Fork of mbed-src file paths change. LPC1114FN28 use only.

Fork of mbed-src by mbed official

Information

この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。

・使う物
LPC1114FN28
mbed SDK

LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28) /media/uploads/minicube/mbed_lpc1114_sdk.png

パスが通ってないだけのようなのでファイルを以下に移動する。

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある

TOOLCHAIN_ARM_MICRO

をフォルダごと

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\hal\TARGET_NXP\

へ移動

移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。

/media/uploads/minicube/mbed_lpc1114_sdk_tree.png


ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。

Import librarymbed-src-LPC1114FN28

Fork of mbed-src file paths change. LPC1114FN28 use only.


エラーが出力される場合

"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。

Error: Undefined symbol _initial_sp (referred from entry2.o).
Error: Undefined symbol _heap_base (referred from malloc.o).
Error: Undefined symbol _heap_limit (referred from malloc.o).

LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。

common/InterruptIn.cpp

Committer:
minicube
Date:
2013-10-27
Revision:
43:b3acfef78949
Parent:
36:ab3ee77451e7

File content as of revision 43:b3acfef78949:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "InterruptIn.h"

#if DEVICE_INTERRUPTIN

namespace mbed {

InterruptIn::InterruptIn(PinName pin) {
    gpio_irq_init(&gpio_irq, pin, (&InterruptIn::_irq_handler), (uint32_t)this);
    gpio_init(&gpio, pin, PIN_INPUT);
}

InterruptIn::~InterruptIn() {
    gpio_irq_free(&gpio_irq);
}

int InterruptIn::read() {
    return gpio_read(&gpio);
}

void InterruptIn::mode(PinMode pull) {
    gpio_mode(&gpio, pull);
}

void InterruptIn::rise(void (*fptr)(void)) {
    if (fptr) {
        _rise.attach(fptr);
        gpio_irq_set(&gpio_irq, IRQ_RISE, 1);
    } else {
        gpio_irq_set(&gpio_irq, IRQ_RISE, 0);
    }
}

void InterruptIn::fall(void (*fptr)(void)) {
    if (fptr) {
        _fall.attach(fptr);
        gpio_irq_set(&gpio_irq, IRQ_FALL, 1);
    } else {
        gpio_irq_set(&gpio_irq, IRQ_FALL, 0);
    }
}

void InterruptIn::_irq_handler(uint32_t id, gpio_irq_event event) {
    InterruptIn *handler = (InterruptIn*)id;
    switch (event) {
        case IRQ_RISE: handler->_rise.call(); break;
        case IRQ_FALL: handler->_fall.call(); break;
        case IRQ_NONE: break;
    }
}

void InterruptIn::enable_irq() {
    gpio_irq_enable(&gpio_irq);
}

void InterruptIn::disable_irq() {
    gpio_irq_disable(&gpio_irq);
}

#ifdef MBED_OPERATORS
InterruptIn::operator int() {
    return read();
}
#endif

} // namespace mbed

#endif