Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_Freescale/TARGET_KL46Z/port_api.c
- Revision:
- 31:42176bc3c368
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KL46Z/port_api.c Wed Sep 25 11:30:05 2013 +0100 @@ -0,0 +1,68 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "port_api.h" +#include "pinmap.h" +#include "gpio_api.h" + +PinName port_pin(PortName port, int pin_n) { + return (PinName)((port << PORT_SHIFT) | (pin_n << 2)); +} + +void port_init(port_t *obj, PortName port, int mask, PinDirection dir) { + obj->port = port; + obj->mask = mask; + + FGPIO_Type *reg = (FGPIO_Type *)(FPTA_BASE + port * 0x40); + + obj->reg_out = ®->PDOR; + obj->reg_in = ®->PDIR; + obj->reg_dir = ®->PDDR; + + uint32_t i; + // The function is set per pin: reuse gpio logic + for (i=0; i<32; i++) { + if (obj->mask & (1<<i)) { + gpio_set(port_pin(obj->port, i)); + } + } + + port_dir(obj, dir); +} + +void port_mode(port_t *obj, PinMode mode) { + uint32_t i; + // The mode is set per pin: reuse pinmap logic + for (i=0; i<32; i++) { + if (obj->mask & (1<<i)) { + pin_mode(port_pin(obj->port, i), mode); + } + } +} + +void port_dir(port_t *obj, PinDirection dir) { + switch (dir) { + case PIN_INPUT : *obj->reg_dir &= ~obj->mask; break; + case PIN_OUTPUT: *obj->reg_dir |= obj->mask; break; + } +} + +void port_write(port_t *obj, int value) { + *obj->reg_out = (*obj->reg_in & ~obj->mask) | (value & obj->mask); +} + +int port_read(port_t *obj) { + return (*obj->reg_in & obj->mask); +}