Diff: main.cpp

Revision:

0:f54d103ce9b6

diff -r 000000000000 -r f54d103ce9b6 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri Mar 24 06:28:11 2017 +0000
@@ -0,0 +1,158 @@
+#include "mbed.h"
+#include "mDot.h"
+#include "MTSLog.h"
+#include <string>
+#include <vector>
+#include <algorithm>
+
+// these options must match the settings on your Conduit
+// uncomment the following lines and edit their values to match your configuration
+static std::string config_network_name = "wonjun123";
+static std::string config_network_pass = "123123123";
+static uint8_t config_frequency_sub_band = 7;
+
+//             r0   r1   r2   r3   c0   c1   c2   c3
+//Keypad keypad(p17, p16, p15, p14, p13, p12, p11, p10);
+
+float speed = 5.1;  // km/h
+bool isIncreasing = false;
+bool isDecreasing = false;
+
+// Callback funciton of speed increasing button pressing
+void cbIncreaseSpeed()
+{
+    speed = speed + 0.1f;
+    if (speed > 19) speed = 19;
+}
+// Callback funciton of speed decreasing button pressing
+void cbDecreaseSpeed()
+{
+    speed = speed - 0.1f;
+    if (speed < 0 ) speed = 0;
+}
+
+int main() {
+    int32_t ret;
+    mDot* dot;
+    //std::vector<uint8_t> data;
+    std::string data_str = "data!";
+    
+    InterruptIn incBtn(PA_2);    // increase speed button
+    InterruptIn decBtn(PA_0);    // decrease speed button
+
+    decBtn.rise(&cbIncreaseSpeed);
+    //decBtn.fall(&cbDecreaseSpeed);
+    
+    // get a mDot handle
+    dot = mDot::getInstance();
+    
+    // print library version information
+    logError("dafdfadafdfdaf");
+    logInfo("version: %s", dot->getId().c_str());
+
+    //*******************************************
+    // configuration
+    //*******************************************
+    // reset to default config so we know what state we're in
+    dot->resetConfig();
+    
+    dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
+
+    // set up the mDot with our network information: frequency sub band, network name, and network password
+    // these can all be saved in NVM so they don't need to be set every time - see mDot::saveConfig()
+    
+    // frequency sub band is only applicable in the 915 (US) frequency band
+    // if using a MultiTech Conduit gateway, use the same sub band as your Conduit (1-8) - the mDot will use the 8 channels in that sub band
+    // if using a gateway that supports all 64 channels, use sub band 0 - the mDot will use all 64 channels
+    logInfo("setting frequency sub band");
+    if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) {
+        logError("failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }
+    
+    logInfo("setting network name");
+    if ((ret = dot->setNetworkName(config_network_name)) != mDot::MDOT_OK) {
+        logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }
+    
+    logInfo("setting network password");
+    if ((ret = dot->setNetworkPassphrase(config_network_pass)) != mDot::MDOT_OK) {
+        logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }
+    
+    // a higher spreading factor allows for longer range but lower throughput
+    // in the 915 (US) frequency band, spreading factors 7 - 10 are available
+    // in the 868 (EU) frequency band, spreading factors 7 - 12 are available
+    logInfo("setting TX spreading factor");
+    if ((ret = dot->setTxDataRate(mDot::SF_10)) != mDot::MDOT_OK) {
+        logError("failed to set TX datarate %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }
+    
+    // request receive confirmation of packets from the gateway
+    logInfo("enabling ACKs");
+    if ((ret = dot->setAck(1)) != mDot::MDOT_OK) {
+        logError("failed to enable ACKs %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }
+    
+    // set join mode to AUTO_OTA so the mDot doesn't have to rejoin after sleeping
+    logInfo("setting join mode to AUTO_OTA");
+    if ((ret = dot->setJoinMode(mDot::AUTO_OTA)) != mDot::MDOT_OK) {
+        logError("failed to set join mode %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    }
+    
+    // save this configuration to the mDot's NVM
+    logInfo("saving config");
+    if (! dot->saveConfig()) {
+        logError("failed to save configuration");
+    }
+    //*******************************************
+    // end of configuration
+    //*******************************************
+
+    // format data for sending to the gateway
+    //for (std::string::iterator it = data_str.begin(); it != data_str.end(); it++)
+        //data.push_back((uint8_t) *it);
+
+    // join the network if not joined
+    if (!dot->getNetworkJoinStatus()) {
+        logInfo("network not joined, joining network");
+        if ((ret = dot->joinNetwork()) != mDot::MDOT_OK) {
+            logError("failed to join network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+        }
+    }
+    
+    while (true) {
+        std::vector<uint8_t> data;
+        
+        float tmpSpeed = speed;
+        if (tmpSpeed >= 10) {  // 10 - 19 km/h
+            data.push_back('1');
+            tmpSpeed -= 10;
+        }
+        tmpSpeed *= 10;
+        data.push_back((int)(tmpSpeed) / 10 + '0');
+        data.push_back('.');
+        data.push_back((int)tmpSpeed % 10 + '0');
+        
+        if (dot->getNetworkJoinStatus()) {
+            // send the data
+            // ACKs are enabled by default, so we're expecting to get one back
+            if ((ret = dot->send(data)) != mDot::MDOT_OK) {
+                logError("failed to send %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+            } else {
+                logInfo("successfully sent data to gateway");
+            }
+        }
+        //osDelay(std::max((uint32_t)5000, (uint32_t)dot->getNextTxMs()));
+        
+        // in the 868 (EU) frequency band, we need to wait until another channel is available before transmitting again
+        uint32_t sleep_time = std::max((uint32_t)5000, (uint32_t)dot->getNextTxMs()) / 1000;
+        //logInfo("going to sleep...");
+    
+        // go to deepsleep and wake up automatically sleep_time seconds later
+        dot->sleep(sleep_time, mDot::INTERRUPT);
+        
+        //wait(sleep_time);
+    }
+
+    return 0;
+}