Adrian Mitevski
A multifunctional and modular Firmware for Multitech's mDot based on ARM mBed provides a widerange of functionality for several Sensors such as MAX44009, BME280, MPU9250, SI1143 and uBlox. It allows you to quickly build a Sensornode that measures specific data with its sensors and sends it via LoRaWAN.
Dependencies: mDot_LoRa_Sensornode_Flowmeter_impl mbed-rtos mbed
LoRa-Sensornode Firmware for Multitech mDot
A multifunctional and modular Firmware for Multitech's mDot which provides a widerange of functionality for several Sensors. It allows you to quickly build a Sensornode that measures specific data with its sensors and sends it via LoRaWAN.
Supported Sensors
- MAX44009 (Lux Measurment) http://www.ebay.ie/itm/MAX44009-Ambient-Light-Sensor-Module-for-Arduino-with-4P-Pin-Header-/381676089124?hash=item58ddaaef24:g:-ecAAOSwzJ5XZm5E
- BME280 (Temperature, Pressure and Humdity Measurment) At the moment there are some known problem using this. https://www.adafruit.com/product/2652 https://www.amazon.com/Diymall-Pressure-Temperature-Sensor-Arduino/dp/B0118XCKTG
- MPU9250 (Acceleration, Gyroscope and Magnetometer) http://www.watterott.com/de/9-DOF-IMU-Module-With-MPU-9250
- Si1143 (Proximity up to 50cm) https://moderndevice.com/product/si1143-proximity-sensors/
- uBlox M8Q (GPS Position) http://www.dx.com/de/p/gygpsv3-m8n-u-blox-neo-m8n-001-flight-controller-gps-module-blue-394557#.V4lFW-uLRhE
Idea
The Firmware has some predefined Application Modes running different Tasks(Measurements). Each mode can be used in a different Scenario. Application_Modes define which sensors are used, how often they aquire data and how often the data has to be sent via LoRa. Lets say you just want to measure the Light then you choose an Application_Mode (or define one) that only runs TaskLight for light measurement. As a standard all measurements are taken every second and sent via LoRa but you can change that interval depending on your usage Scenario
app/MAX44009Config.cpp@10:4051c38bf73f, 2018-11-02 (annotated)
- Committer:
- mitea1
- Date:
- Fri Nov 02 17:01:02 2018 +0000
- Revision:
- 10:4051c38bf73f
- Parent:
- 0:f2815503561f
wtf
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| mitea1 | 0:f2815503561f | 1 | /* |
| mitea1 | 0:f2815503561f | 2 | * MAX44009Config.cpp |
| mitea1 | 0:f2815503561f | 3 | * |
| mitea1 | 0:f2815503561f | 4 | * Created on: 25.05.2016 |
| mitea1 | 0:f2815503561f | 5 | * Author: Adrian |
| mitea1 | 0:f2815503561f | 6 | */ |
| mitea1 | 0:f2815503561f | 7 | |
| mitea1 | 0:f2815503561f | 8 | #include "MAX44009Config.h" |
| mitea1 | 0:f2815503561f | 9 | |
| mitea1 | 0:f2815503561f | 10 | MAX44009Config::MAX44009Config() { |
| mitea1 | 0:f2815503561f | 11 | // TODO Auto-generated constructor stub |
| mitea1 | 0:f2815503561f | 12 | |
| mitea1 | 0:f2815503561f | 13 | } |
| mitea1 | 0:f2815503561f | 14 | |
| mitea1 | 0:f2815503561f | 15 | MAX44009Config::MAX44009Config(MAX44009_MODE desiredMode) { |
| mitea1 | 0:f2815503561f | 16 | build(desiredMode); |
| mitea1 | 0:f2815503561f | 17 | } |
