Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
![]() |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_Freescale/TARGET_KL25Z/us_ticker.c
- Revision:
- 13:0645d8841f51
- Parent:
- 10:3bc89ef62ce7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_Freescale/TARGET_KL25Z/us_ticker.c Mon Aug 05 14:12:34 2013 +0300 @@ -0,0 +1,146 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include <stddef.h> +#include "us_ticker_api.h" +#include "PeripheralNames.h" + +static void pit_init(void); +static void lptmr_init(void); + +static int us_ticker_inited = 0; + +void us_ticker_init(void) { + if (us_ticker_inited) return; + us_ticker_inited = 1; + + pit_init(); + lptmr_init(); +} + +/****************************************************************************** + * Timer for us timing. + ******************************************************************************/ +static void pit_init(void) { + SIM->SCGC6 |= SIM_SCGC6_PIT_MASK; // Clock PIT + PIT->MCR = 0; // Enable PIT + + // Channel 1 + PIT->CHANNEL[1].LDVAL = 0xFFFFFFFF; + PIT->CHANNEL[1].TCTRL = PIT_TCTRL_CHN_MASK; // Chain to timer 0, disable Interrupts + PIT->CHANNEL[1].TCTRL |= PIT_TCTRL_TEN_MASK; // Start timer 1 + + // Use channel 0 as a prescaler for channel 1 + PIT->CHANNEL[0].LDVAL = 23; + PIT->CHANNEL[0].TCTRL = PIT_TCTRL_TEN_MASK; // Start timer 0, disable interrupts +} + +uint32_t us_ticker_read() { + if (!us_ticker_inited) + us_ticker_init(); + + // The PIT is a countdown timer + return ~(PIT->CHANNEL[1].CVAL); +} + +/****************************************************************************** + * Timer Event + * + * It schedules interrupts at given (32bit)us interval of time. + * It is implemented used the 16bit Low Power Timer that remains powered in all + * power modes. + ******************************************************************************/ +static void lptmr_isr(void); + +static void lptmr_init(void) { + /* Clock the timer */ + SIM->SCGC5 |= SIM_SCGC5_LPTMR_MASK; + + /* Reset */ + LPTMR0->CSR = 0; + + /* Set interrupt handler */ + NVIC_SetVector(LPTimer_IRQn, (uint32_t)lptmr_isr); + NVIC_EnableIRQ(LPTimer_IRQn); + + /* Clock at (1)MHz -> (1)tick/us */ + LPTMR0->PSR = LPTMR_PSR_PCS(3); // OSCERCLK -> 8MHz + LPTMR0->PSR |= LPTMR_PSR_PRESCALE(2); // divide by 8 +} + +void us_ticker_disable_interrupt(void) { + LPTMR0->CSR &= ~LPTMR_CSR_TIE_MASK; +} + +void us_ticker_clear_interrupt(void) { + // we already clear interrupt in lptmr_isr +} + +static uint32_t us_ticker_int_counter = 0; +static uint16_t us_ticker_int_remainder = 0; + +static void lptmr_set(unsigned short count) { + /* Reset */ + LPTMR0->CSR = 0; + + /* Set the compare register */ + LPTMR0->CMR = count; + + /* Enable interrupt */ + LPTMR0->CSR |= LPTMR_CSR_TIE_MASK; + + /* Start the timer */ + LPTMR0->CSR |= LPTMR_CSR_TEN_MASK; +} + +static void lptmr_isr(void) { + // write 1 to TCF to clear the LPT timer compare flag + LPTMR0->CSR |= LPTMR_CSR_TCF_MASK; + + if (us_ticker_int_counter > 0) { + lptmr_set(0xFFFF); + us_ticker_int_counter--; + + } else { + if (us_ticker_int_remainder > 0) { + lptmr_set(us_ticker_int_remainder); + us_ticker_int_remainder = 0; + + } else { + // This function is going to disable the interrupts if there are + // no other events in the queue + us_ticker_irq_handler(); + } + } +} + +void us_ticker_set_interrupt(unsigned int timestamp) { + int delta = (int)(timestamp - us_ticker_read()); + if (delta <= 0) { + // This event was in the past: + us_ticker_irq_handler(); + return; + } + + us_ticker_int_counter = (uint32_t)(delta >> 16); + us_ticker_int_remainder = (uint16_t)(0xFFFF & delta); + if (us_ticker_int_counter > 0) { + lptmr_set(0xFFFF); + us_ticker_int_counter--; + } else { + lptmr_set(us_ticker_int_remainder); + us_ticker_int_remainder = 0; + } +}