function doesn't access to the device
+ *
+ * @param ErrorCode The error code as stored on ::VL53L0X_DeviceError
+ * @param pDeviceErrorString The error string corresponding to the ErrorCode
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetDeviceErrorString(
+ VL53L0X_DeviceError ErrorCode, char *pDeviceErrorString);
+
+/**
+ * @brief Human readable error string for current PAL error status
+ *
+ * @note This function doesn't access to the device
+ *
+ * @param PalErrorCode The error code as stored on @a VL53L0X_Error
+ * @param pPalErrorString The error string corresponding to the
+ * PalErrorCode
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetPalErrorString(VL53L0X_Error PalErrorCode,
+ char *pPalErrorString);
+
+/**
+ * @brief Human readable PAL State string
+ *
+ * @note This function doesn't access to the device
+ *
+ * @param PalStateCode The State code as stored on @a VL53L0X_State
+ * @param pPalStateString The State string corresponding to the
+ * PalStateCode
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetPalStateString(VL53L0X_State PalStateCode,
+ char *pPalStateString);
+
+/**
+ * @brief Reads the internal state of the PAL for a given Device
+ *
+ * @note This function doesn't access to the device
+ *
+ * @param Dev Device Handle
+ * @param pPalState Pointer to current state of the PAL for a
+ * given Device
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetPalState(VL53L0X_DEV Dev,
+ VL53L0X_State *pPalState);
+
+/**
+ * @brief Set the power mode for a given Device
+ * The power mode can be Standby or Idle. Different level of both Standby and
+ * Idle can exists.
+ * This function should not be used when device is in Ranging state.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param PowerMode The value of the power mode to set.
+ * see ::VL53L0X_PowerModes
+ * Valid values are:
+ * VL53L0X_POWERMODE_STANDBY_LEVEL1,
+ * VL53L0X_POWERMODE_IDLE_LEVEL1
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_MODE_NOT_SUPPORTED This error occurs when PowerMode
+ * is not in the supported list
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetPowerMode(VL53L0X_DEV Dev,
+ VL53L0X_PowerModes PowerMode);
+
+/**
+ * @brief Get the power mode for a given Device
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pPowerMode Pointer to the current value of the power
+ * mode. see ::VL53L0X_PowerModes
+ * Valid values are:
+ * VL53L0X_POWERMODE_STANDBY_LEVEL1,
+ * VL53L0X_POWERMODE_IDLE_LEVEL1
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetPowerMode(VL53L0X_DEV Dev,
+ VL53L0X_PowerModes *pPowerMode);
+
+/**
+ * Set or over-hide part to part calibration offset
+ * \sa VL53L0X_DataInit() VL53L0X_GetOffsetCalibrationDataMicroMeter()
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param OffsetCalibrationDataMicroMeter Offset (microns)
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetOffsetCalibrationDataMicroMeter(
+ VL53L0X_DEV Dev, int32_t OffsetCalibrationDataMicroMeter);
+
+/**
+ * @brief Get part to part calibration offset
+ *
+ * @par Function Description
+ * Should only be used after a successful call to @a VL53L0X_DataInit to backup
+ * device NVM value
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pOffsetCalibrationDataMicroMeter Return part to part
+ * calibration offset from device (microns)
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetOffsetCalibrationDataMicroMeter(
+ VL53L0X_DEV Dev, int32_t *pOffsetCalibrationDataMicroMeter);
+
+/**
+ * Set the linearity corrective gain
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param LinearityCorrectiveGain Linearity corrective
+ * gain in x1000
+ * if value is 1000 then no modification is applied.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetLinearityCorrectiveGain(VL53L0X_DEV Dev,
+ int16_t LinearityCorrectiveGain);
+
+/**
+ * @brief Get the linearity corrective gain
+ *
+ * @par Function Description
+ * Should only be used after a successful call to @a VL53L0X_DataInit to backup
+ * device NVM value
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pLinearityCorrectiveGain Pointer to the linearity
+ * corrective gain in x1000
+ * if value is 1000 then no modification is applied.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetLinearityCorrectiveGain(VL53L0X_DEV Dev,
+ uint16_t *pLinearityCorrectiveGain);
+
+/**
+ * Set Group parameter Hold state
+ *
+ * @par Function Description
+ * Set or remove device internal group parameter hold
+ *
+ * @note This function is not Implemented
+ *
+ * @param Dev Device Handle
+ * @param GroupParamHold Group parameter Hold state to be set (on/off)
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetGroupParamHold(VL53L0X_DEV Dev,
+ uint8_t GroupParamHold);
+
+/**
+ * @brief Get the maximal distance for actual setup
+ * @par Function Description
+ * Device must be initialized through @a VL53L0X_SetParameters() prior calling
+ * this function.
+ *
+ * Any range value more than the value returned is to be considered as
+ * "no target detected" or
+ * "no target in detectable range"\n
+ * @warning The maximal distance depends on the setup
+ *
+ * @note This function is not Implemented
+ *
+ * @param Dev Device Handle
+ * @param pUpperLimitMilliMeter The maximal range limit for actual setup
+ * (in millimeter)
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetUpperLimitMilliMeter(VL53L0X_DEV Dev,
+ uint16_t *pUpperLimitMilliMeter);
+
+
+/**
+ * @brief Get the Total Signal Rate
+ * @par Function Description
+ * This function will return the Total Signal Rate after a good ranging is done.
+ *
+ * @note This function access to Device
+ *
+ * @param Dev Device Handle
+ * @param pTotalSignalRate Total Signal Rate value in Mega count per second
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_GetTotalSignalRate(VL53L0X_DEV Dev,
+ FixPoint1616_t *pTotalSignalRate);
+
+/** @} VL53L0X_general_group */
+
+/** @defgroup VL53L0X_init_group VL53L0X Init Functions
+ * @brief VL53L0X Init Functions
+ * @{
+ */
+
+/**
+ * @brief Set new device address
+ *
+ * After completion the device will answer to the new address programmed.
+ * This function should be called when several devices are used in parallel
+ * before start programming the sensor.
