minicube.net .
Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of
mbed-src
by 
mbed official
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。（2013/10/28）
パスが通ってないだけのようなのでファイルを以下に移動する。
| mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
| TOOLCHAIN_ARM_MICRO |
をフォルダごと
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
| mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
 |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
Last commit 27 Oct 2013 by 
minicube.net .
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
| Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: common/I2CSlave.cpp
- Revision:
- 10:3bc89ef62ce7
- Parent:
- 9:0ce32e54c9a7
- Child:
- 13:0645d8841f51
diff -r 0ce32e54c9a7 -r 3bc89ef62ce7 common/I2CSlave.cpp
--- a/common/I2CSlave.cpp Mon Jun 10 16:03:00 2013 +0100
+++ b/common/I2CSlave.cpp Fri Jun 14 17:49:17 2013 +0100
@@ -1,63 +1,63 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "I2CSlave.h"
-
-#if DEVICE_I2CSLAVE
-
-namespace mbed {
-
-I2CSlave::I2CSlave(PinName sda, PinName scl) {
- i2c_init(&_i2c, sda, scl);
- i2c_frequency(&_i2c, 100000);
- i2c_slave_mode(&_i2c, 1);
-}
-
-void I2CSlave::frequency(int hz) {
- i2c_frequency(&_i2c, hz);
-}
-
-void I2CSlave::address(int address) {
- int addr = (address & 0xFF) | 1;
- i2c_slave_address(&_i2c, 0, addr, 0);
-}
-
-int I2CSlave::receive(void) {
- return i2c_slave_receive(&_i2c);
-}
-
-int I2CSlave::read(char *data, int length) {
- return i2c_slave_read(&_i2c, data, length);
-}
-
-int I2CSlave::read(void) {
- return i2c_byte_read(&_i2c, 0);
-}
-
-int I2CSlave::write(const char *data, int length) {
- return i2c_slave_write(&_i2c, data, length);
-}
-
-int I2CSlave::write(int data) {
- return i2c_byte_write(&_i2c, data);
-}
-
-void I2CSlave::stop(void) {
- i2c_stop(&_i2c);
-}
-
-}
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "I2CSlave.h"
+
+#if DEVICE_I2CSLAVE
+
+namespace mbed {
+
+I2CSlave::I2CSlave(PinName sda, PinName scl) {
+ i2c_init(&_i2c, sda, scl);
+ i2c_frequency(&_i2c, 100000);
+ i2c_slave_mode(&_i2c, 1);
+}
+
+void I2CSlave::frequency(int hz) {
+ i2c_frequency(&_i2c, hz);
+}
+
+void I2CSlave::address(int address) {
+ int addr = (address & 0xFF) | 1;
+ i2c_slave_address(&_i2c, 0, addr, 0);
+}
+
+int I2CSlave::receive(void) {
+ return i2c_slave_receive(&_i2c);
+}
+
+int I2CSlave::read(char *data, int length) {
+ return i2c_slave_read(&_i2c, data, length);
+}
+
+int I2CSlave::read(void) {
+ return i2c_byte_read(&_i2c, 0);
+}
+
+int I2CSlave::write(const char *data, int length) {
+ return i2c_slave_write(&_i2c, data, length);
+}
+
+int I2CSlave::write(int data) {
+ return i2c_byte_write(&_i2c, data);
+}
+
+void I2CSlave::stop(void) {
+ i2c_stop(&_i2c);
+}
+
+}
+
+#endif