Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_NXP/TARGET_LPC13XX/pinmap.c
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
diff -r 7ca0bbba899b -r b3acfef78949 targets/hal/TARGET_NXP/TARGET_LPC13XX/pinmap.c --- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/pinmap.c Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,55 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#include "pinmap.h" -#include "error.h" - -#define LPC_IOCON0_BASE (LPC_IOCON_BASE) -#define LPC_IOCON1_BASE (LPC_IOCON_BASE + 0x60) - -void pin_function(PinName pin, int function) { - if (pin == (uint32_t)NC) return; - - uint32_t pin_number = (uint32_t)pin; - - __IO uint32_t *reg = (pin_number < 32) ? - (__IO uint32_t*)(LPC_IOCON0_BASE + 4 * pin_number) : - (__IO uint32_t*)(LPC_IOCON1_BASE + 4 * (pin_number - 32)); - - // pin function bits: [2:0] -> 111 = (0x7) - *reg = (*reg & ~0x7) | (function & 0x7); -} - -void pin_mode(PinName pin, PinMode mode) { - if (pin == (uint32_t)NC) { return; } - - uint32_t pin_number = (uint32_t)pin; - uint32_t drain = ((uint32_t) mode & (uint32_t) OpenDrain) >> 2; - - __IO uint32_t *reg = (pin_number < 32) ? - (__IO uint32_t*)(LPC_IOCON0_BASE + 4 * pin_number) : - (__IO uint32_t*)(LPC_IOCON1_BASE + 4 * (pin_number - 32)); - uint32_t tmp = *reg; - - // pin mode bits: [4:3] -> 11000 = (0x3 << 3) - tmp &= ~(0x3 << 3); - tmp |= (mode & 0x3) << 3; - - // drain - tmp &= ~(0x1 << 10); - tmp |= drain << 10; - - *reg = tmp; -}