+ * When a single device us used, there is no need to call this function.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param DeviceAddress The new Device address
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetDeviceAddress(VL53L0X_DEV Dev,
+ uint8_t DeviceAddress);
+
+/**
+ *
+ * @brief One time device initialization
+ *
+ * To be called once and only once after device is brought out of reset
+ * (Chip enable) and booted see @a VL53L0X_WaitDeviceBooted()
+ *
+ * @par Function Description
+ * When not used after a fresh device "power up" or reset, it may return
+ * @a #VL53L0X_ERROR_CALIBRATION_WARNING meaning wrong calibration data
+ * may have been fetched from device that can result in ranging offset error\n
+ * If application cannot execute device reset or need to run VL53L0X_DataInit
+ * multiple time then it must ensure proper offset calibration saving and
+ * restore on its own by using @a VL53L0X_GetOffsetCalibrationData() on first
+ * power up and then @a VL53L0X_SetOffsetCalibrationData() in all subsequent init
+ * This function will change the VL53L0X_State from VL53L0X_STATE_POWERDOWN to
+ * VL53L0X_STATE_WAIT_STATICINIT.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_DataInit(VL53L0X_DEV Dev);
+
+/**
+ * @brief Set the tuning settings pointer
+ *
+ * This function is used to specify the Tuning settings buffer to be used
+ * for a given device. The buffer contains all the necessary data to permit
+ * the API to write tuning settings.
+ * This function permit to force the usage of either external or internal
+ * tuning settings.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pTuningSettingBuffer Pointer to tuning settings buffer.
+ * @param UseInternalTuningSettings Use internal tuning settings value.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetTuningSettingBuffer(VL53L0X_DEV Dev,
+ uint8_t *pTuningSettingBuffer, uint8_t UseInternalTuningSettings);
+
+/**
+ * @brief Get the tuning settings pointer and the internal external switch
+ * value.
+ *
+ * This function is used to get the Tuning settings buffer pointer and the
+ * value.
+ * of the switch to select either external or internal tuning settings.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param ppTuningSettingBuffer Pointer to tuning settings buffer.
+ * @param pUseInternalTuningSettings Pointer to store Use internal tuning
+ * settings value.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetTuningSettingBuffer(VL53L0X_DEV Dev,
+ uint8_t **ppTuningSettingBuffer, uint8_t *pUseInternalTuningSettings);
+
+/**
+ * @brief Do basic device init (and eventually patch loading)
+ * This function will change the VL53L0X_State from
+ * VL53L0X_STATE_WAIT_STATICINIT to VL53L0X_STATE_IDLE.
+ * In this stage all default setting will be applied.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_StaticInit(VL53L0X_DEV Dev);
+
+/**
+ * @brief Wait for device booted after chip enable (hardware standby)
+ * This function can be run only when VL53L0X_State is VL53L0X_STATE_POWERDOWN.
+ *
+ * @note This function is not Implemented
+ *
+ * @param Dev Device Handle
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ *
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_WaitDeviceBooted(VL53L0X_DEV Dev);
+
+/**
+ * @brief Do an hard reset or soft reset (depending on implementation) of the
+ * device \nAfter call of this function, device must be in same state as right
+ * after a power-up sequence.This function will change the VL53L0X_State to
+ * VL53L0X_STATE_POWERDOWN.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_ResetDevice(VL53L0X_DEV Dev);
+
+/** @} VL53L0X_init_group */
+
+/** @defgroup VL53L0X_parameters_group VL53L0X Parameters Functions
+ * @brief Functions used to prepare and setup the device
+ * @{
+ */
+
+/**
+ * @brief Prepare device for operation
+ * @par Function Description
+ * Update device with provided parameters
+ * @li Then start ranging operation.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pDeviceParameters Pointer to store current device parameters.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetDeviceParameters(VL53L0X_DEV Dev,
+ const VL53L0X_DeviceParameters_t *pDeviceParameters);
+
+/**
+ * @brief Retrieve current device parameters
+ * @par Function Description
+ * Get actual parameters of the device
+ * @li Then start ranging operation.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pDeviceParameters Pointer to store current device parameters.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetDeviceParameters(VL53L0X_DEV Dev,
+ VL53L0X_DeviceParameters_t *pDeviceParameters);
+
+/**
+ * @brief Set a new device mode
+ * @par Function Description
+ * Set device to a new mode (ranging, histogram ...)
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param DeviceMode New device mode to apply
+ * Valid values are:
+ * VL53L0X_DEVICEMODE_SINGLE_RANGING
+ * VL53L0X_DEVICEMODE_CONTINUOUS_RANGING
+ * VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING
+ * VL53L0X_DEVICEMODE_SINGLE_HISTOGRAM
+ * VL53L0X_HISTOGRAMMODE_REFERENCE_ONLY
+ * VL53L0X_HISTOGRAMMODE_RETURN_ONLY
+ * VL53L0X_HISTOGRAMMODE_BOTH
+ *
+ *
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_MODE_NOT_SUPPORTED This error occurs when DeviceMode is
+ * not in the supported list
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetDeviceMode(VL53L0X_DEV Dev,
+ VL53L0X_DeviceModes DeviceMode);
+
+/**
+ * @brief Get current new device mode
+ * @par Function Description
+ * Get actual mode of the device(ranging, histogram ...)
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pDeviceMode Pointer to current apply mode value
+ * Valid values are:
+ * VL53L0X_DEVICEMODE_SINGLE_RANGING
+ * VL53L0X_DEVICEMODE_CONTINUOUS_RANGING
+ * VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING
+ * VL53L0X_DEVICEMODE_SINGLE_HISTOGRAM
+ * VL53L0X_HISTOGRAMMODE_REFERENCE_ONLY
+ * VL53L0X_HISTOGRAMMODE_RETURN_ONLY
+ * VL53L0X_HISTOGRAMMODE_BOTH
+ *
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_MODE_NOT_SUPPORTED This error occurs when
+ * DeviceMode is not in the supported list
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetDeviceMode(VL53L0X_DEV Dev,
+ VL53L0X_DeviceModes *pDeviceMode);
+
+/**
+ * @brief Sets the resolution of range measurements.
+ * @par Function Description
+ * Set resolution of range measurements to either 0.25mm if
+ * fraction enabled or 1mm if not enabled.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param Enable Enable high resolution
+ *
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetRangeFractionEnable(VL53L0X_DEV Dev,
+ uint8_t Enable);
+
+/**
+ * @brief Gets the fraction enable parameter indicating the resolution of
+ * range measurements.
+ *
+ * @par Function Description
+ * Gets the fraction enable state, which translates to the resolution of
+ * range measurements as follows :Enabled:=0.25mm resolution,
+ * Not Enabled:=1mm resolution.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param pEnable Output Parameter reporting the fraction enable state.
