Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
api/error.h@10:3bc89ef62ce7, 2013-06-14 (annotated)
- Committer:
- emilmont
- Date:
- Fri Jun 14 17:49:17 2013 +0100
- Revision:
- 10:3bc89ef62ce7
- Parent:
- 9:0ce32e54c9a7
- Child:
- 13:0645d8841f51
Unify mbed library sources
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
emilmont | 10:3bc89ef62ce7 | 1 | /* mbed Microcontroller Library |
emilmont | 10:3bc89ef62ce7 | 2 | * Copyright (c) 2006-2013 ARM Limited |
emilmont | 10:3bc89ef62ce7 | 3 | * |
emilmont | 10:3bc89ef62ce7 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
emilmont | 10:3bc89ef62ce7 | 5 | * you may not use this file except in compliance with the License. |
emilmont | 10:3bc89ef62ce7 | 6 | * You may obtain a copy of the License at |
emilmont | 10:3bc89ef62ce7 | 7 | * |
emilmont | 10:3bc89ef62ce7 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
emilmont | 10:3bc89ef62ce7 | 9 | * |
emilmont | 10:3bc89ef62ce7 | 10 | * Unless required by applicable law or agreed to in writing, software |
emilmont | 10:3bc89ef62ce7 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
emilmont | 10:3bc89ef62ce7 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
emilmont | 10:3bc89ef62ce7 | 13 | * See the License for the specific language governing permissions and |
emilmont | 10:3bc89ef62ce7 | 14 | * limitations under the License. |
emilmont | 10:3bc89ef62ce7 | 15 | */ |
emilmont | 10:3bc89ef62ce7 | 16 | #ifndef MBED_ERROR_H |
emilmont | 10:3bc89ef62ce7 | 17 | #define MBED_ERROR_H |
emilmont | 10:3bc89ef62ce7 | 18 | |
emilmont | 10:3bc89ef62ce7 | 19 | /** To generate a fatal compile-time error, you can use the pre-processor #error directive. |
emilmont | 10:3bc89ef62ce7 | 20 | * |
emilmont | 10:3bc89ef62ce7 | 21 | * @code |
emilmont | 10:3bc89ef62ce7 | 22 | * #error "That shouldn't have happened!" |
emilmont | 10:3bc89ef62ce7 | 23 | * @endcode |
emilmont | 10:3bc89ef62ce7 | 24 | * |
emilmont | 10:3bc89ef62ce7 | 25 | * If the compiler evaluates this line, it will report the error and stop the compile. |
emilmont | 10:3bc89ef62ce7 | 26 | * |
emilmont | 10:3bc89ef62ce7 | 27 | * For example, you could use this to check some user-defined compile-time variables: |
emilmont | 10:3bc89ef62ce7 | 28 | * |
emilmont | 10:3bc89ef62ce7 | 29 | * @code |
emilmont | 10:3bc89ef62ce7 | 30 | * #define NUM_PORTS 7 |
emilmont | 10:3bc89ef62ce7 | 31 | * #if (NUM_PORTS > 4) |
emilmont | 10:3bc89ef62ce7 | 32 | * #error "NUM_PORTS must be less than 4" |
emilmont | 10:3bc89ef62ce7 | 33 | * #endif |
emilmont | 10:3bc89ef62ce7 | 34 | * @endcode |
emilmont | 10:3bc89ef62ce7 | 35 | * |
emilmont | 10:3bc89ef62ce7 | 36 | * Reporting Run-Time Errors: |
emilmont | 10:3bc89ef62ce7 | 37 | * To generate a fatal run-time error, you can use the mbed error() function. |
emilmont | 10:3bc89ef62ce7 | 38 | * |
emilmont | 10:3bc89ef62ce7 | 39 | * @code |
emilmont | 10:3bc89ef62ce7 | 40 | * error("That shouldn't have happened!"); |
emilmont | 10:3bc89ef62ce7 | 41 | * @endcode |
emilmont | 10:3bc89ef62ce7 | 42 | * |
emilmont | 10:3bc89ef62ce7 | 43 | * If the mbed running the program executes this function, it will print the |
emilmont | 10:3bc89ef62ce7 | 44 | * message via the USB serial port, and then die with the blue lights of death! |
emilmont | 10:3bc89ef62ce7 | 45 | * |
emilmont | 10:3bc89ef62ce7 | 46 | * The message can use printf-style formatting, so you can report variables in the |
emilmont | 10:3bc89ef62ce7 | 47 | * message too. For example, you could use this to check a run-time condition: |
emilmont | 10:3bc89ef62ce7 | 48 | * |
emilmont | 10:3bc89ef62ce7 | 49 | * @code |
emilmont | 10:3bc89ef62ce7 | 50 | * if(x >= 5) { |
emilmont | 10:3bc89ef62ce7 | 51 | * error("expected x to be less than 5, but got %d", x); |
emilmont | 10:3bc89ef62ce7 | 52 | * } |
emilmont | 10:3bc89ef62ce7 | 53 | * #endcode |
emilmont | 10:3bc89ef62ce7 | 54 | */ |
emilmont | 10:3bc89ef62ce7 | 55 | |
emilmont | 10:3bc89ef62ce7 | 56 | #include <stdlib.h> |
emilmont | 10:3bc89ef62ce7 | 57 | #include "device.h" |
emilmont | 10:3bc89ef62ce7 | 58 | |
emilmont | 10:3bc89ef62ce7 | 59 | #ifdef DEVICE_STDIO_MESSAGES |
emilmont | 10:3bc89ef62ce7 | 60 | #include <stdio.h> |
emilmont | 10:3bc89ef62ce7 | 61 | #define error(...) (fprintf(stderr, __VA_ARGS__), exit(1)) |
emilmont | 10:3bc89ef62ce7 | 62 | #else |
emilmont | 10:3bc89ef62ce7 | 63 | #define error(...) (exit(1)) |
emilmont | 10:3bc89ef62ce7 | 64 | #endif |
emilmont | 10:3bc89ef62ce7 | 65 | |
emilmont | 10:3bc89ef62ce7 | 66 | #endif |