Diff: USBDevice/USBHID/USBHID.h

Revision:

53:02408ec83097

Parent:

52:63f0a9b45f0c

Child:

55:e47a4b7ab348

diff -r 63f0a9b45f0c -r 02408ec83097 USBDevice/USBHID/USBHID.h
--- a/USBDevice/USBHID/USBHID.h	Thu Feb 11 18:12:52 2016 +0000
+++ b/USBDevice/USBHID/USBHID.h	Thu Feb 11 18:31:05 2016 +0000
@@ -115,7 +115,7 @@
     * @returns pointer to the report descriptor
     */
     virtual uint8_t * reportDesc();
-    virtual uint8_t * reportDescN(int idx) { return reportDesc(); /*$$$idx == 0 ? reportDesc() : 0;*/ }
+    virtual uint8_t * reportDescN(int idx) { return idx == 0 ? reportDesc() : 0; }
 
     /*
     * Get the length of the report descriptor
@@ -149,39 +149,7 @@
     * @returns pointer to the configuration descriptor
     */
     virtual uint8_t * configurationDesc();
-    
-    /*
-    * Set the idle time on the given interface.  The idle time is the time between
-    * INTERRUPT IN reports sent from the device to the host in the absence of any
-    * updates in values.  E.g., for a keyboard, this is the time between reports
-    * when there's no new key up/down activity to report.  An infinite idle time
-    * means that reports are sent only when new activity occurs.
-    *
-    * @param ifc Interface index (this specifies which interface is affected, in
-    * cases where the device has multiple interfaces)
-    *
-    * @param reportID Report ID (specifies which report type is affected, in cases
-    * where the device has multiple report types)
-    *
-    * @param t Idle time in 4ms units, with the special case that 0 means infinity.
-    * The maximum value is 255 units (1.02s).
-    */
-    virtual void setIdleTime(int ifc, int reportId, int t) { }
-    
-    /*
-    * Get the idle time on the given interface.  Returns the idle time information
-    * previously set with setIdleTime().
-    *
-    * @param ifc Interface index (specifies which interface is being queried, in
-    * cases where the device has multiple interfaces)
-    *
-    * @param reportID Report ID (specifies which report type is being queried, in
-    * cases where the device has multiple report types)
-    *
-    * @return The idle time currently set on the interface, in 4ms units.  0 means
-    * infinity (so reports will only be sent when there's new data)
-    */
-    virtual uint8_t getIdleTime(int ifc, int reportId) { return 0; }
+
 
     /*
     * HID Report received by SET_REPORT request. Warning: Called in ISR context
@@ -215,7 +183,6 @@
     HID_REPORT outputReport;
     uint8_t output_length;
     uint8_t input_length;
-    uint8_t idleData;
 };
 
 #endif