Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
api/BusOut.h
- Committer:
- emilmont
- Date:
- 2013-06-10
- Revision:
- 9:0ce32e54c9a7
- Parent:
- cpp/BusOut.h@ 2:143cac498751
- Child:
- 10:3bc89ef62ce7
File content as of revision 9:0ce32e54c9a7:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_BUSOUT_H #define MBED_BUSOUT_H #include "DigitalOut.h" namespace mbed { /** A digital output bus, used for setting the state of a collection of pins */ class BusOut { public: /** Create an BusOut, connected to the specified pins * * @param p<n> DigitalOut pin to connect to bus bit <n> (p5-p30, NC) * * @note * It is only required to specify as many pin variables as is required * for the bus; the rest will default to NC (not connected) */ BusOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC, PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC, PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC, PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC); BusOut(PinName pins[16]); virtual ~BusOut(); /** Write the value to the output bus * * @param value An integer specifying a bit to write for every corresponding DigitalOut pin */ void write(int value); /** Read the value currently output on the bus * * @returns * An integer with each bit corresponding to associated DigitalOut pin setting */ int read(); #ifdef MBED_OPERATORS /** A shorthand for write() */ BusOut& operator= (int v); BusOut& operator= (BusOut& rhs); /** A shorthand for read() */ operator int(); #endif protected: DigitalOut* _pin[16]; }; } // namespace mbed #endif