Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
api/SerialBase.h@36:ab3ee77451e7, 2013-10-23 (annotated)
- Committer:
- mbed_official
- Date:
- Wed Oct 23 14:15:04 2013 +0100
- Revision:
- 36:ab3ee77451e7
Synchronized with git revision 2404dc0092fa583d899df3d9021a4ddb4510b011
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 36:ab3ee77451e7 | 1 | /* mbed Microcontroller Library |
mbed_official | 36:ab3ee77451e7 | 2 | * Copyright (c) 2006-2013 ARM Limited |
mbed_official | 36:ab3ee77451e7 | 3 | * |
mbed_official | 36:ab3ee77451e7 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
mbed_official | 36:ab3ee77451e7 | 5 | * you may not use this file except in compliance with the License. |
mbed_official | 36:ab3ee77451e7 | 6 | * You may obtain a copy of the License at |
mbed_official | 36:ab3ee77451e7 | 7 | * |
mbed_official | 36:ab3ee77451e7 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
mbed_official | 36:ab3ee77451e7 | 9 | * |
mbed_official | 36:ab3ee77451e7 | 10 | * Unless required by applicable law or agreed to in writing, software |
mbed_official | 36:ab3ee77451e7 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
mbed_official | 36:ab3ee77451e7 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
mbed_official | 36:ab3ee77451e7 | 13 | * See the License for the specific language governing permissions and |
mbed_official | 36:ab3ee77451e7 | 14 | * limitations under the License. |
mbed_official | 36:ab3ee77451e7 | 15 | */ |
mbed_official | 36:ab3ee77451e7 | 16 | #ifndef MBED_SERIALBASE_H |
mbed_official | 36:ab3ee77451e7 | 17 | #define MBED_SERIALBASE_H |
mbed_official | 36:ab3ee77451e7 | 18 | |
mbed_official | 36:ab3ee77451e7 | 19 | #include "platform.h" |
mbed_official | 36:ab3ee77451e7 | 20 | |
mbed_official | 36:ab3ee77451e7 | 21 | #if DEVICE_SERIAL |
mbed_official | 36:ab3ee77451e7 | 22 | |
mbed_official | 36:ab3ee77451e7 | 23 | #include "Stream.h" |
mbed_official | 36:ab3ee77451e7 | 24 | #include "FunctionPointer.h" |
mbed_official | 36:ab3ee77451e7 | 25 | #include "serial_api.h" |
mbed_official | 36:ab3ee77451e7 | 26 | |
mbed_official | 36:ab3ee77451e7 | 27 | namespace mbed { |
mbed_official | 36:ab3ee77451e7 | 28 | |
mbed_official | 36:ab3ee77451e7 | 29 | /** A base class for serial port implementations |
mbed_official | 36:ab3ee77451e7 | 30 | * Can't be instantiated directly (use Serial or RawSerial) |
mbed_official | 36:ab3ee77451e7 | 31 | */ |
mbed_official | 36:ab3ee77451e7 | 32 | class SerialBase { |
mbed_official | 36:ab3ee77451e7 | 33 | |
mbed_official | 36:ab3ee77451e7 | 34 | public: |
mbed_official | 36:ab3ee77451e7 | 35 | /** Set the baud rate of the serial port |
mbed_official | 36:ab3ee77451e7 | 36 | * |
mbed_official | 36:ab3ee77451e7 | 37 | * @param baudrate The baudrate of the serial port (default = 9600). |
mbed_official | 36:ab3ee77451e7 | 38 | */ |
mbed_official | 36:ab3ee77451e7 | 39 | void baud(int baudrate); |
mbed_official | 36:ab3ee77451e7 | 40 | |
mbed_official | 36:ab3ee77451e7 | 41 | enum Parity { |
mbed_official | 36:ab3ee77451e7 | 42 | None = 0, |
mbed_official | 36:ab3ee77451e7 | 43 | Odd, |
mbed_official | 36:ab3ee77451e7 | 44 | Even, |
mbed_official | 36:ab3ee77451e7 | 45 | Forced1, |
mbed_official | 36:ab3ee77451e7 | 46 | Forced0 |
mbed_official | 36:ab3ee77451e7 | 47 | }; |
mbed_official | 36:ab3ee77451e7 | 48 | |
mbed_official | 36:ab3ee77451e7 | 49 | enum IrqType { |
mbed_official | 36:ab3ee77451e7 | 50 | RxIrq = 0, |
mbed_official | 36:ab3ee77451e7 | 51 | TxIrq |
mbed_official | 36:ab3ee77451e7 | 52 | }; |
mbed_official | 36:ab3ee77451e7 | 53 | |
mbed_official | 36:ab3ee77451e7 | 54 | /** Set the transmission format used by the serial port |
mbed_official | 36:ab3ee77451e7 | 55 | * |
mbed_official | 36:ab3ee77451e7 | 56 | * @param bits The number of bits in a word (5-8; default = 8) |
mbed_official | 36:ab3ee77451e7 | 57 | * @param parity The parity used (SerialBase::None, SerialBase::Odd, SerialBase::Even, SerialBase::Forced1, SerialBase::Forced0; default = SerialBase::None) |
