first 2016/02 SDFileSystemDMA inherited from Official SDFileSystem.

Dependents:   SDFileSystemDMA-test DmdFullRGB_0_1

Fork of SDFileSystemDMA by mi mi

SDFileSystemDMA is enhanced SDFileSystem library for STM32 micros by using DMA functionality.
Max read transfer rate reaches over 2MByte/sec at 24MHz SPI clock if enough read buffer size is set.
Even though minimum read buffer size (512Byte) is set, read transfer rate will reach over 1MByte/sec at 24MHz SPI Clock.
( but depends on the ability of each SD card)

Test program is here.
https://developer.mbed.org/users/mimi3/code/SDFileSystemDMA-test/

/media/uploads/mimi3/sdfilesystemdma-speed-test3-read-buffer-512byte.png

/media/uploads/mimi3/sdfilesystemdma-speed-test-buffer-vs-spi-clock-nucleo-f411re-96mhz.png

Supported SPI port is shown below table.

(v): Verified. It works well.
(w): Probably it will work well. (not tested)
(c): Only compiled. (not tested)
(f): Over flash.
(r): Only read mode. (when _FS_READONLY==1)
(u) Under construction
(z): Dose not work.

Caution

If your board has SRAM less than or equal to 8KB, the buffer size must be set to 512 Bytes.

Supported Boards:
Cortex-M0

BoardSRAMSPI1SPI2SPI3
NUCLEO-F030R88KB(v)
DISCO-F051R88KB(w)
NUCLEO-F031K64KB(f)
NUCLEO-F042K66KB(r)
NUCLEO-F070RB16KB(w)
NUCLEO-F072RB16KB(w)
NUCLEO-F091RC32KB(c)

Cortex-L0

BoardSRAMSPI1SPI2SPI3
DISCO-L053C88KB(c)
NUCLEO-L053R88KB(c)
NUCLEO-L073RZ20KB(c)

Cortex-M3

BoardSRAMSPI1SPI2SPI3
DISCO-F100RB8KB(v)(v)-
BLUEPILL-F103CB20KB(w)(w)-
NUCLEO-F103RB20KB(v)(v)-
NUCLEO-L152RE80KB(v)(w)-
MOTE-L152RC32KB(w)(w)-

Cortex-M4
F3

BoardSRAMSPI1SPI2SPI3
DISCO-F303VC40KB-(v)(v)
NUCLEO-F303RE64KB(w)(w)(w)
NUCLEO-F302R816KB--(c)
NUCLEO-F303K812KB(c)--
DISCO-F334C812KB(c)--
NUCLEO-F334R812KB(c)--

F4

BoardSPI1SPI2SPI3
ELMO-F411RE(w)-(w)
MTS-MDOT-F411RE(u)-(u)
MTS-DRAGONFLY-F411RE(w)-(w)
NUCLEO-F411RE(v)-(v)
NUCLEO-F401RE(w)-(w)
MTS-MDOT-F405RG(u)-(u)
NUCLEO-F410RB(c)-(c)
NUCLEO-F446RE(c)-(c)
NUCLEO-F429ZI(c)-(c)
B96B-F446VE(c)-(c)
NUCLEO-F446ZE(c)-(c)
DISCO-F429ZI(u)-(u)
DISCO-F469NI(c)-(c)

Information

This library is set to use "short file name" in SDFileSystemDMA/FATFileSystem/ChaN/ffconf.h . ( _USE_LFN=0)
You can change this option to _USE_LFN=1 .

Committer:
mimi3
Date:
Sun Feb 14 13:24:37 2016 +0000
Revision:
14:b26f3b332190
Parent:
12:0ecbad5c828b
Child:
15:4b0ce6f59b8c
so far

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mimi3 4:a6ed1fe0c444 1 syntax: regexp
mimi3 14:b26f3b332190 2 \.hgignore$
mimi3 14:b26f3b332190 3 \.git$
mimi3 14:b26f3b332190 4 \.svn$
mimi3 14:b26f3b332190 5 \.orig$
mimi3 14:b26f3b332190 6 \.msub$
mimi3 14:b26f3b332190 7 \.meta$
mimi3 14:b26f3b332190 8 \.ctags
mimi3 14:b26f3b332190 9 \.uvproj$
mimi3 14:b26f3b332190 10 \.uvopt$
mimi3 14:b26f3b332190 11 \.project$
mimi3 14:b26f3b332190 12 \.cproject$
mimi3 14:b26f3b332190 13 \.launch$
mimi3 14:b26f3b332190 14 \.project$
mimi3 14:b26f3b332190 15 \.cproject$
mimi3 14:b26f3b332190 16 \.launch$
mimi3 14:b26f3b332190 17 Makefile$
mimi3 14:b26f3b332190 18 \.ewp$
mimi3 14:b26f3b332190 19 \.eww$