+ *
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetFractionEnable(VL53L0X_DEV Dev,
+ uint8_t *pEnable);
+
+/**
+ * @brief Set a new Histogram mode
+ * @par Function Description
+ * Set device to a new Histogram mode
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param HistogramMode New device mode to apply
+ * Valid values are:
+ * VL53L0X_HISTOGRAMMODE_DISABLED
+ * VL53L0X_DEVICEMODE_SINGLE_HISTOGRAM
+ * VL53L0X_HISTOGRAMMODE_REFERENCE_ONLY
+ * VL53L0X_HISTOGRAMMODE_RETURN_ONLY
+ * VL53L0X_HISTOGRAMMODE_BOTH
+ *
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_MODE_NOT_SUPPORTED This error occurs when
+ * HistogramMode is not in the supported list
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetHistogramMode(VL53L0X_DEV Dev,
+ VL53L0X_HistogramModes HistogramMode);
+
+/**
+ * @brief Get current new device mode
+ * @par Function Description
+ * Get current Histogram mode of a Device
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pHistogramMode Pointer to current Histogram Mode value
+ * Valid values are:
+ * VL53L0X_HISTOGRAMMODE_DISABLED
+ * VL53L0X_DEVICEMODE_SINGLE_HISTOGRAM
+ * VL53L0X_HISTOGRAMMODE_REFERENCE_ONLY
+ * VL53L0X_HISTOGRAMMODE_RETURN_ONLY
+ * VL53L0X_HISTOGRAMMODE_BOTH
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetHistogramMode(VL53L0X_DEV Dev,
+ VL53L0X_HistogramModes *pHistogramMode);
+
+/**
+ * @brief Set Ranging Timing Budget in microseconds
+ *
+ * @par Function Description
+ * Defines the maximum time allowed by the user to the device to run a
+ * full ranging sequence for the current mode (ranging, histogram, ASL ...)
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param MeasurementTimingBudgetMicroSeconds Max measurement time in
+ * microseconds.
+ * Valid values are:
+ * >= 17000 microsecs when wraparound enabled
+ * >= 12000 microsecs when wraparound disabled
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is returned if
+ MeasurementTimingBudgetMicroSeconds out of range
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetMeasurementTimingBudgetMicroSeconds(
+ VL53L0X_DEV Dev, uint32_t MeasurementTimingBudgetMicroSeconds);
+
+/**
+ * @brief Get Ranging Timing Budget in microseconds
+ *
+ * @par Function Description
+ * Returns the programmed the maximum time allowed by the user to the
+ * device to run a full ranging sequence for the current mode
+ * (ranging, histogram, ASL ...)
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pMeasurementTimingBudgetMicroSeconds Max measurement time in
+ * microseconds.
+ * Valid values are:
+ * >= 17000 microsecs when wraparound enabled
+ * >= 12000 microsecs when wraparound disabled
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetMeasurementTimingBudgetMicroSeconds(
+ VL53L0X_DEV Dev, uint32_t *pMeasurementTimingBudgetMicroSeconds);
+
+/**
+ * @brief Gets the VCSEL pulse period.
+ *
+ * @par Function Description
+ * This function retrieves the VCSEL pulse period for the given period type.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param VcselPeriodType VCSEL period identifier (pre-range|final).
+ * @param pVCSELPulsePeriod Pointer to VCSEL period value.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS Error VcselPeriodType parameter not
+ * supported.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetVcselPulsePeriod(VL53L0X_DEV Dev,
+ VL53L0X_VcselPeriod VcselPeriodType, uint8_t *pVCSELPulsePeriod);
+
+/**
+ * @brief Sets the VCSEL pulse period.
+ *
+ * @par Function Description
+ * This function retrieves the VCSEL pulse period for the given period type.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param VcselPeriodType VCSEL period identifier (pre-range|final).
+ * @param VCSELPulsePeriod VCSEL period value
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS Error VcselPeriodType parameter not
+ * supported.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetVcselPulsePeriod(VL53L0X_DEV Dev,
+ VL53L0X_VcselPeriod VcselPeriodType, uint8_t VCSELPulsePeriod);
+
+/**
+ * @brief Sets the (on/off) state of a requested sequence step.
+ *
+ * @par Function Description
+ * This function enables/disables a requested sequence step.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param SequenceStepId Sequence step identifier.
+ * @param SequenceStepEnabled Demanded state {0=Off,1=On}
+ * is enabled.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS Error SequenceStepId parameter not
+ * supported.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetSequenceStepEnable(VL53L0X_DEV Dev,
+ VL53L0X_SequenceStepId SequenceStepId, uint8_t SequenceStepEnabled);
+
+/**
+ * @brief Gets the (on/off) state of a requested sequence step.
+ *
+ * @par Function Description
+ * This function retrieves the state of a requested sequence step, i.e. on/off.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param SequenceStepId Sequence step identifier.
+ * @param pSequenceStepEnabled Out parameter reporting if the sequence step
+ * is enabled {0=Off,1=On}.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS Error SequenceStepId parameter not
+ * supported.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetSequenceStepEnable(VL53L0X_DEV Dev,
+ VL53L0X_SequenceStepId SequenceStepId, uint8_t *pSequenceStepEnabled);
+
+/**
+ * @brief Gets the (on/off) state of all sequence steps.
+ *
+ * @par Function Description
+ * This function retrieves the state of all sequence step in the scheduler.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param pSchedulerSequenceSteps Pointer to struct containing result.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetSequenceStepEnables(VL53L0X_DEV Dev,
+ VL53L0X_SchedulerSequenceSteps_t *pSchedulerSequenceSteps);
+
+/**
+ * @brief Sets the timeout of a requested sequence step.
+ *
+ * @par Function Description
+ * This function sets the timeout of a requested sequence step.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param SequenceStepId Sequence step identifier.
+ * @param TimeOutMilliSecs Demanded timeout
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS Error SequenceStepId parameter not
+ * supported.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetSequenceStepTimeout(VL53L0X_DEV Dev,
+ VL53L0X_SequenceStepId SequenceStepId, FixPoint1616_t TimeOutMilliSecs);
+
+/**
+ * @brief Gets the timeout of a requested sequence step.
+ *
+ * @par Function Description
+ * This function retrieves the timeout of a requested sequence step.
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param SequenceStepId Sequence step identifier.
+ * @param pTimeOutMilliSecs Timeout value.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS Error SequenceStepId parameter not
+ * supported.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetSequenceStepTimeout(VL53L0X_DEV Dev,
+ VL53L0X_SequenceStepId SequenceStepId,
+ FixPoint1616_t *pTimeOutMilliSecs);
+
+/**
+ * @brief Gets number of sequence steps managed by the API.
+ *
+ * @par Function Description
+ * This function retrieves the number of sequence steps currently managed
+ * by the API
+ *
+ * @note This function Accesses the device
+ *
+ * @param Dev Device Handle
+ * @param pNumberOfSequenceSteps Out parameter reporting the number of
+ * sequence steps.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetNumberOfSequenceSteps(VL53L0X_DEV Dev,
+ uint8_t *pNumberOfSequenceSteps);
+
+/**
+ * @brief Gets the name of a given sequence step.
