Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_NXP/TARGET_LPC23XX/PeripheralNames.h
- Revision:
- 13:0645d8841f51
diff -r 5fa2273de5db -r 0645d8841f51 targets/hal/TARGET_NXP/TARGET_LPC23XX/PeripheralNames.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC23XX/PeripheralNames.h Mon Aug 05 14:12:34 2013 +0300 @@ -0,0 +1,80 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + UART_0 = (int)LPC_UART0_BASE, + UART_1 = (int)LPC_UART1_BASE, + UART_2 = (int)LPC_UART2_BASE, + UART_3 = (int)LPC_UART3_BASE +} UARTName; + +typedef enum { + ADC0_0 = 0, + ADC0_1, + ADC0_2, + ADC0_3, + ADC0_4, + ADC0_5, + ADC0_6, + ADC0_7 +} ADCName; + +typedef enum { + DAC_0 = 0 +} DACName; + +typedef enum { + SPI_0 = (int)LPC_SSP0_BASE, + SPI_1 = (int)LPC_SSP1_BASE +} SPIName; + +typedef enum { + I2C_0 = (int)LPC_I2C0_BASE, + I2C_1 = (int)LPC_I2C1_BASE, + I2C_2 = (int)LPC_I2C2_BASE +} I2CName; + +typedef enum { + PWM_1 = 1, + PWM_2, + PWM_3, + PWM_4, + PWM_5, + PWM_6 +} PWMName; + +typedef enum { + CAN_1 = (int)LPC_CAN1_BASE, + CAN_2 = (int)LPC_CAN2_BASE +} CANName; + +#define STDIO_UART_TX USBTX +#define STDIO_UART_RX USBRX +#define STDIO_UART UART_0 + +#ifdef __cplusplus +} +#endif + +#endif