megan gimple / Mbed 2 deprecated OCE360_Final_Project

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   mbed MMA8452Q MS5837 SDFileSystem SCI_SENSOR

main.cpp@39:f2f0308ebecd, 2021-12-09 (annotated)

Committer:
mgimple
Date:
Thu Dec 09 13:14:05 2021 +0000
Revision:
39:f2f0308ebecd
Parent:
38:46975eaa1400
Child:
40:8a37ea9d006d
Part 1 and two work; logs data "data"; error in bluetooth temp

Who changed what in which revision?

UserRevisionLine numberNew contents of line
elizabethtaylor 11:fc58334fd36b 1 //OCE 360 Final Project
elizabethtaylor 11:fc58334fd36b 2 //Annaliese Nardi, Eliza Taylor, Mackenzie Fraser, Megan Gimple
elizabethtaylor 11:fc58334fd36b 3 //Updated Code by Stephen Licht
elizabethtaylor 25:69027120c44f 4 //Description: This code controls the movement of a UAV. Collects pressure, temperaure, light, and acceleration data and writes that to a file on an onboard SD card.
elizabethtaylor 11:fc58334fd36b 5
slicht_instructor 0:6e97f9a6aca0 6 #include "mbed.h"
slicht_instructor 0:6e97f9a6aca0 7 #include "MMA8452Q.h" //accelerometer library
slicht_instructor 0:6e97f9a6aca0 8 #include "MS5837.h" //pressure sensor library***
mgimple 1:e1a2b47c3098 9 #include "SCI_SENSOR.h" //science sensor library, photocell, temperature cell
slicht_instructor 0:6e97f9a6aca0 10 #include "SDFileSystem.h" // SD card library
slicht_instructor 0:6e97f9a6aca0 11
slicht_instructor 0:6e97f9a6aca0 12 DigitalOut led1(LED1);
slicht_instructor 0:6e97f9a6aca0 13 DigitalOut led2(LED2);
mgimple 28:55b04fb61809 14 DigitalOut led3(LED3);
slicht_instructor 0:6e97f9a6aca0 15
mgimple 1:e1a2b47c3098 16 Serial pc(USBTX, USBRX); //initial serial
mgimple 1:e1a2b47c3098 17 Serial BLE(p13,p14); //Bluetooth
mgimple 1:e1a2b47c3098 18 MMA8452Q accel(p28,p27,0x1D); //initial accelerometer
mgimple 1:e1a2b47c3098 19 LM19 temp(p19); //temperature sensor
mgimple 1:e1a2b47c3098 20 PhotoCell light(p20); //photocell
slicht_instructor 0:6e97f9a6aca0 21 MS5837 p_sensor(p9, p10, ms5837_addr_no_CS); //pressure sensor
slicht_instructor 0:6e97f9a6aca0 22 PwmOut thruster(p21); //set PWM pin //max 1.3ms min 1.1ms
slicht_instructor 0:6e97f9a6aca0 23 PwmOut thruster2(p22); //set PWM pin
slicht_instructor 0:6e97f9a6aca0 24 SDFileSystem sd(p5, p6, p7, p8, "sd"); // the pinout on the mbed Cool Components workshop board
slicht_instructor 0:6e97f9a6aca0 25
slicht_instructor 0:6e97f9a6aca0 26 //global ticker
slicht_instructor 0:6e97f9a6aca0 27 Ticker log_ticker;
slicht_instructor 0:6e97f9a6aca0 28 Ticker accel_ticker;
mgimple 1:e1a2b47c3098 29
slicht_instructor 0:6e97f9a6aca0 30 // global timer
slicht_instructor 0:6e97f9a6aca0 31 Timer t;
mgimple 20:6fb55c833f9f 32 Timer timer2; //part two timer
slicht_instructor 0:6e97f9a6aca0 33
slicht_instructor 0:6e97f9a6aca0 34 ///File
slicht_instructor 0:6e97f9a6aca0 35 FILE *fp;
slicht_instructor 0:6e97f9a6aca0 36 char fname[100];
slicht_instructor 0:6e97f9a6aca0 37 float PI = 3.14159265358979323846f;
slicht_instructor 0:6e97f9a6aca0 38