+ *
+ * @par Function Description
+ * This function retrieves the name of sequence steps corresponding to
+ * SequenceStepId.
+ *
+ * @note This function doesn't Accesses the device
+ *
+ * @param SequenceStepId Sequence step identifier.
+ * @param pSequenceStepsString Pointer to Info string
+ *
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetSequenceStepsInfo(
+ VL53L0X_SequenceStepId SequenceStepId, char *pSequenceStepsString);
+
+/**
+ * Program continuous mode Inter-Measurement period in milliseconds
+ *
+ * @par Function Description
+ * When trying to set too short time return INVALID_PARAMS minimal value
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param InterMeasurementPeriodMilliSeconds Inter-Measurement Period in ms.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetInterMeasurementPeriodMilliSeconds(
+ VL53L0X_DEV Dev, uint32_t InterMeasurementPeriodMilliSeconds);
+
+/**
+ * Get continuous mode Inter-Measurement period in milliseconds
+ *
+ * @par Function Description
+ * When trying to set too short time return INVALID_PARAMS minimal value
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pInterMeasurementPeriodMilliSeconds Pointer to programmed
+ * Inter-Measurement Period in milliseconds.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetInterMeasurementPeriodMilliSeconds(
+ VL53L0X_DEV Dev, uint32_t *pInterMeasurementPeriodMilliSeconds);
+
+/**
+ * @brief Enable/Disable Cross talk compensation feature
+ *
+ * @note This function is not Implemented.
+ * Enable/Disable Cross Talk by set to zero the Cross Talk value
+ * by using @a VL53L0X_SetXTalkCompensationRateMegaCps().
+ *
+ * @param Dev Device Handle
+ * @param XTalkCompensationEnable Cross talk compensation
+ * to be set 0=disabled else = enabled
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetXTalkCompensationEnable(VL53L0X_DEV Dev,
+ uint8_t XTalkCompensationEnable);
+
+/**
+ * @brief Get Cross talk compensation rate
+ *
+ * @note This function is not Implemented.
+ * Enable/Disable Cross Talk by set to zero the Cross Talk value by
+ * using @a VL53L0X_SetXTalkCompensationRateMegaCps().
+ *
+ * @param Dev Device Handle
+ * @param pXTalkCompensationEnable Pointer to the Cross talk compensation
+ * state 0=disabled or 1 = enabled
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetXTalkCompensationEnable(VL53L0X_DEV Dev,
+ uint8_t *pXTalkCompensationEnable);
+
+/**
+ * @brief Set Cross talk compensation rate
+ *
+ * @par Function Description
+ * Set Cross talk compensation rate.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param XTalkCompensationRateMegaCps Compensation rate in
+ * Mega counts per second (16.16 fix point) see datasheet for details
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetXTalkCompensationRateMegaCps(VL53L0X_DEV Dev,
+ FixPoint1616_t XTalkCompensationRateMegaCps);
+
+/**
+ * @brief Get Cross talk compensation rate
+ *
+ * @par Function Description
+ * Get Cross talk compensation rate.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pXTalkCompensationRateMegaCps Pointer to Compensation rate
+ in Mega counts per second (16.16 fix point) see datasheet for details
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetXTalkCompensationRateMegaCps(VL53L0X_DEV Dev,
+ FixPoint1616_t *pXTalkCompensationRateMegaCps);
+
+/**
+ * @brief Set Reference Calibration Parameters
+ *
+ * @par Function Description
+ * Set Reference Calibration Parameters.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param VhvSettings Parameter for VHV
+ * @param PhaseCal Parameter for PhaseCal
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetRefCalibration(VL53L0X_DEV Dev,
+ uint8_t VhvSettings, uint8_t PhaseCal);
+
+/**
+ * @brief Get Reference Calibration Parameters
+ *
+ * @par Function Description
+ * Get Reference Calibration Parameters.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pVhvSettings Pointer to VHV parameter
+ * @param pPhaseCal Pointer to PhaseCal Parameter
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetRefCalibration(VL53L0X_DEV Dev,
+ uint8_t *pVhvSettings, uint8_t *pPhaseCal);
+
+/**
+ * @brief Get the number of the check limit managed by a given Device
+ *
+ * @par Function Description
+ * This function give the number of the check limit managed by the Device
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param pNumberOfLimitCheck Pointer to the number of check limit.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetNumberOfLimitCheck(
+ uint16_t *pNumberOfLimitCheck);
+
+/**
+ * @brief Return a description string for a given limit check number
+ *
+ * @par Function Description
+ * This function returns a description string for a given limit check number.
+ * The limit check is identified with the LimitCheckId.
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param LimitCheckId Limit Check ID
+ (0<= LimitCheckId < VL53L0X_GetNumberOfLimitCheck() ).
+ * @param pLimitCheckString Pointer to the
+ description string of the given check limit.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is
+ returned when LimitCheckId value is out of range.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetLimitCheckInfo(VL53L0X_DEV Dev,
+ uint16_t LimitCheckId, char *pLimitCheckString);
+
+/**
+ * @brief Return a the Status of the specified check limit
+ *
+ * @par Function Description
+ * This function returns the Status of the specified check limit.
+ * The value indicate if the check is fail or not.
+ * The limit check is identified with the LimitCheckId.
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param LimitCheckId Limit Check ID
+ (0<= LimitCheckId < VL53L0X_GetNumberOfLimitCheck() ).
+ * @param pLimitCheckStatus Pointer to the
+ Limit Check Status of the given check limit.
+ * LimitCheckStatus :
+ * 0 the check is not fail
+ * 1 the check if fail or not enabled
+ *
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is
+ returned when LimitCheckId value is out of range.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetLimitCheckStatus(VL53L0X_DEV Dev,
+ uint16_t LimitCheckId, uint8_t *pLimitCheckStatus);
+
+/**
+ * @brief Enable/Disable a specific limit check
+ *
+ * @par Function Description
+ * This function Enable/Disable a specific limit check.
+ * The limit check is identified with the LimitCheckId.
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param LimitCheckId Limit Check ID
+ * (0<= LimitCheckId < VL53L0X_GetNumberOfLimitCheck() ).
+ * @param LimitCheckEnable if 1 the check limit
+ * corresponding to LimitCheckId is Enabled
+ * if 0 the check limit
+ * corresponding to LimitCheckId is disabled
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is returned
+ * when LimitCheckId value is out of range.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetLimitCheckEnable(VL53L0X_DEV Dev,
+ uint16_t LimitCheckId, uint8_t LimitCheckEnable);
+
+/**
+ * @brief Get specific limit check enable state
+ *
+ * @par Function Description
+ * This function get the enable state of a specific limit check.