| mitea1 | 0:f2815503561f | 18 | |
| mitea1 | 0:f2815503561f | 19 | MAX44009Config::~MAX44009Config() { |
| mitea1 | 0:f2815503561f | 20 | // TODO Auto-generated destructor stub |
| mitea1 | 0:f2815503561f | 21 | } |
| mitea1 | 0:f2815503561f | 22 | |
| mitea1 | 0:f2815503561f | 23 | void MAX44009Config::build(MAX44009_MODE desiredMode){ |
| mitea1 | 0:f2815503561f | 24 | switch(desiredMode){ |
| mitea1 | 0:f2815503561f | 25 | case MAX44009_MODE_0: |
| mitea1 | 0:f2815503561f | 26 | setIntegrationTime(MAX_44009_INTEGRATION_TIME_800_MS); |
| mitea1 | 0:f2815503561f | 27 | setContinousMode(MAX_44009_CONTINOUS_MODE_OFF); |
| mitea1 | 0:f2815503561f | 28 | setManualConfig(MAX_44009_MANUAL_CONFIG_OFF); |
| mitea1 | 0:f2815503561f | 29 | case MAX44009_MODE_1: |
| mitea1 | 0:f2815503561f | 30 | setIntegrationTime(MAX_44009_INTEGRATION_TIME_400_MS); |
| mitea1 | 0:f2815503561f | 31 | setContinousMode(MAX_44009_CONTINOUS_MODE_ON); |
| mitea1 | 0:f2815503561f | 32 | setManualConfig(MAX_44009_MANUAL_CONFIG_OFF); |
| mitea1 | 0:f2815503561f | 33 | break; |
| mitea1 | 0:f2815503561f | 34 | case MAX44009_MODE_2: |
| mitea1 | 0:f2815503561f | 35 | setIntegrationTime(MAX_44009_INTEGRATION_TIME_200_MS); |
| mitea1 | 0:f2815503561f | 36 | setContinousMode(MAX_44009_CONTINOUS_MODE_ON); |
| mitea1 | 0:f2815503561f | 37 | setManualConfig(MAX_44009_MANUAL_CONFIG_OFF); |
| mitea1 | 0:f2815503561f | 38 | break; |
| mitea1 | 0:f2815503561f | 39 | case MAX44009_MODE_3: |
| mitea1 | 0:f2815503561f | 40 | setIntegrationTime(MAX_44009_INTEGRATION_TIME_100_MS); |
| mitea1 | 0:f2815503561f | 41 | setContinousMode(MAX_44009_CONTINOUS_MODE_ON); |
| mitea1 | 0:f2815503561f | 42 | setManualConfig(MAX_44009_MANUAL_CONFIG_OFF); |
| mitea1 | 0:f2815503561f | 43 | break; |
| mitea1 | 0:f2815503561f | 44 | case MAX44009_MODE_4: |
| mitea1 | 0:f2815503561f | 45 | setIntegrationTime(MAX_44009_INTEGRATION_TIME_50_MS); |
| mitea1 | 0:f2815503561f | 46 | setContinousMode(MAX_44009_CONTINOUS_MODE_ON); |
| mitea1 | 0:f2815503561f | 47 | setManualConfig(MAX_44009_MANUAL_CONFIG_ON); |
| mitea1 | 0:f2815503561f | 48 | setInterruptEnable(MAX_44009_IRQ_ENABLED); |
| mitea1 | 0:f2815503561f | 49 | setInterruptUpperThreshold(MAX_44009_THRESHOLD_4096_LUX); |
| mitea1 | 0:f2815503561f | 50 | setInterruptLowerThreshold(0); |
| mitea1 | 0:f2815503561f | 51 | break; |
| mitea1 | 0:f2815503561f | 52 | case MAX44009_MODE_5: |
| mitea1 | 0:f2815503561f | 53 | setIntegrationTime(MAX_44009_INTEGRATION_TIME_25_MS); |
| mitea1 | 0:f2815503561f | 54 | setContinousMode(MAX_44009_CONTINOUS_MODE_ON); |
| mitea1 | 0:f2815503561f | 55 | setManualConfig(MAX_44009_MANUAL_CONFIG_ON); |
| mitea1 | 0:f2815503561f | 56 | break; |
| mitea1 | 0:f2815503561f | 57 | case MAX44009_MODE_6: |
| mitea1 | 0:f2815503561f | 58 | setIntegrationTime(MAX_44009_INTEGRATION_TIME_12_5_MS); |
| mitea1 | 0:f2815503561f | 59 | setContinousMode(MAX_44009_CONTINOUS_MODE_ON); |
| mitea1 | 0:f2815503561f | 60 | setManualConfig(MAX_44009_MANUAL_CONFIG_ON); |
| mitea1 | 0:f2815503561f | 61 | break; |