slicht_instructor 0:6e97f9a6aca0 39 //float operation parameters
mgimple 1:e1a2b47c3098 40 float target_depth=0; //global target depth default 0
mgimple 1:e1a2b47c3098 41 int yo_num=0; //global yo_num default 0
mgimple 1:e1a2b47c3098 42 float thrust_on_time=0; //global thrust_on time default 0
mgimple 1:e1a2b47c3098 43 float accelData[3]; //global accel data
mgimple 20:6fb55c833f9f 44 float vessel_length=1;
slicht_instructor 0:6e97f9a6aca0 45
slicht_instructor 0:6e97f9a6aca0 46 //functions
slicht_instructor 0:6e97f9a6aca0 47 void welcome();
slicht_instructor 0:6e97f9a6aca0 48 void log_data();
mgimple 4:d87b1e40d419 49
slicht_instructor 0:6e97f9a6aca0 50 //IMU related
slicht_instructor 0:6e97f9a6aca0 51 void accel_update(); //update accelerometer related variables. we use imu_ticker to call this function
mgimple 5:17f2b3e61112 52
mgimple 9:e4e1d5db0c04 53 //Control Parameters
mgimple 34:dd00bd18ead9 54 float tim = 1; //define thruster on time
mgimple 14:ed172dec4022 55 float percent = 1.5; //user defined percent of thrust power
mgimple 9:e4e1d5db0c04 56
slicht_instructor 0:6e97f9a6aca0 57 //Control related functions
slicht_instructor 0:6e97f9a6aca0 58 void thrust_on(float pw, float on_time); //input is pulse width
mgimple 10:b2fe6d1dee81 59 //void thrust_off(float pw, float on_time); // turn off pulse width
mgimple 9:e4e1d5db0c04 60
mgimple 5:17f2b3e61112 61
elizabethtaylor 11:fc58334fd36b 62 //global variables
elizabethtaylor 11:fc58334fd36b 63
elizabethtaylor 11:fc58334fd36b 64
slicht_instructor 0:6e97f9a6aca0 65 //-------------Main functions-----------------------------------------------------------------------------------------
slicht_instructor 0:6e97f9a6aca0 66 int main()
slicht_instructor 0:6e97f9a6aca0 67 {
slicht_instructor 0:6e97f9a6aca0 68 //-----Initialization realted code-------//
mgimple 18:b5f58a274570 69 //inital set the thruster esc to 1ms duty cycle
slicht_instructor 0:6e97f9a6aca0 70 thruster.period(0.002); // 2 ms period
mgimple 18:b5f58a274570 71 thruster.pulsewidth(1.0/1000.000);
mgimple 29:48534309e09d 72 thruster2.period(0.002); // 2 ms period
mgimple 29:48534309e09d 73 thruster2.pulsewidth(1.0/1000.000);
mgimple 18:b5f58a274570 74
slicht_instructor 0:6e97f9a6aca0 75 //Initialize accelerometer:
slicht_instructor 0:6e97f9a6aca0 76 accel.init();
slicht_instructor 0:6e97f9a6aca0 77 led1=1;
mgimple 18:b5f58a274570 78
slicht_instructor 0:6e97f9a6aca0 79 //initialize pressure sensor
slicht_instructor 0:6e97f9a6aca0 80 pc.printf("setting the pressure sensor\r\n");
slicht_instructor 0:6e97f9a6aca0 81 p_sensor.MS5837Reset();
slicht_instructor 0:6e97f9a6aca0 82 p_sensor.MS5837Init();
mgimple 6:5f55105701ac 83 pc.printf("setting the tickers\r\n");
slicht_instructor 0:6e97f9a6aca0 84 t.start();
slicht_instructor 0:6e97f9a6aca0 85 led2=1;
mgimple 31:f62d09120c6a 86 //*****************************************************
mgimple 31:f62d09120c6a 87 //waits until it gets an answer over the Bluetooth link!