+ * The limit check is identified with the LimitCheckId.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param LimitCheckId Limit Check ID
+ * (0<= LimitCheckId < VL53L0X_GetNumberOfLimitCheck() ).
+ * @param pLimitCheckEnable Pointer to the check limit enable
+ * value.
+ * if 1 the check limit
+ * corresponding to LimitCheckId is Enabled
+ * if 0 the check limit
+ * corresponding to LimitCheckId is disabled
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is returned
+ * when LimitCheckId value is out of range.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetLimitCheckEnable(VL53L0X_DEV Dev,
+ uint16_t LimitCheckId, uint8_t *pLimitCheckEnable);
+
+/**
+ * @brief Set a specific limit check value
+ *
+ * @par Function Description
+ * This function set a specific limit check value.
+ * The limit check is identified with the LimitCheckId.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param LimitCheckId Limit Check ID
+ * (0<= LimitCheckId < VL53L0X_GetNumberOfLimitCheck() ).
+ * @param LimitCheckValue Limit check Value for a given
+ * LimitCheckId
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is returned when either
+ * LimitCheckId or LimitCheckValue value is out of range.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetLimitCheckValue(VL53L0X_DEV Dev,
+ uint16_t LimitCheckId, FixPoint1616_t LimitCheckValue);
+
+/**
+ * @brief Get a specific limit check value
+ *
+ * @par Function Description
+ * This function get a specific limit check value from device then it updates
+ * internal values and check enables.
+ * The limit check is identified with the LimitCheckId.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param LimitCheckId Limit Check ID
+ * (0<= LimitCheckId < VL53L0X_GetNumberOfLimitCheck() ).
+ * @param pLimitCheckValue Pointer to Limit
+ * check Value for a given LimitCheckId.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is returned
+ * when LimitCheckId value is out of range.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetLimitCheckValue(VL53L0X_DEV Dev,
+ uint16_t LimitCheckId, FixPoint1616_t *pLimitCheckValue);
+
+/**
+ * @brief Get the current value of the signal used for the limit check
+ *
+ * @par Function Description
+ * This function get a the current value of the signal used for the limit check.
+ * To obtain the latest value you should run a ranging before.
+ * The value reported is linked to the limit check identified with the
+ * LimitCheckId.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param LimitCheckId Limit Check ID
+ * (0<= LimitCheckId < VL53L0X_GetNumberOfLimitCheck() ).
+ * @param pLimitCheckCurrent Pointer to current Value for a
+ * given LimitCheckId.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is returned when
+ * LimitCheckId value is out of range.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetLimitCheckCurrent(VL53L0X_DEV Dev,
+ uint16_t LimitCheckId, FixPoint1616_t *pLimitCheckCurrent);
+
+/**
+ * @brief Enable (or disable) Wrap around Check
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param WrapAroundCheckEnable Wrap around Check to be set
+ * 0=disabled, other = enabled
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetWrapAroundCheckEnable(VL53L0X_DEV Dev,
+ uint8_t WrapAroundCheckEnable);
+
+/**
+ * @brief Get setup of Wrap around Check
+ *
+ * @par Function Description
+ * This function get the wrapAround check enable parameters
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pWrapAroundCheckEnable Pointer to the Wrap around Check state
+ * 0=disabled or 1 = enabled
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetWrapAroundCheckEnable(VL53L0X_DEV Dev,
+ uint8_t *pWrapAroundCheckEnable);
+
+/**
+ * @brief Set Dmax Calibration Parameters for a given device
+ * When one of the parameter is zero, this function will get parameter
+ * from NVM.
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param RangeMilliMeter Calibration Distance
+ * @param SignalRateRtnMegaCps Signal rate return read at CalDistance
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetDmaxCalParameters(VL53L0X_DEV Dev,
+ uint16_t RangeMilliMeter, FixPoint1616_t SignalRateRtnMegaCps);
+
+/**
+ * @brief Get Dmax Calibration Parameters for a given device
+ *
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pRangeMilliMeter Pointer to Calibration Distance
+ * @param pSignalRateRtnMegaCps Pointer to Signal rate return
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetDmaxCalParameters(VL53L0X_DEV Dev,
+ uint16_t *pRangeMilliMeter, FixPoint1616_t *pSignalRateRtnMegaCps);
+
+/** @} VL53L0X_parameters_group */
+
+/** @defgroup VL53L0X_measurement_group VL53L0X Measurement Functions
+ * @brief Functions used for the measurements
+ * @{
+ */
+
+/**
+ * @brief Single shot measurement.
+ *
+ * @par Function Description
+ * Perform simple measurement sequence (Start measure, Wait measure to end,
+ * and returns when measurement is done).
+ * Once function returns, user can get valid data by calling
+ * VL53L0X_GetRangingMeasurement or VL53L0X_GetHistogramMeasurement
+ * depending on defined measurement mode
+ * User should Clear the interrupt in case this are enabled by using the
+ * function VL53L0X_ClearInterruptMask().
+ *
+ * @warning This function is a blocking function
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_PerformSingleMeasurement(VL53L0X_DEV Dev);
+
+/**
+ * @brief Perform Reference Calibration
+ *
+ * @details Perform a reference calibration of the Device.
+ * This function should be run from time to time before doing
+ * a ranging measurement.
+ * This function will launch a special ranging measurement, so
+ * if interrupt are enable an interrupt will be done.
+ * This function will clear the interrupt generated automatically.
+ *
+ * @warning This function is a blocking function
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pVhvSettings Pointer to vhv settings parameter.
+ * @param pPhaseCal Pointer to PhaseCal parameter.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_PerformRefCalibration(VL53L0X_DEV Dev,
+ uint8_t *pVhvSettings, uint8_t *pPhaseCal);
+
+/**
+ * @brief Perform XTalk Measurement
+ *
+ * @details Measures the current cross talk from glass in front
+ * of the sensor.
+ * This functions performs a histogram measurement and uses the results
+ * to measure the crosstalk. For the function to be successful, there
+ * must be no target in front of the sensor.
+ *
+ * @warning This function is a blocking function
+ *
+ * @warning This function is not supported when the final range
+ * vcsel clock period is set below 10 PCLKS.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param TimeoutMs Histogram measurement duration.
+ * @param pXtalkPerSpad Output parameter containing the crosstalk
+ * measurement result, in MCPS/Spad. Format fixpoint 16:16.
+ * @param pAmbientTooHigh Output parameter which indicate that
+ * pXtalkPerSpad is not good if the Ambient is too high.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS vcsel clock period not supported
+ * for this operation. Must not be less than 10PCLKS.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_PerformXTalkMeasurement(VL53L0X_DEV Dev,
+ uint32_t TimeoutMs, FixPoint1616_t *pXtalkPerSpad,
+ uint8_t *pAmbientTooHigh);
+
+/**
+ * @brief Perform XTalk Calibration
+ *
+ * @details Perform a XTalk calibration of the Device.
