![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
modification of Andrew Kirkhams MODDMA code to send packets over Ethernet and using multiple ADC channels
Dependencies: EthernetInterface MODDMA mbed-rtos mbed
main.cpp
- Committer:
- michaelcoe
- Date:
- 2014-08-05
- Revision:
- 0:68a1564919d0
File content as of revision 0:68a1564919d0:
/*This code is based off of Andy Kirkham's *work making MODDMA. *http://mbed.org/users/AjK/code/MODDMA/ */ #include "mbed.h" #include "MODDMA.h" #include "string.h" #include "EthernetInterface.h" #define NUM_SAMPLES 1024 #define BYTES_PER_SAMPLE sizeof(uint16_t) / sizeof(char) #define NUM_CHANNELS 4 #define SAMPLE_BUFF_LEN NUM_SAMPLES*NUM_CHANNELS #define SAMPLE_BUFF_BYTES SAMPLE_BUFF_LEN * BYTES_PER_SAMPLE DigitalOut led1(LED1); DigitalOut led2(LED2); MODDMA dma; const int BROADCAST_PORT = 58083; // ISR set's this when transfer complete. bool dmaTransferComplete = false; // Function prototypes for IRQ callbacks. // See definitions following main() below. void TC0_callback(void); void ERR0_callback(void); int main() { //Set up the ethernet to broadcast EthernetInterface eth; eth.init(); //Use DHCP eth.connect(); UDPSocket sock; sock.init(); sock.set_broadcasting(); Endpoint broadcast; broadcast.set_address("255.255.255.255", BROADCAST_PORT); // Create a buffer to hold the ADC samples and clear it. // Note, we are going to sample two ADC inputs so they // end up in this buffer "interleaved". So you will want // a buffer twice this size to a real life given sample // frequency. See the printf() output for details. uint16_t adcInputBuffer[SAMPLE_BUFF_LEN]; memset(adcInputBuffer, 0, SAMPLE_BUFF_BYTES); // We use the ADC irq to trigger DMA and the manual says // that in this case the NVIC for ADC must be disabled. NVIC_DisableIRQ(ADC_IRQn); // Power up the ADC and set PCLK LPC_SC->PCONP |= (1UL << 12); LPC_SC->PCLKSEL0 &= ~(3UL << 24); // PCLK = CCLK/4 96M/4 = 24MHz // Enable the ADC, 12MHz, ADC0.0 & .1 //LPC_ADC->ADCR = (1UL << 21) | (1UL << 8) | (3UL << 0); LPC_ADC->ADCR = (1UL << 21) | (1UL << 8) | (15UL << 0); // Set the pin functions to ADC LPC_PINCON->PINSEL1 &= ~(3UL << 14); /* P0.23, Mbed p15. */ LPC_PINCON->PINSEL1 |= (1UL << 14); LPC_PINCON->PINSEL1 &= ~(3UL << 16); /* P0.24, Mbed p16. */ LPC_PINCON->PINSEL1 |= (1UL << 16); LPC_PINCON->PINSEL1 &= ~(3UL << 18); /* P0.25, Mbed p17. */ LPC_PINCON->PINSEL1 |= (1UL << 18); LPC_PINCON->PINSEL1 &= ~(3UL << 20); /* P0.26, Mbed p18. */ LPC_PINCON->PINSEL1 |= (1UL << 20); // Prepare an ADC configuration. MODDMA_Config *conf = new MODDMA_Config; conf ->channelNum ( MODDMA::Channel_0 ) ->srcMemAddr ( 0 ) ->dstMemAddr ( (uint32_t)adcInputBuffer ) //NOT a dereference, just storing a 32bit pointer value as int ->transferSize ( SAMPLE_BUFF_LEN ) ->transferType ( MODDMA::p2m ) ->transferWidth ( MODDMA::word ) ->srcConn ( MODDMA::ADC ) ->dstConn ( 0 ) ->dmaLLI ( 0 ) ->attach_tc ( &TC0_callback ) ->attach_err ( &ERR0_callback ) ; // end conf. // Prepare configuration. dma.Setup( conf ); // Enable configuration. dma.Enable( conf ); // Enable ADC irq flag (to DMA). // Note, don't set the individual flags, // just set the global flag. LPC_ADC->ADINTEN = 0x100; // Enable burst mode on inputs 0 and 1. LPC_ADC->ADCR |= (1UL << 16); while (1) { // When transfer complete do this block. if (dmaTransferComplete) { delete conf; // No memory leaks, delete the configuration. dmaTransferComplete = false; } //sock.sendTo(broadcast, out_buffer, sizeof(out_buffer)); sock.sendTo(broadcast, (char*)adcInputBuffer, SAMPLE_BUFF_BYTES); wait(0.25); } } // Configuration callback on TC void TC0_callback(void) { MODDMA_Config *config = dma.getConfig(); // Disbale burst mode and switch off the IRQ flag. LPC_ADC->ADCR &= ~(1UL << 16); LPC_ADC->ADINTEN = 0; // Finish the DMA cycle by shutting down the channel. dma.haltAndWaitChannelComplete( (MODDMA::CHANNELS)config->channelNum()); dma.Disable( (MODDMA::CHANNELS)config->channelNum() ); // Tell main() while(1) loop to print the results. dmaTransferComplete = true; // Switch on LED2 to show transfer complete. led2 = 1; // Clear DMA IRQ flags. if (dma.irqType() == MODDMA::TcIrq) dma.clearTcIrq(); if (dma.irqType() == MODDMA::ErrIrq) dma.clearErrIrq(); } // Configuration callback on Error void ERR0_callback(void) { // Switch off burst conversions. LPC_ADC->ADCR |= ~(1UL << 16); LPC_ADC->ADINTEN = 0; error("Oh no! My Mbed EXPLODED! :( Only kidding, go find the problem"); }