mgimple 31:f62d09120c6a 88 welcome(); //prompts user for the logfile name
mgimple 31:f62d09120c6a 89 //********************************************************
mgimple 31:f62d09120c6a 90
mgimple 18:b5f58a274570 91
slicht_instructor 0:6e97f9a6aca0 92 //-----setup ticker-------//
slicht_instructor 0:6e97f9a6aca0 93 //setup ticker to separate log and IMU data update.
slicht_instructor 0:6e97f9a6aca0 94 //so we could have all our control code in the while loop
slicht_instructor 0:6e97f9a6aca0 95 // //log at 2 Hz
mgimple 36:93a04bd48152 96 accel_ticker.attach(&accel_update,0.1); //10Hz
mgimple 35:414778105560 97 log_ticker.attach(&log_data,0.5);
mgimple 31:f62d09120c6a 98 led2=0;
mgimple 28:55b04fb61809 99 led1=0;
mgimple 18:b5f58a274570 100
mgimple 36:93a04bd48152 101 while(1) {
mgimple 36:93a04bd48152 102 //Part One
mgimple 36:93a04bd48152 103 int count=0;
mgimple 36:93a04bd48152 104 while(count<3) {
mgimple 36:93a04bd48152 105 led3=1;
mgimple 36:93a04bd48152 106 count=count+1;
mgimple 36:93a04bd48152 107 float pw=percent;
mgimple 36:93a04bd48152 108 float on_time=tim;
mgimple 36:93a04bd48152 109 thrust_on(pw, on_time); //turn thruster on for 5 seconds
mgimple 36:93a04bd48152 110 wait(1);
mgimple 36:93a04bd48152 111 }
mgimple 18:b5f58a274570 112
mgimple 36:93a04bd48152 113 //Part Two
mgimple 36:93a04bd48152 114 timer2.start();
mgimple 36:93a04bd48152 115 while(1) {
mgimple 36:93a04bd48152 116 led3=0;
mgimple 36:93a04bd48152 117 float current_depth=p_sensor.depth();
mgimple 36:93a04bd48152 118 float pw=percent;
mgimple 36:93a04bd48152 119 float on_time=5;
mgimple 18:b5f58a274570 120
mgimple 36:93a04bd48152 121 if (current_depth-vessel_length<2) {
mgimple 36:93a04bd48152 122 thrust_on(pw,on_time);
mgimple 36:93a04bd48152 123 }
mgimple 36:93a04bd48152 124 if (timer2.read()>10) { //60 because counting in seconds?
mgimple 36:93a04bd48152 125 return 0;
mgimple 36:93a04bd48152 126 }
mgimple 18:b5f58a274570 127 }
mgimple 34:dd00bd18ead9 128
mgimple 18:b5f58a274570 129
mgimple 36:93a04bd48152 130 /*Part Three
mgimple 36:93a04bd48152 131 while(1) {
mgimple 36:93a04bd48152 132 error_deep = 2.5; //deep end of error band 2.5m ?
mgimple 36:93a04bd48152 133 error_shallow = 1.5; //shallow end of error band 1.5m?
slicht_instructor 0:6e97f9a6aca0 134
mgimple 36:93a04bd48152 135 if (current_depth <= error_shallow) { //if float is less than 1.5meters deep
mgimple 36:93a04bd48152 136 thrust_on(pw,on_time); // turn on thruster at set pw and ontime
mgimple 36:93a04bd48152 137 else if (current_depth >= error_deep) //if float is more than 2.5 meters deep
mgimple 36:93a04bd48152 138 wait(1); // do nothing for 1 sec.. float will go up for 1 sec
mgimple 36:93a04bd48152 139 else
mgimple 36:93a04bd48152 140 pw = ; //very low thruster percentage
mgimple 36:93a04bd48152 141 thrust_on(pw,on_time); //run thruster at very low percentage to maintain depth
mgimple 36:93a04bd48152 142 }
mgimple 36:93a04bd48152 143 */
mgimple 36:93a04bd48152 144 }
mgimple 34:dd00bd18ead9 145 }
slicht_instructor 0:6e97f9a6aca0 146
