Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: api/PortIn.h
- Revision:
- 10:3bc89ef62ce7
- Parent:
- 9:0ce32e54c9a7
- Child:
- 13:0645d8841f51
diff -r 0ce32e54c9a7 -r 3bc89ef62ce7 api/PortIn.h --- a/api/PortIn.h Mon Jun 10 16:03:00 2013 +0100 +++ b/api/PortIn.h Fri Jun 14 17:49:17 2013 +0100 @@ -1,93 +1,93 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_PORTIN_H -#define MBED_PORTIN_H - -#include "platform.h" - -#if DEVICE_PORTIN - -#include "port_api.h" - -namespace mbed { - -/** A multiple pin digital input - * - * Example: - * @code - * // Switch on an LED if any of mbed pins 21-26 is high - * - * #include "mbed.h" - * - * PortIn p(Port2, 0x0000003F); // p21-p26 - * DigitalOut ind(LED4); - * - * int main() { - * while(1) { - * int pins = p.read(); - * if(pins) { - * ind = 1; - * } else { - * ind = 0; - * } - * } - * } - * @endcode - */ -class PortIn { -public: - - /** Create an PortIn, connected to the specified port - * - * @param port Port to connect to (Port0-Port5) - * @param mask A bitmask to identify which bits in the port should be included (0 - ignore) - */ - PortIn(PortName port, int mask = 0xFFFFFFFF) { - port_init(&_port, port, mask, PIN_INPUT); - } - - /** Read the value currently output on the port - * - * @returns - * An integer with each bit corresponding to associated port pin setting - */ - int read() { - return port_read(&_port); - } - - /** Set the input pin mode - * - * @param mode PullUp, PullDown, PullNone, OpenDrain - */ - void mode(PinMode mode) { - port_mode(&_port, mode); - } - - /** A shorthand for read() - */ - operator int() { - return read(); - } - -private: - port_t _port; -}; - -} // namespace mbed - -#endif - -#endif +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PORTIN_H +#define MBED_PORTIN_H + +#include "platform.h" + +#if DEVICE_PORTIN + +#include "port_api.h" + +namespace mbed { + +/** A multiple pin digital input + * + * Example: + * @code + * // Switch on an LED if any of mbed pins 21-26 is high + * + * #include "mbed.h" + * + * PortIn p(Port2, 0x0000003F); // p21-p26 + * DigitalOut ind(LED4); + * + * int main() { + * while(1) { + * int pins = p.read(); + * if(pins) { + * ind = 1; + * } else { + * ind = 0; + * } + * } + * } + * @endcode + */ +class PortIn { +public: + + /** Create an PortIn, connected to the specified port + * + * @param port Port to connect to (Port0-Port5) + * @param mask A bitmask to identify which bits in the port should be included (0 - ignore) + */ + PortIn(PortName port, int mask = 0xFFFFFFFF) { + port_init(&_port, port, mask, PIN_INPUT); + } + + /** Read the value currently output on the port + * + * @returns + * An integer with each bit corresponding to associated port pin setting + */ + int read() { + return port_read(&_port); + } + + /** Set the input pin mode + * + * @param mode PullUp, PullDown, PullNone, OpenDrain + */ + void mode(PinMode mode) { + port_mode(&_port, mode); + } + + /** A shorthand for read() + */ + operator int() { + return read(); + } + +private: + port_t _port; +}; + +} // namespace mbed + +#endif + +#endif