Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_Freescale/TARGET_KL05Z/PeripheralNames.h
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
diff -r 7ca0bbba899b -r b3acfef78949 targets/hal/TARGET_Freescale/TARGET_KL05Z/PeripheralNames.h --- a/targets/hal/TARGET_Freescale/TARGET_KL05Z/PeripheralNames.h Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,79 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_PERIPHERALNAMES_H -#define MBED_PERIPHERALNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - -typedef enum { - UART_0 = (int)UART0_BASE -} UARTName; - -#define STDIO_UART_TX USBTX -#define STDIO_UART_RX USBRX -#define STDIO_UART UART_0 - -typedef enum { - I2C_0 = (int)I2C0_BASE -} I2CName; - -typedef enum { - ADC0_SE0 = 0, - ADC0_SE1 = 1, - ADC0_SE2 = 2, - ADC0_SE3 = 3, - ADC0_SE4 = 4, - ADC0_SE5 = 5, - ADC0_SE6 = 6, - ADC0_SE7 = 7, - ADC0_SE8 = 8, - ADC0_SE9 = 9, - ADC0_SE10 = 10, - ADC0_SE11 = 11, - ADC0_SE12 = 12, - ADC0_SE13 = 13 -} ADCName; - -typedef enum { - DAC_0 = 0 -} DACName; - -typedef enum { - SPI_0 = (int)SPI0_BASE -} SPIName; - -#define TPM_SHIFT 8 -typedef enum { - PWM_1 = (0 << TPM_SHIFT) | (0), // TPM0 CH0 - PWM_2 = (0 << TPM_SHIFT) | (1), // TPM0 CH1 - PWM_3 = (0 << TPM_SHIFT) | (2), // TPM0 CH2 - PWM_4 = (0 << TPM_SHIFT) | (3), // TPM0 CH3 - PWM_5 = (0 << TPM_SHIFT) | (4), // TPM0 CH4 - PWM_6 = (0 << TPM_SHIFT) | (5), // TPM0 CH5 - - PWM_7 = (1 << TPM_SHIFT) | (0), // TPM1 CH0 - PWM_8 = (1 << TPM_SHIFT) | (1), // TPM1 CH1 -} PWMName; - -#ifdef __cplusplus -} -#endif - -#endif