Implementation of 1-Wire with added Alarm Search Functionality
Dependents: Max32630_One_Wire_Interface
Diff: Bridge/DS28E17/DS28E17.h
- Revision:
- 73:2cecc1372acc
- Parent:
- 27:d5aaefa252f1
- Child:
- 74:23be10c32fa3
diff -r 6892702709ee -r 2cecc1372acc Bridge/DS28E17/DS28E17.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Bridge/DS28E17/DS28E17.h Thu May 12 14:38:16 2016 -0500 @@ -0,0 +1,441 @@ +/******************************************************************//** +* Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved. +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included +* in all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES +* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +* OTHER DEALINGS IN THE SOFTWARE. +* +* Except as contained in this notice, the name of Maxim Integrated +* Products, Inc. shall not be used except as stated in the Maxim Integrated +* Products, Inc. Branding Policy. +* +* The mere transfer of this software does not imply any licenses +* of trade secrets, proprietary technology, copyrights, patents, +* trademarks, maskwork rights, or any other form of intellectual +* property whatsoever. Maxim Integrated Products, Inc. retains all +* ownership rights. +**********************************************************************/ + +#ifndef OneWire_Bridge_DS28E17 +#define OneWire_Bridge_DS28E17 + +#include <stdint.h> +#include <stddef.h> +#include "OneWireSlave.h" + +namespace OneWire +{ + namespace Masters { class OneWireMaster; } + + namespace Bridge + { + class DS28E17 : public OneWireSlave + { + public: + + enum DS28E17_CMDS + { + CMD_I2C_WRITE_W_STOP = 0x4B, + CMD_I2C_WRITE_NO_STOP = 0x5A, + CMD_I2C_WRITE_ONLY = 0x69, + CMD_I2C_WRITE_ONLY_W_STOP = 0x78, + CMD_I2C_READ_W_STOP = 0x87, + CMD_I2C_WRITE_READ_W_STOP = 0x2D, + CMD_WRITE_CONFIG_REG = 0xD2, + CMD_READ_CONFIG_REG = 0xE1, + CMD_DISABLE_OW_MODE = 0x96, + CMD_ENABLE_SLEEP_MODE = 0x1E, + CMD_READ_DEVICE_REV = 0xC3 + }; + + enum CmdResult + { + Success, + CommsReadBitError, + CommsWriteBitError, + CommsReadByteError, + CommsWriteByteError, + CommsReadBlockError, + CommsWriteBlockError, + TimeoutError, + OperationFailure + }; + + static const size_t POLL_LIMIT = 10000; + + /**********************************************************//** + * @brief DS28E17 constructor + * + * @details + * + * On Entry: + * @param[in] p_owm - pointer to a 1-wire master of the following + * types; Ds248x, Ds2480b, OwGpio which + * inherit the base class 'OneWireInterface' + * + * On Exit: + * @return + **************************************************************/ + DS28E17(Masters::OneWireMaster &owm); + + /**********************************************************//** + * @brief Write to selected DS28E17's I2C with Stop. + * Poll until I2C write complete and receive status info. + * + * @details Output on I2C: S, Address + Write, Write Data [1-255], P + * + * On Entry: + * @param[in] I2C_addr - + * Writes I2C address. The least significant bit of the I2C + * address is automatically cleared by the command. + * + * @param[in] length + * The number of data bytes to be written ranging from 01h to FFh. + * A value of zero will assert the Error Detected pin (ED). + * + * @param[in] *data + * User defines write data ranging from 1-255 bytes. + * + * On Exit: + * @param[out] status + * Detects the condition of the Start (bit3), N/A (bit2), + * Address(bit1) and CRC16(bit0) bits. + * b3;0=No Err|1=I2CStart prev-not issued, + * b2;0=No Err|1=I2C N/A Err, + * b1;0=No Err|1=Addr Err, + * b0;0=Valid CRC16|1=Invalid CRC16 + * + * @param[out] wr_status + * Indicates which write byte NACK’d. A value of 00h indicates + * all bytes were acknowledged by the slave. + * A non-zero value indicates the byte number that NACK’d. + * + * @return + * true if device selected and written @n + * false if failed device select + **************************************************************/ + CmdResult I2C_WriteDataWithStop(uint8_t I2C_addr, uint8_t length, + uint8_t *data, uint8_t &status, + uint8_t &wr_status); + + /**********************************************************//** + * @brief Write to selected DS28E17's I2C No Stop. + * Poll until I2C write complete and receive status info. + * + * @details Output on I2C: S, Address + Write, Write Data [1-255] + * + * On Entry: + * @param[in] I2C_addr + * Writes I2C address. The least significant bit of the I2C address + * is automatically cleared by the command. + * + * @param[in] length + * The number of data bytes to be written ranging from 01h to FFh. + * A value of zero will assert