Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
cpp/Serial.h
- Committer:
- emilmont
- Date:
- 2013-02-18
- Revision:
- 2:143cac498751
- Parent:
- 0:fd0d7bdfcdc2
File content as of revision 2:143cac498751:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_SERIAL_H #define MBED_SERIAL_H #include "platform.h" #if DEVICE_SERIAL #include "Stream.h" #include "FunctionPointer.h" #include "serial_api.h" namespace mbed { /** A serial port (UART) for communication with other serial devices * * Can be used for Full Duplex communication, or Simplex by specifying * one pin as NC (Not Connected) * * Example: * @code * // Print "Hello World" to the PC * * #include "mbed.h" * * Serial pc(USBTX, USBRX); * * int main() { * pc.printf("Hello World\n"); * } * @endcode */ class Serial : public Stream { public: /** Create a Serial port, connected to the specified transmit and receive pins * * @param tx Transmit pin * @param rx Receive pin * * @note * Either tx or rx may be specified as NC if unused */ Serial(PinName tx, PinName rx, const char *name=NULL); /** Set the baud rate of the serial port * * @param baudrate The baudrate of the serial port (default = 9600). */ void baud(int baudrate); enum Parity { None = 0, Odd, Even, Forced1, Forced0 }; enum IrqType { RxIrq = 0, TxIrq }; /** Set the transmission format used by the Serial port * * @param bits The number of bits in a word (5-8; default = 8) * @param parity The parity used (Serial::None, Serial::Odd, Serial::Even, Serial::Forced1, Serial::Forced0; default = Serial::None) * @param stop The number of stop bits (1 or 2; default = 1) */ void format(int bits = 8, Parity parity=Serial::None, int stop_bits=1); /** Determine if there is a character available to read * * @returns * 1 if there is a character available to read, * 0 otherwise */ int readable(); /** Determine if there is space available to write a character * * @returns * 1 if there is space to write a character, * 0 otherwise */ int writeable(); /** Attach a function to call whenever a serial interrupt is generated * * @param fptr A pointer to a void function, or 0 to set as none * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty) */ void attach(void (*fptr)(void), IrqType type=RxIrq); /** Attach a member function to call whenever a serial interrupt is generated * * @param tptr pointer to the object to call the member function on * @param mptr pointer to the member function to be called * @param type Which serial interrupt to attach the member function to (Seriall::RxIrq for receive, TxIrq for transmit buffer empty) */ template<typename T> void attach(T* tptr, void (T::*mptr)(void), IrqType type=RxIrq) { if((mptr != NULL) && (tptr != NULL)) { _irq[type].attach(tptr, mptr); serial_irq_set(&_serial, (SerialIrq)type, 1); } } static void _irq_handler(uint32_t id, SerialIrq irq_type); protected: virtual int _getc(); virtual int _putc(int c); serial_t _serial; FunctionPointer _irq[2]; }; } // namespace mbed #endif #endif