+ * This function will launch a ranging measurement, if interrupts
+ * are enabled an interrupt will be done.
+ * This function will clear the interrupt generated automatically.
+ * This function will program a new value for the XTalk compensation
+ * and it will enable the cross talk before exit.
+ * This function will disable the VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD.
+ *
+ * @warning This function is a blocking function
+ *
+ * @note This function Access to the device
+ *
+ * @note This function change the device mode to
+ * VL53L0X_DEVICEMODE_SINGLE_RANGING
+ *
+ * @param Dev Device Handle
+ * @param XTalkCalDistance XTalkCalDistance value used for the XTalk
+ * computation.
+ * @param pXTalkCompensationRateMegaCps Pointer to new
+ * XTalkCompensation value.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_PerformXTalkCalibration(VL53L0X_DEV Dev,
+ FixPoint1616_t XTalkCalDistance,
+ FixPoint1616_t *pXTalkCompensationRateMegaCps);
+
+/**
+ * @brief Perform Offset Calibration
+ *
+ * @details Perform a Offset calibration of the Device.
+ * This function will launch a ranging measurement, if interrupts are
+ * enabled an interrupt will be done.
+ * This function will clear the interrupt generated automatically.
+ * This function will program a new value for the Offset calibration value
+ * This function will disable the VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD.
+ *
+ * @warning This function is a blocking function
+ *
+ * @note This function Access to the device
+ *
+ * @note This function does not change the device mode.
+ *
+ * @param Dev Device Handle
+ * @param CalDistanceMilliMeter Calibration distance value used for the
+ * offset compensation.
+ * @param pOffsetMicroMeter Pointer to new Offset value computed by the
+ * function.
+ *
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_PerformOffsetCalibration(VL53L0X_DEV Dev,
+ FixPoint1616_t CalDistanceMilliMeter, int32_t *pOffsetMicroMeter);
+
+/**
+ * @brief Start device measurement
+ *
+ * @details Started measurement will depend on device parameters set through
+ * @a VL53L0X_SetParameters()
+ * This is a non-blocking function.
+ * This function will change the VL53L0X_State from VL53L0X_STATE_IDLE to
+ * VL53L0X_STATE_RUNNING.
+ *
+ * @note This function Access to the device
+ *
+
+ * @param Dev Device Handle
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_MODE_NOT_SUPPORTED This error occurs when
+ * DeviceMode programmed with @a VL53L0X_SetDeviceMode is not in the supported
+ * list:
+ * Supported mode are:
+ * VL53L0X_DEVICEMODE_SINGLE_RANGING,
+ * VL53L0X_DEVICEMODE_CONTINUOUS_RANGING,
+ * VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING
+ * @return VL53L0X_ERROR_TIME_OUT Time out on start measurement
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_StartMeasurement(VL53L0X_DEV Dev);
+
+/**
+ * @brief Stop device measurement
+ *
+ * @details Will set the device in standby mode at end of current measurement\n
+ * Not necessary in single mode as device shall return automatically
+ * in standby mode at end of measurement.
+ * This function will change the VL53L0X_State from VL53L0X_STATE_RUNNING
+ * to VL53L0X_STATE_IDLE.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_StopMeasurement(VL53L0X_DEV Dev);
+
+/**
+ * @brief Return Measurement Data Ready
+ *
+ * @par Function Description
+ * This function indicate that a measurement data is ready.
+ * This function check if interrupt mode is used then check is done accordingly.
+ * If perform function clear the interrupt, this function will not work,
+ * like in case of @a VL53L0X_PerformSingleRangingMeasurement().
+ * The previous function is blocking function, VL53L0X_GetMeasurementDataReady
+ * is used for non-blocking capture.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pMeasurementDataReady Pointer to Measurement Data Ready.
+ * 0=data not ready, 1 = data ready
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetMeasurementDataReady(VL53L0X_DEV Dev,
+ uint8_t *pMeasurementDataReady);
+
+/**
+ * @brief Wait for device ready for a new measurement command.
+ * Blocking function.
+ *
+ * @note This function is not Implemented
+ *
+ * @param Dev Device Handle
+ * @param MaxLoop Max Number of polling loop (timeout).
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_WaitDeviceReadyForNewMeasurement(VL53L0X_DEV Dev,
+ uint32_t MaxLoop);
+
+/**
+ * @brief Retrieve the Reference Signal after a measurements
+ *
+ * @par Function Description
+ * Get Reference Signal from last successful Ranging measurement
+ * This function return a valid value after that you call the
+ * @a VL53L0X_GetRangingMeasurementData().
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pMeasurementRefSignal Pointer to the Ref Signal to fill up.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetMeasurementRefSignal(VL53L0X_DEV Dev,
+ FixPoint1616_t *pMeasurementRefSignal);
+
+/**
+ * @brief Retrieve the measurements from device for a given setup
+ *
+ * @par Function Description
+ * Get data from last successful Ranging measurement
+ * @warning USER should take care about @a VL53L0X_GetNumberOfROIZones()
+ * before get data.
+ * PAL will fill a NumberOfROIZones times the corresponding data
+ * structure used in the measurement function.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pRangingMeasurementData Pointer to the data structure to fill up.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetRangingMeasurementData(VL53L0X_DEV Dev,
+ VL53L0X_RangingMeasurementData_t *pRangingMeasurementData);
+
+/**
+ * @brief Retrieve the measurements from device for a given setup
+ *
+ * @par Function Description
+ * Get data from last successful Histogram measurement
+ * @warning USER should take care about @a VL53L0X_GetNumberOfROIZones()
+ * before get data.
+ * PAL will fill a NumberOfROIZones times the corresponding data structure
+ * used in the measurement function.
+ *
+ * @note This function is not Implemented
+ *
+ * @param Dev Device Handle
+ * @param pHistogramMeasurementData Pointer to the histogram data structure.
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetHistogramMeasurementData(VL53L0X_DEV Dev,
+ VL53L0X_HistogramMeasurementData_t *pHistogramMeasurementData);
+
+/**
+ * @brief Performs a single ranging measurement and retrieve the ranging
+ * measurement data
+ *
+ * @par Function Description
+ * This function will change the device mode to VL53L0X_DEVICEMODE_SINGLE_RANGING
+ * with @a VL53L0X_SetDeviceMode(),
+ * It performs measurement with @a VL53L0X_PerformSingleMeasurement()
+ * It get data from last successful Ranging measurement with
+ * @a VL53L0X_GetRangingMeasurementData.
+ * Finally it clear the interrupt with @a VL53L0X_ClearInterruptMask().