slicht_instructor 0:6e97f9a6aca0 147 //-------------Customized functions---------------------------------------------//----------------------------------------
slicht_instructor 0:6e97f9a6aca0 148 ///-----------Welcome menu---------------------///
mgimple 34:dd00bd18ead9 149 void welcome()
mgimple 34:dd00bd18ead9 150 {
mgimple 34:dd00bd18ead9 151 char buffer[100]= {0};
mgimple 34:dd00bd18ead9 152 int flag=1;
mgimple 34:dd00bd18ead9 153 //Flush the port
mgimple 34:dd00bd18ead9 154 while(BLE.readable()) {
mgimple 34:dd00bd18ead9 155 BLE.getc();
mgimple 34:dd00bd18ead9 156 }
mgimple 34:dd00bd18ead9 157 led1=1;
mgimple 34:dd00bd18ead9 158 while(flag) {
mgimple 34:dd00bd18ead9 159 BLE.printf("### I am alive\r\n");
mgimple 34:dd00bd18ead9 160 BLE.printf("### Please enter the log file name you want\r\n");
mgimple 34:dd00bd18ead9 161 if(BLE.readable()) {
mgimple 34:dd00bd18ead9 162 BLE.scanf("%s",buffer);
mgimple 34:dd00bd18ead9 163 sprintf(fname,"/sd/mydir/%s.txt",buffer); //make file name
slicht_instructor 0:6e97f9a6aca0 164
mgimple 34:dd00bd18ead9 165 flag = 0; //set the flag to 0 to break the while
mgimple 20:6fb55c833f9f 166 }
mgimple 34:dd00bd18ead9 167 wait(1);
mgimple 34:dd00bd18ead9 168 }
mgimple 34:dd00bd18ead9 169 led2=1;
mgimple 34:dd00bd18ead9 170 //print name
mgimple 34:dd00bd18ead9 171 BLE.printf("### name received\r\n");
mgimple 34:dd00bd18ead9 172 BLE.printf("### file name and directory is: \r\n %s\r\n",fname); //file name and location
mgimple 34:dd00bd18ead9 173 //open file test
mgimple 34:dd00bd18ead9 174 mkdir("/sd/mydir",0777); //keep 0777, this is magic #
mgimple 34:dd00bd18ead9 175 fp = fopen(fname, "a");
mgimple 34:dd00bd18ead9 176 if(fp == NULL) {
mgimple 34:dd00bd18ead9 177 BLE.printf("Could not open file for write\n");
mgimple 34:dd00bd18ead9 178 } else {
mgimple 34:dd00bd18ead9 179 BLE.printf("##file open good \n"); //open file and tell if open
mgimple 34:dd00bd18ead9 180 fprintf(fp, "Hello\r\n");
mgimple 34:dd00bd18ead9 181 fclose(fp);
mgimple 20:6fb55c833f9f 182 }
mgimple 20:6fb55c833f9f 183
mgimple 34:dd00bd18ead9 184 BLE.printf("### The main program will start in 5 seconds\r\n");
mgimple 34:dd00bd18ead9 185 wait(5);
mgimple 34:dd00bd18ead9 186 }
mgimple 34:dd00bd18ead9 187
slicht_instructor 0:6e97f9a6aca0 188 ///-----------log functions---------------------///
mgimple 34:dd00bd18ead9 189 void log_data()
mgimple 34:dd00bd18ead9 190 {
mgimple 37:7bb14ad22d78 191
mgimple 34:dd00bd18ead9 192 p_sensor.Barometer_MS5837();
mgimple 34:dd00bd18ead9 193
mgimple 34:dd00bd18ead9 194 //Code from Licht
mgimple 34:dd00bd18ead9 195 //Sample code shows how to read temperature and light data:
mgimple 38:46975eaa1400 196 BLE.printf("Temperature: %f Light: %f\r\n",temp.temp(), light.light());
slicht_instructor 0:6e97f9a6aca0 197
mgimple 34:dd00bd18ead9 198 //Sample code shows how to read pressure sensor
mgimple 39:f2f0308ebecd 199 BLE.printf("Depth: %f Pressure: %f \r\n", p_sensor.depth(), p_sensor.MS5837_Pressure()); //p_sensor.MS5837_Temperature());
mgimple 37:7bb14ad22d78 200 //p_sensor.Barometer_MS5837(); //NOTE: this function prompts the pressure sensor to collect the next data point, so it must be included!
