Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
common/SPI.cpp
- Committer:
- emilmont
- Date:
- 2013-06-10
- Revision:
- 9:0ce32e54c9a7
- Parent:
- cpp/SPI.cpp@ 2:143cac498751
- Child:
- 10:3bc89ef62ce7
File content as of revision 9:0ce32e54c9a7:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "SPI.h" #if DEVICE_SPI namespace mbed { SPI::SPI(PinName mosi, PinName miso, PinName sclk) { spi_init(&_spi, mosi, miso, sclk, NC); _bits = 8; _mode = 0; _hz = 1000000; spi_format(&_spi, _bits, _mode, 0); spi_frequency(&_spi, _hz); } void SPI::format(int bits, int mode) { _bits = bits; _mode = mode; SPI::_owner = NULL; // Not that elegant, but works. rmeyer aquire(); } void SPI::frequency(int hz) { _hz = hz; SPI::_owner = NULL; // Not that elegant, but works. rmeyer aquire(); } SPI* SPI::_owner = NULL; // ignore the fact there are multiple physical spis, and always update if it wasnt us last void SPI::aquire() { if (_owner != this) { spi_format(&_spi, _bits, _mode, 0); spi_frequency(&_spi, _hz); _owner = this; } } int SPI::write(int value) { aquire(); return spi_master_write(&_spi, value); } } // namespace mbed #endif