Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: capi/board.c
- Revision:
- 4:c4bfb462ca53
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/capi/board.c Wed Mar 13 15:04:05 2013 +0000 @@ -0,0 +1,55 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "gpio_api.h" +#include "wait_api.h" +#include "toolchain.h" + +WEAK void mbed_die(void); +WEAK void mbed_die(void) { +#if defined(DEVICE_ERROR_RED) + gpio_t led_red; gpio_init(&led_red, LED_RED, PIN_OUTPUT); + +#elif defined(DEVICE_ERROR_PATTERN) + gpio_t led_1; gpio_init(&led_1, LED1, PIN_OUTPUT); + gpio_t led_2; gpio_init(&led_2, LED2, PIN_OUTPUT); + gpio_t led_3; gpio_init(&led_3, LED3, PIN_OUTPUT); + gpio_t led_4; gpio_init(&led_4, LED4, PIN_OUTPUT); +#endif + + while (1) { +#if defined(DEVICE_ERROR_RED) + gpio_write(&led_red, 1); + +#elif defined(DEVICE_ERROR_PATTERN) + gpio_write(&led_1, 1); + gpio_write(&led_2, 0); + gpio_write(&led_3, 0); + gpio_write(&led_4, 1); +#endif + wait_ms(150); + +#if defined(DEVICE_ERROR_RED) + gpio_write(&led_red, 0); + +#elif defined(DEVICE_ERROR_PATTERN) + gpio_write(&led_1, 0); + gpio_write(&led_2, 1); + gpio_write(&led_3, 1); + gpio_write(&led_4, 0); +#endif + wait_ms(150); + } +}