Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: cpp/AnalogOut.h
- Revision:
- 2:143cac498751
- Parent:
- 0:fd0d7bdfcdc2
diff -r 62685faffa05 -r 143cac498751 cpp/AnalogOut.h --- a/cpp/AnalogOut.h Thu Nov 29 15:41:14 2012 +0000 +++ b/cpp/AnalogOut.h Mon Feb 18 11:44:18 2013 +0000 @@ -1,23 +1,17 @@ /* mbed Microcontroller Library - * Copyright (c) 2006-2012 ARM Limited + * Copyright (c) 2006-2013 ARM Limited * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. + * http://www.apache.org/licenses/LICENSE-2.0 * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. */ #ifndef MBED_ANALOGOUT_H #define MBED_ANALOGOUT_H @@ -35,9 +29,9 @@ * Example: * @code * // Make a sawtooth output - * + * * #include "mbed.h" - * + * * AnalogOut tri(p18); * int main() { * while(1) { @@ -55,16 +49,16 @@ public: /** Create an AnalogOut connected to the specified pin - * + * * @param AnalogOut pin to connect to (18) */ AnalogOut(PinName pin) { analogout_init(&_dac, pin); } - + /** Set the output voltage, specified as a percentage (float) * - * @param value A floating-point value representing the output voltage, + * @param value A floating-point value representing the output voltage, * specified as a percentage. The value should lie between * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%). * Values outside this range will be saturated to 0.0f or 1.0f. @@ -72,7 +66,7 @@ void write(float value) { analogout_write(&_dac, value); } - + /** Set the output voltage, represented as an unsigned short in the range [0x0, 0xFFFF] * * @param value 16-bit unsigned short representing the output voltage, @@ -85,7 +79,7 @@ /** Return the current output voltage setting, measured as a percentage (float) * * @returns - * A floating-point value representing the current voltage being output on the pin, + * A floating-point value representing the current voltage being output on the pin, * measured as a percentage. The returned value will lie between * 0.0f (representing 0v / 0%) and 1.0f (representing 3.3v / 100%). * @@ -103,7 +97,7 @@ write(percent); return *this; } - + AnalogOut& operator= (AnalogOut& rhs) { write(rhs.read()); return *this;