Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
capi/error.h@0:fd0d7bdfcdc2, 2012-11-20 (annotated)
- Committer:
- mbed_official
- Date:
- Tue Nov 20 17:24:08 2012 +0000
- Revision:
- 0:fd0d7bdfcdc2
- Child:
- 1:62685faffa05
mbed sources
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 0:fd0d7bdfcdc2 | 1 | /* mbed Microcontroller Library |
mbed_official | 0:fd0d7bdfcdc2 | 2 | * Copyright (c) 2006-2012 ARM Limited |
mbed_official | 0:fd0d7bdfcdc2 | 3 | * |
mbed_official | 0:fd0d7bdfcdc2 | 4 | * Permission is hereby granted, free of charge, to any person obtaining a copy |
mbed_official | 0:fd0d7bdfcdc2 | 5 | * of this software and associated documentation files (the "Software"), to deal |
mbed_official | 0:fd0d7bdfcdc2 | 6 | * in the Software without restriction, including without limitation the rights |
mbed_official | 0:fd0d7bdfcdc2 | 7 | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
mbed_official | 0:fd0d7bdfcdc2 | 8 | * copies of the Software, and to permit persons to whom the Software is |
mbed_official | 0:fd0d7bdfcdc2 | 9 | * furnished to do so, subject to the following conditions: |
mbed_official | 0:fd0d7bdfcdc2 | 10 | * |
mbed_official | 0:fd0d7bdfcdc2 | 11 | * The above copyright notice and this permission notice shall be included in |
mbed_official | 0:fd0d7bdfcdc2 | 12 | * all copies or substantial portions of the Software. |
mbed_official | 0:fd0d7bdfcdc2 | 13 | * |
mbed_official | 0:fd0d7bdfcdc2 | 14 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
mbed_official | 0:fd0d7bdfcdc2 | 15 | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
mbed_official | 0:fd0d7bdfcdc2 | 16 | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
mbed_official | 0:fd0d7bdfcdc2 | 17 | * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
mbed_official | 0:fd0d7bdfcdc2 | 18 | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
mbed_official | 0:fd0d7bdfcdc2 | 19 | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
mbed_official | 0:fd0d7bdfcdc2 | 20 | * SOFTWARE. |
mbed_official | 0:fd0d7bdfcdc2 | 21 | */ |
mbed_official | 0:fd0d7bdfcdc2 | 22 | #ifndef MBED_ERROR_H |
mbed_official | 0:fd0d7bdfcdc2 | 23 | #define MBED_ERROR_H |
mbed_official | 0:fd0d7bdfcdc2 | 24 | |
mbed_official | 0:fd0d7bdfcdc2 | 25 | /** To generate a fatal compile-time error, you can use the pre-processor #error directive. |
mbed_official | 0:fd0d7bdfcdc2 | 26 | * |
mbed_official | 0:fd0d7bdfcdc2 | 27 | * @code |
mbed_official | 0:fd0d7bdfcdc2 | 28 | * #error "That shouldn't have happened!" |
mbed_official | 0:fd0d7bdfcdc2 | 29 | * @endcode |
mbed_official | 0:fd0d7bdfcdc2 | 30 | * |
mbed_official | 0:fd0d7bdfcdc2 | 31 | * If the compiler evaluates this line, it will report the error and stop the compile. |
mbed_official | 0:fd0d7bdfcdc2 | 32 | * |
mbed_official | 0:fd0d7bdfcdc2 | 33 | * For example, you could use this to check some user-defined compile-time variables: |
mbed_official | 0:fd0d7bdfcdc2 | 34 | * |
mbed_official | 0:fd0d7bdfcdc2 | 35 | * @code |
mbed_official | 0:fd0d7bdfcdc2 | 36 | * #define NUM_PORTS 7 |
mbed_official | 0:fd0d7bdfcdc2 | 37 | * #if (NUM_PORTS > 4) |
mbed_official | 0:fd0d7bdfcdc2 | 38 | * #error "NUM_PORTS must be less than 4" |
mbed_official | 0:fd0d7bdfcdc2 | 39 | * #endif |
mbed_official | 0:fd0d7bdfcdc2 | 40 | * @endcode |
mbed_official | 0:fd0d7bdfcdc2 | 41 | * |
mbed_official | 0:fd0d7bdfcdc2 | 42 | * Reporting Run-Time Errors: |
mbed_official | 0:fd0d7bdfcdc2 | 43 | * To generate a fatal run-time error, you can use the mbed error() function. |
mbed_official | 0:fd0d7bdfcdc2 | 44 | * |
mbed_official | 0:fd0d7bdfcdc2 | 45 | * @code |
mbed_official | 0:fd0d7bdfcdc2 | 46 | * error("That shouldn't have happened!"); |
mbed_official | 0:fd0d7bdfcdc2 | 47 | * @endcode |
mbed_official | 0:fd0d7bdfcdc2 | 48 | * |
mbed_official | 0:fd0d7bdfcdc2 | 49 | * If the mbed running the program executes this function, it will print the |
mbed_official | 0:fd0d7bdfcdc2 | 50 | * message via the USB serial port, and then die with the blue lights of death! |
mbed_official | 0:fd0d7bdfcdc2 | 51 | * |
mbed_official | 0:fd0d7bdfcdc2 | 52 | * The message can use printf-style formatting, so you can report variables in the |
mbed_official | 0:fd0d7bdfcdc2 | 53 | * message too. For example, you could use this to check a run-time condition: |
mbed_official | 0:fd0d7bdfcdc2 | 54 | * |
mbed_official | 0:fd0d7bdfcdc2 | 55 | * @code |
mbed_official | 0:fd0d7bdfcdc2 | 56 | * if(x >= 5) { |
mbed_official | 0:fd0d7bdfcdc2 | 57 | * error("expected x to be less than 5, but got %d", x); |
mbed_official | 0:fd0d7bdfcdc2 | 58 | * } |
mbed_official | 0:fd0d7bdfcdc2 | 59 | * #endcode |
mbed_official | 0:fd0d7bdfcdc2 | 60 | */ |
mbed_official | 0:fd0d7bdfcdc2 | 61 | |
mbed_official | 0:fd0d7bdfcdc2 | 62 | #include <stdlib.h> |
mbed_official | 0:fd0d7bdfcdc2 | 63 | #include "device.h" |
mbed_official | 0:fd0d7bdfcdc2 | 64 | |
mbed_official | 0:fd0d7bdfcdc2 | 65 | #ifdef DEVICE_STDIO_ERROR |
mbed_official | 0:fd0d7bdfcdc2 | 66 | #include <stdio.h> |
mbed_official | 0:fd0d7bdfcdc2 | 67 | #define error(...) (fprintf(stderr, __VA_ARGS__), exit(1)) |
mbed_official | 0:fd0d7bdfcdc2 | 68 | #else |
mbed_official | 0:fd0d7bdfcdc2 | 69 | #define error(...) (exit(1)) |
mbed_official | 0:fd0d7bdfcdc2 | 70 | #endif |
mbed_official | 0:fd0d7bdfcdc2 | 71 | |
mbed_official | 0:fd0d7bdfcdc2 | 72 | #endif |