the Error Detected pin (ED). + * + * @param[in] *data + * User defines write data ranging from 1-255 bytes. + * + * On Exit: + * @param[out] status + * Detects the condition of the Start (bit3), N/A (bit2), + * Address(bit1) and CRC16(bit0) bits. + * b3;0=No Err|1=I2CStart prev-not issued, + * b2;0=No Err|1=I2C N/A Err, + * b1;0=No Err|1=Addr Err, + * b0;0=Valid CRC16|1=Invalid CRC16 + * + * @param[out] wr_status + * Indicates which write byte NACK’d. A value of 00h indicates + * all bytes were acknowledged by the slave. + * A non-zero value indicates the byte number that NACK’d. + * + * @return + * true if device selected and written @n + * false if failed device select + **************************************************************/ + CmdResult I2C_WriteDataNoStop(uint8_t I2C_addr, uint8_t length, + uint8_t *data, uint8_t &status, + uint8_t &wr_status); + + + /**********************************************************//** + * @brief Write to selected DS28E17's I2C with Data only. + * Poll until I2C write complete and receive status info. + * + * @details Output on I2C: Write Data [1-255] + * + * On Entry: + * @param[in] length + * The number of data bytes to be written ranging from 01h to FFh. + * A value of zero will assert the Error Detected pin (ED). + * + * @param[in] *data + * User defines write data ranging from 1-255 bytes. + * + * On Exit: + * @param[out] status + * Detects the condition of the Start (bit3), N/A (bit2), + * Address(bit1) and CRC16(bit0) bits. + * b3;0=No Err|1=I2CStart prev-not issued, + * b2;0=No Err|1=I2C N/A Err, + * b1;0=No Err|1=Addr Err, + * b0;0=Valid CRC16|1=Invalid CRC16 + * + * @param[out] wr_status + * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave. + * A non-zero value indicates the byte number that NACK’d. + * + * @return + * true if device selected and written @n + * false if failed device select + **************************************************************/ + CmdResult I2C_WriteDataOnly(uint8_t length, uint8_t *data, + uint8_t &status, uint8_t &wr_status); + + + /**********************************************************//** + * @brief Write to selected DS28E17's I2C with Stop. + * Poll until I2C write complete and receive status info. + * + * @details Output on I2C: Write Data [1-255], P + * + * On Entry: + * @param[in] length + * The number of data bytes to be written ranging from 01h to FFh. + * A value of zero will assert the Error Detected pin (ED). + * + * @param[in] *data + * User defines write data ranging from 1-255 bytes. + * + * On Exit: + * @param[out] status + * Detects the condition of the Start (bit3), N/A (bit2), + * Address(bit1) and CRC16(bit0) bits. + * b3;0=No Err|1=I2CStart prev-not issued, + * b2;0=No Err|1=I2C N/A Err, + * b1;0=No Err|1=Addr Err, + * b0;0=Valid CRC16|1=Invalid CRC16 + * + * @param[out] wr_status + * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave. + * A non-zero value indicates the byte number that NACK’d. + * + * @return + * true if device selected and written @n + * false if failed device select + **************************************************************/ + CmdResult I2C_WriteDataOnlyWithStop(uint8_t length, uint8_t *data, + uint8_t &status, uint8_t &wr_status); + + + /**********************************************************//** + * @brief Write to selected DS28E17's I2C with Stop and poll until I2C write complete + * receive status info, and read data with a stop at the end. + * + * @details Output on I2C: + * S, Slave Address + Write, Write Data [1-255], + * Sr, Address + Read, Read Data [1-255], P (NACK last read byte) + * + * On Entry: + * @param[in] I2C_addr + * Writes I2C address. The least significant bit of the I2C address + * is automatically cleared by the command. + * + * @param[in] length + * The number of data bytes to be written ranging from 01h to FFh. + * A value of zero will assert the Error Detected pin (ED). + * + * @param[in] *data + * User defines write data ranging from 1-255 bytes. + * + * @param[in] nu_bytes_read + * Number of I2C bytes to read. A value of zero will assert the Error Detected pin (ED). + * + * On Exit: + * @param[out] status + * Detects the condition of the Start (bit3), N/A (bit2), + * Address(bit1) and CRC16(bit0) bits. + * b3;0=No Err|1=I2CStart prev-not issued, + * b2;0=No Err|1=I2C N/A Err, + * b1;0=No Err|1=Addr Err, + * b0;0=Valid CRC16|1=Invalid CRC16 + * + * @param[out] wr_status + * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave. + * A non-zero value indicates the byte number that NACK’d. + * + * @param[out] *read_data + * Array