+ *
+ * @note This function Access to the device
+ *
+ * @note This function change the device mode to
+ * VL53L0X_DEVICEMODE_SINGLE_RANGING
+ *
+ * @param Dev Device Handle
+ * @param pRangingMeasurementData Pointer to the data structure to fill up.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_PerformSingleRangingMeasurement(VL53L0X_DEV Dev,
+ VL53L0X_RangingMeasurementData_t *pRangingMeasurementData);
+
+/**
+ * @brief Performs a single histogram measurement and retrieve the histogram
+ * measurement data
+ * Is equivalent to VL53L0X_PerformSingleMeasurement +
+ * VL53L0X_GetHistogramMeasurementData
+ *
+ * @par Function Description
+ * Get data from last successful Ranging measurement.
+ * This function will clear the interrupt in case of these are enabled.
+ *
+ * @note This function is not Implemented
+ *
+ * @param Dev Device Handle
+ * @param pHistogramMeasurementData Pointer to the data structure to fill up.
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_PerformSingleHistogramMeasurement(VL53L0X_DEV Dev,
+ VL53L0X_HistogramMeasurementData_t *pHistogramMeasurementData);
+
+/**
+ * @brief Set the number of ROI Zones to be used for a specific Device
+ *
+ * @par Function Description
+ * Set the number of ROI Zones to be used for a specific Device.
+ * The programmed value should be less than the max number of ROI Zones given
+ * with @a VL53L0X_GetMaxNumberOfROIZones().
+ * This version of API manage only one zone.
+ *
+ * @param Dev Device Handle
+ * @param NumberOfROIZones Number of ROI Zones to be used for a
+ * specific Device.
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INVALID_PARAMS This error is returned if
+ * NumberOfROIZones != 1
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetNumberOfROIZones(VL53L0X_DEV Dev,
+ uint8_t NumberOfROIZones);
+
+/**
+ * @brief Get the number of ROI Zones managed by the Device
+ *
+ * @par Function Description
+ * Get number of ROI Zones managed by the Device
+ * USER should take care about @a VL53L0X_GetNumberOfROIZones()
+ * before get data after a perform measurement.
+ * PAL will fill a NumberOfROIZones times the corresponding data
+ * structure used in the measurement function.
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pNumberOfROIZones Pointer to the Number of ROI Zones value.
+ * @return VL53L0X_ERROR_NONE Success
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetNumberOfROIZones(VL53L0X_DEV Dev,
+ uint8_t *pNumberOfROIZones);
+
+/**
+ * @brief Get the Maximum number of ROI Zones managed by the Device
+ *
+ * @par Function Description
+ * Get Maximum number of ROI Zones managed by the Device.
+ *
+ * @note This function doesn't Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pMaxNumberOfROIZones Pointer to the Maximum Number
+ * of ROI Zones value.
+ * @return VL53L0X_ERROR_NONE Success
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetMaxNumberOfROIZones(VL53L0X_DEV Dev,
+ uint8_t *pMaxNumberOfROIZones);
+
+/** @} VL53L0X_measurement_group */
+
+/** @defgroup VL53L0X_interrupt_group VL53L0X Interrupt Functions
+ * @brief Functions used for interrupt managements
+ * @{
+ */
+
+/**
+ * @brief Set the configuration of GPIO pin for a given device
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param Pin ID of the GPIO Pin
+ * @param Functionality Select Pin functionality.
+ * Refer to ::VL53L0X_GpioFunctionality
+ * @param DeviceMode Device Mode associated to the Gpio.
+ * @param Polarity Set interrupt polarity. Active high
+ * or active low see ::VL53L0X_InterruptPolarity
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_GPIO_NOT_EXISTING Only Pin=0 is accepted.
+ * @return VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED This error occurs
+ * when Functionality programmed is not in the supported list:
+ * Supported value are:
+ * VL53L0X_GPIOFUNCTIONALITY_OFF,
+ * VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_LOW,
+ * VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_HIGH,
+ VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_OUT,
+ * VL53L0X_GPIOFUNCTIONALITY_NEW_MEASURE_READY
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetGpioConfig(VL53L0X_DEV Dev, uint8_t Pin,
+ VL53L0X_DeviceModes DeviceMode, VL53L0X_GpioFunctionality Functionality,
+ VL53L0X_InterruptPolarity Polarity);
+
+/**
+ * @brief Get current configuration for GPIO pin for a given device
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param Pin ID of the GPIO Pin
+ * @param pDeviceMode Pointer to Device Mode associated to the Gpio.
+ * @param pFunctionality Pointer to Pin functionality.
+ * Refer to ::VL53L0X_GpioFunctionality
+ * @param pPolarity Pointer to interrupt polarity.
+ * Active high or active low see ::VL53L0X_InterruptPolarity
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_GPIO_NOT_EXISTING Only Pin=0 is accepted.
+ * @return VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED This error occurs
+ * when Functionality programmed is not in the supported list:
+ * Supported value are:
+ * VL53L0X_GPIOFUNCTIONALITY_OFF,
+ * VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_LOW,
+ * VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_HIGH,
+ * VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_OUT,
+ * VL53L0X_GPIOFUNCTIONALITY_NEW_MEASURE_READY
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetGpioConfig(VL53L0X_DEV Dev, uint8_t Pin,
+ VL53L0X_DeviceModes *pDeviceMode,
+ VL53L0X_GpioFunctionality *pFunctionality,
+ VL53L0X_InterruptPolarity *pPolarity);
+
+/**
+ * @brief Set low and high Interrupt thresholds for a given mode
+ * (ranging, ALS, ...) for a given device
+ *
+ * @par Function Description
+ * Set low and high Interrupt thresholds for a given mode (ranging, ALS, ...)
+ * for a given device
+ *
+ * @note This function Access to the device
+ *
+ * @note DeviceMode is ignored for the current device
+ *
+ * @param Dev Device Handle
+ * @param DeviceMode Device Mode for which change thresholds
+ * @param ThresholdLow Low threshold (mm, lux ..., depending on the mode)
+ * @param ThresholdHigh High threshold (mm, lux ..., depending on the mode)
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetInterruptThresholds(VL53L0X_DEV Dev,
+ VL53L0X_DeviceModes DeviceMode, FixPoint1616_t ThresholdLow,
+ FixPoint1616_t ThresholdHigh);
+
+/**
+ * @brief Get high and low Interrupt thresholds for a given mode
+ * (ranging, ALS, ...) for a given device
+ *
+ * @par Function Description
+ * Get high and low Interrupt thresholds for a given mode (ranging, ALS, ...)