mgimple 34:dd00bd18ead9 201
mgimple 34:dd00bd18ead9 202 //Sample code indicates how to read accelerometer data:
mgimple 39:f2f0308ebecd 203 BLE.printf("Acceleration: %f %f %f\r\n",accelData[0],accelData[1],accelData[2]);
mgimple 34:dd00bd18ead9 204 //end of code from Licht
mgimple 37:7bb14ad22d78 205
mgimple 34:dd00bd18ead9 206 fp = fopen(fname, "a");
mgimple 36:93a04bd48152 207 fprintf(fp, "$DATA");
mgimple 34:dd00bd18ead9 208 // Time:%f, Pressure:%f, Depth:%f, Acceleration:%f, %f, %f, Temp:%f, Light:%f, Percent:%f\r\n", t.read(),p_sensor.MS5837_Pressure(),p_sensor.depth(),accelData[0],accelData[1],accelData[2],temp.temp(),light.light(),percent);
mgimple 34:dd00bd18ead9 209 fclose(fp);
mgimple 34:dd00bd18ead9 210 }
slicht_instructor 0:6e97f9a6aca0 211
slicht_instructor 0:6e97f9a6aca0 212 ///-----------acceleromter related functions---------------------///
mgimple 34:dd00bd18ead9 213 void accel_update()
mgimple 34:dd00bd18ead9 214 {
mgimple 34:dd00bd18ead9 215 accelData[0] = accel.readX();
mgimple 34:dd00bd18ead9 216 accelData[1] = accel.readY();
mgimple 34:dd00bd18ead9 217 accelData[2] = accel.readZ();
mgimple 34:dd00bd18ead9 218 }
slicht_instructor 0:6e97f9a6aca0 219
slicht_instructor 0:6e97f9a6aca0 220 ///-----------Control related functions---------------------///
slicht_instructor 0:6e97f9a6aca0 221 ////Thruster on control, pw->pulse width in milli-second//
slicht_instructor 0:6e97f9a6aca0 222 //// pw range between 1 to 1.5//
slicht_instructor 0:6e97f9a6aca0 223 //// on_time-> thruster on time.
mgimple 34:dd00bd18ead9 224 void thrust_on(float pw, float on_time) //input is pulse width
mgimple 34:dd00bd18ead9 225 {
slicht_instructor 0:6e97f9a6aca0 226
mgimple 34:dd00bd18ead9 227 float pw_max=2.0;
mgimple 34:dd00bd18ead9 228 if(pw>pw_max) {
mgimple 34:dd00bd18ead9 229 pw=pw_max; //hard limitation
mgimple 34:dd00bd18ead9 230 }
mgimple 34:dd00bd18ead9 231 Timer tt;
mgimple 34:dd00bd18ead9 232 tt.reset();
mgimple 34:dd00bd18ead9 233 tt.start();
mgimple 34:dd00bd18ead9 234 // lets set the pulse width
mgimple 34:dd00bd18ead9 235 //thruster.period(20.0/1000.00); // 20 ms period
mgimple 34:dd00bd18ead9 236 thruster.pulsewidth(pw/1000.00);
mgimple 34:dd00bd18ead9 237 thruster2.pulsewidth(pw/1000.00);
mgimple 34:dd00bd18ead9 238 //PWM will be kept until time out
mgimple 34:dd00bd18ead9 239 while(tt.read()<=on_time) {
mgimple 18:b5f58a274570 240
mgimple 34:dd00bd18ead9 241 BLE.printf("thruster on?...mack is cool\r\n"); //print check
mgimple 34:dd00bd18ead9 242 }
mgimple 34:dd00bd18ead9 243 //stop the timer
mgimple 34:dd00bd18ead9 244 tt.stop();
mgimple 34:dd00bd18ead9 245 //turn off the thruster
mgimple 34:dd00bd18ead9 246 thruster.pulsewidth(1.0/1000.00);
mgimple 34:dd00bd18ead9 247 thruster2.pulsewidth(1.0/1000.00);
mgimple 18:b5f58a274570 248
mgimple 34:dd00bd18ead9 249 }