of read data received from I2C. + * + * @return + * true if device selected, written and read @n + * false if failed device select or timeout occurred or CRC16 error + **************************************************************/ + CmdResult I2C_WriteReadDataWithStop(uint8_t I2C_addr, uint8_t length, + uint8_t *data, uint8_t nu_bytes_read, + uint8_t &status, uint8_t &wr_status, + uint8_t *read_data); + + + /**********************************************************//** + * @brief Selected DS28E17's and send I2C address and poll until + * I2C read address complete, receive status info, and read data + * with a stop at the end. + * + * @details Output on I2C: + * S, Slave Address + Read, Read Data [1-255], P (NACK last read byte) + * + * On Entry: + * @param[in] I2C_addr + * Writes I2C address. The least significant bit of the I2C address + * is automatically cleared by the command. + * + * On Exit: + * @param[out] nu_bytes_read + * Number of I2C bytes to read. A value of zero will assert the Error Detected pin (ED). + * + * @param[out] status + * Detects the condition of the Start (bit3), N/A (bit2), + * Address(bit1) and CRC16(bit0) bits. + * b3;0=No Err|1=I2CStart prev-not issued, + * b2;0=No Err|1=I2C N/A Err, + * b1;0=No Err|1=Addr Err, + * b0;0=Valid CRC16|1=Invalid CRC16 + * + * @param[out] *read_data + * Array of read data received from I2C. + * + * @return + * true if device selected, written and read @n + * false if failed device select or timeout occurred or CRC16 error + **************************************************************/ + CmdResult I2C_ReadDataWithStop(uint8_t I2C_addr, uint8_t nu_bytes_read, + uint8_t &status, uint8_t *read_data); + + + /**********************************************************//** + * @brief Write to Configuration Register of DS28E17. + * + * @details + * + * On Entry: + * @param[in] data + * sent to configuration register + * + * On Exit: + * + * @return + * true if device selected and written @n + * false if failed device select + **************************************************************/ + CmdResult WriteConfigReg(uint8_t data); + + + /**********************************************************//** + * @brief Read the Configuration Register of DS28E17. + * + * @details + * + * On Entry: + * + * On Exit: + * + * @return + * true if device selected and read correctly @n + * false if failed device select + **************************************************************/ + CmdResult ReadConfigReg(uint8_t & config); + + + /**********************************************************//** + * @brief Disable 1-Wire Mode DS28E17 and activates the input detection pin. + * Immediately after the command, all 1-Wire signaling will be ignored + * until the 1W_DET pin is high for more than 3ms. + * + * @details + * + * On Entry: + * + * On Exit: + * + * @return + * true if device selected and written @n + * false if failed device select + **************************************************************/ + CmdResult DisableOWMode(); + + + /**********************************************************//** + * @brief The Enable Sleep Mode command puts the device into a low current mode. + * All 1-Wire communication is ignored until woken up. Immediately after + * the command, the device monitors the WAKEUP input pin and + * exits sleep mode on a rising edge. + * + * @details + * + * On Entry: + * + * On Exit: + * + * @return + * true if device selected and written @n + * false if failed device select* + **************************************************************/ + CmdResult EnableSleepMode(); + + + /**********************************************************//** + * @brief Read the Device Revision of DS28E17. The revision value + * should never be zero. The upper nibble is the major revision + * and the lower nibble is the minor revision. + * + * @details + * + * On Entry: + * + * On Exit: + * + * @return + * revision value if device selected and read correctly @n + * false if failed device select (i.e. 00h) + **************************************************************/ + CmdResult ReadDeviceRevision(uint8_t & rev); + + private: + + CmdResult send_packet(const uint8_t * data, uint8_t data_length, + uint8_t & status, uint8_t & wr_status); + + //overloaded function for I2C read only command + CmdResult send_packet(const uint8_t * data, uint8_t data_length, + uint8_t & status); + + Masters::OneWireMaster &_owm; + + uint16_t _crc16; + uint8_t _i2c_speed; + + static const uint16_t _oddparity[16]; + + uint16_t docrc16(uint16_t data); + }; + } +} + +#endif /*DS28E17_H*/ +