| mitea1 | 0:f2815503561f | 62 | default: |
| mitea1 | 0:f2815503561f | 63 | setIntegrationTime(MAX_44009_INTEGRATION_TIME_800_MS); |
| mitea1 | 0:f2815503561f | 64 | setContinousMode(MAX_44009_CONTINOUS_MODE_ON); |
| mitea1 | 0:f2815503561f | 65 | } |
| mitea1 | 0:f2815503561f | 66 | } |
| mitea1 | 0:f2815503561f | 67 | |
| mitea1 | 0:f2815503561f | 68 | uint8_t MAX44009Config::getIntegrationTime(){ |
| mitea1 | 0:f2815503561f | 69 | return this->integrationTime; |
| mitea1 | 0:f2815503561f | 70 | } |
| mitea1 | 0:f2815503561f | 71 | |
| mitea1 | 0:f2815503561f | 72 | uint8_t MAX44009Config::getContinousMode(){ |
| mitea1 | 0:f2815503561f | 73 | return this->continousMode; |
| mitea1 | 0:f2815503561f | 74 | } |
| mitea1 | 0:f2815503561f | 75 | |
| mitea1 | 0:f2815503561f | 76 | uint8_t MAX44009Config::getManualConfig(){ |
| mitea1 | 0:f2815503561f | 77 | return this->manualConfig; |
| mitea1 | 0:f2815503561f | 78 | } |
| mitea1 | 0:f2815503561f | 79 | |
| mitea1 | 0:f2815503561f | 80 | uint8_t MAX44009Config::getInterruptEnable(){ |
| mitea1 | 0:f2815503561f | 81 | return this->interruptEnable; |
| mitea1 | 0:f2815503561f | 82 | } |
| mitea1 | 0:f2815503561f | 83 | |
| mitea1 | 0:f2815503561f | 84 | uint8_t MAX44009Config::getUpperThreshold(){ |
| mitea1 | 0:f2815503561f | 85 | return this->upperThreshold; |
| mitea1 | 0:f2815503561f | 86 | } |
| mitea1 | 0:f2815503561f | 87 | |
| mitea1 | 0:f2815503561f | 88 | uint8_t MAX44009Config::getLowerThreshold(){ |
| mitea1 | 0:f2815503561f | 89 | return this->lowerThreshold; |
| mitea1 | 0:f2815503561f | 90 | } |
| mitea1 | 0:f2815503561f | 91 | |
| mitea1 | 0:f2815503561f | 92 | void MAX44009Config::setIntegrationTime(uint8_t integrationTime){ |
| mitea1 | 0:f2815503561f | 93 | this->integrationTime = integrationTime; |
| mitea1 | 0:f2815503561f | 94 | } |
| mitea1 | 0:f2815503561f | 95 | |
| mitea1 | 0:f2815503561f | 96 | void MAX44009Config::setContinousMode(uint8_t continousMode){ |
| mitea1 | 0:f2815503561f | 97 | this->continousMode = continousMode; |
| mitea1 | 0:f2815503561f | 98 | } |
| mitea1 | 0:f2815503561f | 99 | |
| mitea1 | 0:f2815503561f | 100 | void MAX44009Config::setManualConfig(uint8_t manualConfig){ |
| mitea1 | 0:f2815503561f | 101 | this->manualConfig = manualConfig; |
| mitea1 | 0:f2815503561f | 102 | } |
| mitea1 | 0:f2815503561f | 103 | |
| mitea1 | 0:f2815503561f | 104 | void MAX44009Config::setInterruptEnable(uint8_t interruptEnable){ |
| mitea1 | 0:f2815503561f | 105 | this->interruptEnable = interruptEnable; |
| mitea1 | 0:f2815503561f | 106 | } |
| mitea1 | 0:f2815503561f | 107 | |
| mitea1 | 0:f2815503561f | 108 | void MAX44009Config::setInterruptUpperThreshold(uint8_t upperThreshold){ |
| mitea1 | 0:f2815503561f | 109 | this->upperThreshold = upperThreshold; |
| mitea1 | 0:f2815503561f | 110 | } |
| mitea1 | 0:f2815503561f | 111 | |
| mitea1 | 0:f2815503561f | 112 | void MAX44009Config::setInterruptLowerThreshold(uint8_t lowerThreshold){ |
| mitea1 | 0:f2815503561f | 113 | this->lowerThreshold = lowerThreshold; |
| mitea1 | 0:f2815503561f | 114 | } |