+ * for a given device
+ *
+ * @note This function Access to the device
+ *
+ * @note DeviceMode is ignored for the current device
+ *
+ * @param Dev Device Handle
+ * @param DeviceMode Device Mode from which read thresholds
+ * @param pThresholdLow Low threshold (mm, lux ..., depending on the mode)
+ * @param pThresholdHigh High threshold (mm, lux ..., depending on the mode)
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetInterruptThresholds(VL53L0X_DEV Dev,
+ VL53L0X_DeviceModes DeviceMode, FixPoint1616_t *pThresholdLow,
+ FixPoint1616_t *pThresholdHigh);
+
+/**
+ * @brief Return device stop completion status
+ *
+ * @par Function Description
+ * Returns stop completiob status.
+ * User shall call this function after a stop command
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pStopStatus Pointer to status variable to update
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetStopCompletedStatus(VL53L0X_DEV Dev,
+ uint32_t *pStopStatus);
+
+
+/**
+ * @brief Clear given system interrupt condition
+ *
+ * @par Function Description
+ * Clear given interrupt(s).
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param InterruptMask Mask of interrupts to clear
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_INTERRUPT_NOT_CLEARED Cannot clear interrupts
+ *
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_ClearInterruptMask(VL53L0X_DEV Dev,
+ uint32_t InterruptMask);
+
+/**
+ * @brief Return device interrupt status
+ *
+ * @par Function Description
+ * Returns currently raised interrupts by the device.
+ * User shall be able to activate/deactivate interrupts through
+ * @a VL53L0X_SetGpioConfig()
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pInterruptMaskStatus Pointer to status variable to update
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetInterruptMaskStatus(VL53L0X_DEV Dev,
+ uint32_t *pInterruptMaskStatus);
+
+/**
+ * @brief Configure ranging interrupt reported to system
+ *
+ * @note This function is not Implemented
+ *
+ * @param Dev Device Handle
+ * @param InterruptMask Mask of interrupt to Enable/disable
+ * (0:interrupt disabled or 1: interrupt enabled)
+ * @return VL53L0X_ERROR_NOT_IMPLEMENTED Not implemented
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_EnableInterruptMask(VL53L0X_DEV Dev,
+ uint32_t InterruptMask);
+
+/** @} VL53L0X_interrupt_group */
+
+/** @defgroup VL53L0X_SPADfunctions_group VL53L0X SPAD Functions
+ * @brief Functions used for SPAD managements
+ * @{
+ */
+
+/**
+ * @brief Set the SPAD Ambient Damper Threshold value
+ *
+ * @par Function Description
+ * This function set the SPAD Ambient Damper Threshold value
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param SpadAmbientDamperThreshold SPAD Ambient Damper Threshold value
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetSpadAmbientDamperThreshold(VL53L0X_DEV Dev,
+ uint16_t SpadAmbientDamperThreshold);
+
+/**
+ * @brief Get the current SPAD Ambient Damper Threshold value
+ *
+ * @par Function Description
+ * This function get the SPAD Ambient Damper Threshold value
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pSpadAmbientDamperThreshold Pointer to programmed
+ * SPAD Ambient Damper Threshold value
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetSpadAmbientDamperThreshold(VL53L0X_DEV Dev,
+ uint16_t *pSpadAmbientDamperThreshold);
+
+/**
+ * @brief Set the SPAD Ambient Damper Factor value
+ *
+ * @par Function Description
+ * This function set the SPAD Ambient Damper Factor value
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param SpadAmbientDamperFactor SPAD Ambient Damper Factor value
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetSpadAmbientDamperFactor(VL53L0X_DEV Dev,
+ uint16_t SpadAmbientDamperFactor);
+
+/**
+ * @brief Get the current SPAD Ambient Damper Factor value
+ *
+ * @par Function Description
+ * This function get the SPAD Ambient Damper Factor value
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param pSpadAmbientDamperFactor Pointer to programmed SPAD Ambient
+ * Damper Factor value
+ * @return VL53L0X_ERROR_NONE Success
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetSpadAmbientDamperFactor(VL53L0X_DEV Dev,
+ uint16_t *pSpadAmbientDamperFactor);
+
+/**
+ * @brief Performs Reference Spad Management
+ *
+ * @par Function Description
+ * The reference SPAD initialization procedure determines the minimum amount
+ * of reference spads to be enables to achieve a target reference signal rate
+ * and should be performed once during initialization.
+ *
+ * @note This function Access to the device
+ *
+ * @note This function change the device mode to
+ * VL53L0X_DEVICEMODE_SINGLE_RANGING
+ *
+ * @param Dev Device Handle
+ * @param refSpadCount Reports ref Spad Count
+ * @param isApertureSpads Reports if spads are of type
+ * aperture or non-aperture.
+ * 1:=aperture, 0:=Non-Aperture
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_REF_SPAD_INIT Error in the Ref Spad procedure.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_PerformRefSpadManagement(VL53L0X_DEV Dev,
+ uint32_t *refSpadCount, uint8_t *isApertureSpads);
+
+/**
+ * @brief Applies Reference SPAD configuration
+ *
+ * @par Function Description
+ * This function applies a given number of reference spads, identified as
+ * either Aperture or Non-Aperture.
+ * The requested spad count and type are stored within the device specific
+ * parameters data for access by the host.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param refSpadCount Number of ref spads.
+ * @param isApertureSpads Defines if spads are of type
+ * aperture or non-aperture.
+ * 1:=aperture, 0:=Non-Aperture
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_REF_SPAD_INIT Error in the in the reference
+ * spad configuration.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_SetReferenceSpads(VL53L0X_DEV Dev,
+ uint32_t refSpadCount, uint8_t isApertureSpads);
+
+/**
+ * @brief Retrieves SPAD configuration
+ *
+ * @par Function Description
+ * This function retrieves the current number of applied reference spads
+ * and also their type : Aperture or Non-Aperture.
+ *
+ * @note This function Access to the device
+ *
+ * @param Dev Device Handle
+ * @param refSpadCount Number ref Spad Count
+ * @param isApertureSpads Reports if spads are of type
+ * aperture or non-aperture.
+ * 1:=aperture, 0:=Non-Aperture
+ * @return VL53L0X_ERROR_NONE Success
+ * @return VL53L0X_ERROR_REF_SPAD_INIT Error in the in the reference
+ * spad configuration.
+ * @return "Other error code" See ::VL53L0X_Error
+ */
+VL53L0X_API VL53L0X_Error VL53L0X_GetReferenceSpads(VL53L0X_DEV Dev,
+ uint32_t *refSpadCount, uint8_t *isApertureSpads);
+
+/** @} VL53L0X_SPADfunctions_group */
+
+/** @} VL53L0X_cut11_group */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _VL53L0X_API_H_ */