minicube.net .
Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of
mbed-src
by 
mbed official
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。（2013/10/28）
パスが通ってないだけのようなのでファイルを以下に移動する。
| mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
| TOOLCHAIN_ARM_MICRO |
をフォルダごと
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
| mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
 |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
Last commit 27 Oct 2013 by 
minicube.net .
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
| Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: common/BusInOut.cpp
- Revision:
- 10:3bc89ef62ce7
- Parent:
- 9:0ce32e54c9a7
- Child:
- 13:0645d8841f51
--- a/common/BusInOut.cpp Mon Jun 10 16:03:00 2013 +0100
+++ b/common/BusInOut.cpp Fri Jun 14 17:49:17 2013 +0100
@@ -1,100 +1,100 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "BusInOut.h"
-
-namespace mbed {
-
-BusInOut::BusInOut(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
- PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
-
- for (int i=0; i<16; i++) {
- _pin[i] = (pins[i] != NC) ? new DigitalInOut(pins[i]) : 0;
- }
-}
-
-BusInOut::BusInOut(PinName pins[16]) {
- for (int i=0; i<16; i++) {
- _pin[i] = (pins[i] != NC) ? new DigitalInOut(pins[i]) : 0;
- }
-}
-
-BusInOut::~BusInOut() {
- for (int i=0; i<16; i++) {
- if (_pin[i] != 0) {
- delete _pin[i];
- }
- }
-}
-
-void BusInOut::write(int value) {
- for (int i=0; i<16; i++) {
- if (_pin[i] != 0) {
- _pin[i]->write((value >> i) & 1);
- }
- }
-}
-
-int BusInOut::read() {
- int v = 0;
- for (int i=0; i<16; i++) {
- if (_pin[i] != 0) {
- v |= _pin[i]->read() << i;
- }
- }
- return v;
-}
-
-void BusInOut::output() {
- for (int i=0; i<16; i++) {
- if (_pin[i] != 0) {
- _pin[i]->output();
- }
- }
-}
-
-void BusInOut::input() {
- for (int i=0; i<16; i++) {
- if (_pin[i] != 0) {
- _pin[i]->input();
- }
- }
-}
-
-void BusInOut::mode(PinMode pull) {
- for (int i=0; i<16; i++) {
- if (_pin[i] != 0) {
- _pin[i]->mode(pull);
- }
- }
-}
-
-#ifdef MBED_OPERATORS
-BusInOut& BusInOut::operator= (int v) {
- write(v);
- return *this;
-}
-
-BusInOut& BusInOut::operator= (BusInOut& rhs) {
- write(rhs.read());
- return *this;
-}
-
-BusInOut::operator int() {
- return read();
-}
-#endif
-
-} // namespace mbed
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusInOut.h"
+
+namespace mbed {
+
+BusInOut::BusInOut(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+ PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalInOut(pins[i]) : 0;
+ }
+}
+
+BusInOut::BusInOut(PinName pins[16]) {
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalInOut(pins[i]) : 0;
+ }
+}
+
+BusInOut::~BusInOut() {
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ delete _pin[i];
+ }
+ }
+}
+
+void BusInOut::write(int value) {
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->write((value >> i) & 1);
+ }
+ }
+}
+
+int BusInOut::read() {
+ int v = 0;
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ v |= _pin[i]->read() << i;
+ }
+ }
+ return v;
+}
+
+void BusInOut::output() {
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->output();
+ }
+ }
+}
+
+void BusInOut::input() {
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->input();
+ }
+ }
+}
+
+void BusInOut::mode(PinMode pull) {
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ _pin[i]->mode(pull);
+ }
+ }
+}
+
+#ifdef MBED_OPERATORS
+BusInOut& BusInOut::operator= (int v) {
+ write(v);
+ return *this;
+}
+
+BusInOut& BusInOut::operator= (BusInOut& rhs) {
+ write(rhs.read());
+ return *this;
+}
+
+BusInOut::operator int() {
+ return read();
+}
+#endif
+
+} // namespace mbed