Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
cpp/SPISlave.h
- Committer:
- mbed_official
- Date:
- 2012-11-20
- Revision:
- 0:fd0d7bdfcdc2
- Child:
- 2:143cac498751
File content as of revision 0:fd0d7bdfcdc2:
/* mbed Microcontroller Library * Copyright (c) 2006-2012 ARM Limited * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. */ #ifndef MBED_SPISLAVE_H #define MBED_SPISLAVE_H #include "platform.h" #if DEVICE_SPISLAVE #include "spi_api.h" namespace mbed { /** A SPI slave, used for communicating with a SPI Master device * * The default format is set to 8-bits, mode 0, and a clock frequency of 1MHz * * Example: * @code * // Reply to a SPI master as slave * * #include "mbed.h" * * SPISlave device(p5, p6, p7, p8); // mosi, miso, sclk, ssel * * int main() { * device.reply(0x00); // Prime SPI with first reply * while(1) { * if(device.receive()) { * int v = device.read(); // Read byte from master * v = (v + 1) % 0x100; // Add one to it, modulo 256 * device.reply(v); // Make this the next reply * } * } * } * @endcode */ class SPISlave { public: /** Create a SPI slave connected to the specified pins * * Pin Options: * (5, 6, 7i, 8) or (11, 12, 13, 14) * * mosi or miso can be specfied as NC if not used * * @param mosi SPI Master Out, Slave In pin * @param miso SPI Master In, Slave Out pin * @param sclk SPI Clock pin * @param ssel SPI chip select pin * @param name (optional) A string to identify the object */ SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel); /** Configure the data transmission format * * @param bits Number of bits per SPI frame (4 - 16) * @param mode Clock polarity and phase mode (0 - 3) * * @code * mode | POL PHA * -----+-------- * 0 | 0 0 * 1 | 0 1 * 2 | 1 0 * 3 | 1 1 * @endcode */ void format(int bits, int mode = 0); /** Set the spi bus clock frequency * * @param hz SCLK frequency in hz (default = 1MHz) */ void frequency(int hz = 1000000); /** Polls the SPI to see if data has been received * * @returns * 0 if no data, * 1 otherwise */ int receive(void); /** Retrieve data from receive buffer as slave * * @returns * the data in the receive buffer */ int read(void); /** Fill the transmission buffer with the value to be written out * as slave on the next received message from the master. * * @param value the data to be transmitted next */ void reply(int value); protected: spi_t _spi; int _bits; int _mode; int _hz; }; } // namespace mbed #endif #endif