Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: cpp/LocalFileSystem.h
- Revision:
- 2:143cac498751
- Parent:
- 0:fd0d7bdfcdc2
diff -r 62685faffa05 -r 143cac498751 cpp/LocalFileSystem.h --- a/cpp/LocalFileSystem.h Thu Nov 29 15:41:14 2012 +0000 +++ b/cpp/LocalFileSystem.h Mon Feb 18 11:44:18 2013 +0000 @@ -1,23 +1,17 @@ /* mbed Microcontroller Library - * Copyright (c) 2006-2012 ARM Limited + * Copyright (c) 2006-2013 ARM Limited * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. + * http://www.apache.org/licenses/LICENSE-2.0 * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. */ #ifndef MBED_LOCALFILESYSTEM_H #define MBED_LOCALFILESYSTEM_H @@ -36,19 +30,19 @@ public: LocalFileHandle(FILEHANDLE fh); - + virtual int close(); - + virtual ssize_t write(const void *buffer, size_t length); - + virtual ssize_t read(void *buffer, size_t length); - + virtual int isatty(); - + virtual off_t lseek(off_t position, int whence); - + virtual int fsync(); - + virtual off_t flen(); protected: @@ -56,10 +50,10 @@ int pos; }; -/** A filesystem for accessing the local mbed Microcontroller USB disk drive +/** A filesystem for accessing the local mbed Microcontroller USB disk drive * - * This allows programs to read and write files on the same disk drive that is used to program the - * mbed Microcontroller. Once created, the standard C file access functions are used to open, + * This allows programs to read and write files on the same disk drive that is used to program the + * mbed Microcontroller. Once created, the standard C file access functions are used to open, * read and write files. * * Example: @@ -70,8 +64,8 @@ * * int main() { * FILE *fp = fopen("/local/out.txt", "w"); // Open "out.txt" on the local file system for writing - * fprintf(fp, "Hello World!"); - * fclose(fp); + * fprintf(fp, "Hello World!"); + * fclose(fp); * remove("/local/out.txt"); // Removes the file "out.txt" from the local file system * * DIR *d = opendir("/local"); // Opens the root directory of the local file system @@ -94,7 +88,7 @@ public: LocalFileSystem(const char* n) : FileSystemLike(n) { - + } virtual FileHandle *open(const char* name, int flags);