mbed_official | 36:ab3ee77451e7 | 58 | * @param stop The number of stop bits (1 or 2; default = 1) |
mbed_official | 36:ab3ee77451e7 | 59 | */ |
mbed_official | 36:ab3ee77451e7 | 60 | void format(int bits=8, Parity parity=SerialBase::None, int stop_bits=1); |
mbed_official | 36:ab3ee77451e7 | 61 | |
mbed_official | 36:ab3ee77451e7 | 62 | /** Determine if there is a character available to read |
mbed_official | 36:ab3ee77451e7 | 63 | * |
mbed_official | 36:ab3ee77451e7 | 64 | * @returns |
mbed_official | 36:ab3ee77451e7 | 65 | * 1 if there is a character available to read, |
mbed_official | 36:ab3ee77451e7 | 66 | * 0 otherwise |
mbed_official | 36:ab3ee77451e7 | 67 | */ |
mbed_official | 36:ab3ee77451e7 | 68 | int readable(); |
mbed_official | 36:ab3ee77451e7 | 69 | |
mbed_official | 36:ab3ee77451e7 | 70 | /** Determine if there is space available to write a character |
mbed_official | 36:ab3ee77451e7 | 71 | * |
mbed_official | 36:ab3ee77451e7 | 72 | * @returns |
mbed_official | 36:ab3ee77451e7 | 73 | * 1 if there is space to write a character, |
mbed_official | 36:ab3ee77451e7 | 74 | * 0 otherwise |
mbed_official | 36:ab3ee77451e7 | 75 | */ |
mbed_official | 36:ab3ee77451e7 | 76 | int writeable(); |
mbed_official | 36:ab3ee77451e7 | 77 | |
mbed_official | 36:ab3ee77451e7 | 78 | /** Attach a function to call whenever a serial interrupt is generated |
mbed_official | 36:ab3ee77451e7 | 79 | * |
mbed_official | 36:ab3ee77451e7 | 80 | * @param fptr A pointer to a void function, or 0 to set as none |
mbed_official | 36:ab3ee77451e7 | 81 | * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty) |
mbed_official | 36:ab3ee77451e7 | 82 | */ |
mbed_official | 36:ab3ee77451e7 | 83 | void attach(void (*fptr)(void), IrqType type=RxIrq); |
mbed_official | 36:ab3ee77451e7 | 84 | |
mbed_official | 36:ab3ee77451e7 | 85 | /** Attach a member function to call whenever a serial interrupt is generated |
mbed_official | 36:ab3ee77451e7 | 86 | * |
mbed_official | 36:ab3ee77451e7 | 87 | * @param tptr pointer to the object to call the member function on |
mbed_official | 36:ab3ee77451e7 | 88 | * @param mptr pointer to the member function to be called |
mbed_official | 36:ab3ee77451e7 | 89 | * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty) |
mbed_official | 36:ab3ee77451e7 | 90 | */ |
mbed_official | 36:ab3ee77451e7 | 91 | template<typename T> |
mbed_official | 36:ab3ee77451e7 | 92 | void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) { |
mbed_official | 36:ab3ee77451e7 | 93 | if((mptr != NULL) && (tptr != NULL)) { |
mbed_official | 36:ab3ee77451e7 | 94 | _irq[type].attach(tptr, mptr); |
mbed_official | 36:ab3ee77451e7 | 95 | serial_irq_set(&_serial, (SerialIrq)type, 1); |
mbed_official | 36:ab3ee77451e7 | 96 | } |
mbed_official | 36:ab3ee77451e7 | 97 | } |
mbed_official | 36:ab3ee77451e7 | 98 | |
mbed_official | 36:ab3ee77451e7 | 99 | /** Generate a break condition on the serial line |
mbed_official | 36:ab3ee77451e7 | 100 | */ |
mbed_official | 36:ab3ee77451e7 | 101 | void send_break(); |
mbed_official | 36:ab3ee77451e7 | 102 | |
mbed_official | 36:ab3ee77451e7 | 103 | static void _irq_handler(uint32_t id, SerialIrq irq_type); |
mbed_official | 36:ab3ee77451e7 | 104 | |
mbed_official | 36:ab3ee77451e7 | 105 | protected: |
mbed_official | 36:ab3ee77451e7 | 106 | SerialBase(PinName tx, PinName rx); |
mbed_official | 36:ab3ee77451e7 | 107 | |
mbed_official | 36:ab3ee77451e7 | 108 | int _base_getc(); |
mbed_official | 36:ab3ee77451e7 | 109 | int _base_putc(int c); |
mbed_official | 36:ab3ee77451e7 | 110 | |
mbed_official | 36:ab3ee77451e7 | 111 | serial_t _serial; |
mbed_official | 36:ab3ee77451e7 | 112 | FunctionPointer _irq[2]; |
mbed_official | 36:ab3ee77451e7 | 113 | int _baud; |
mbed_official | 36:ab3ee77451e7 | 114 | }; |
mbed_official | 36:ab3ee77451e7 | 115 | |
mbed_official | 36:ab3ee77451e7 | 116 | } // namespace mbed |
mbed_official | 36:ab3ee77451e7 | 117 | |
mbed_official | 36:ab3ee77451e7 | 118 | #endif |
mbed_official | 36:ab3ee77451e7 | 119 | |
mbed_official | 36:ab3ee77451e7 | 120 | #endif |