File content as of revision 75:8b627804927c:

/******************************************************************//**
* Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Except as contained in this notice, the name of Maxim Integrated
* Products, Inc. shall not be used except as stated in the Maxim Integrated
* Products, Inc. Branding Policy.
*
* The mere transfer of this software does not imply any licenses
* of trade secrets, proprietary technology, copyrights, patents,
* trademarks, maskwork rights, or any other form of intellectual
* property whatsoever. Maxim Integrated Products, Inc. retains all
* ownership rights.
**********************************************************************/

#ifndef OneWire_Bridge_DS28E17
#define OneWire_Bridge_DS28E17

#include <stdint.h>
#include <stddef.h>
#include "OneWireSlave.h"

namespace OneWire
{
    namespace Masters { class OneWireMaster; }

    namespace Bridge
    {
        class DS28E17 : public OneWireSlave
        {
        public:
            enum CmdResult
            {
                Success,
                CommsReadBitError,
                CommsWriteBitError,
                CommsReadByteError,
                CommsWriteByteError,
                CommsReadBlockError,
                CommsWriteBlockError,
                TimeoutError,
                OperationFailure
            };

            /**********************************************************//**
            * @brief DS28E17 constructor
            *
            * @details
            *
            * On Entry:
            *     @param[in] p_owm - pointer to a 1-wire master of the following
            *                        types; Ds248x, Ds2480b, OwGpio which
            *                        inherit the base class 'OneWireInterface'
            *
            * On Exit:
            *    @return
            **************************************************************/
            DS28E17(Masters::OneWireMaster &owm);

            /**********************************************************//**
            * @brief Write to selected DS28E17's I2C with Stop.
            * Poll until I2C write complete and receive status info.
            *
            * @details Output on I2C: S, Address + Write, Write Data [1-255], P
            *
            * On Entry:
            * @param[in]  I2C_addr -
            * Writes I2C address. The least significant bit of the I2C
            * address is automatically cleared by the command.
            *
            * @param[in] length
            * The number of data bytes to be written ranging from 01h to FFh.
            * A value of zero will assert the Error Detected pin (ED).
            *
            * @param[in] *data
            * User defines write data ranging from 1-255 bytes.
            *
            * On Exit:
            * @param[out] status
            * Detects the condition of the Start (bit3), N/A (bit2),
            * Address(bit1) and CRC16(bit0) bits.
            * b3;0=No Err|1=I2CStart prev-not issued,
            * b2;0=No Err|1=I2C N/A Err,
            * b1;0=No Err|1=Addr Err,
            * b0;0=Valid CRC16|1=Invalid CRC16
            *
            * @param[out] wr_status
            * Indicates which write byte NACK’d. A value of 00h indicates
            * all bytes were acknowledged by the slave.
            * A non-zero value indicates the byte number that NACK’d.
            *
            * @return
            * true if device selected and written @n
            * false if failed device select
            **************************************************************/
            CmdResult I2C_WriteDataWithStop(uint8_t I2C_addr, uint8_t length,
                                            uint8_t *data, uint8_t &status,
                                            uint8_t &wr_status);

            /**********************************************************//**
            * @brief Write to selected DS28E17's I2C No Stop.
            * Poll until I2C write complete and receive status info.
            *
            * @details Output on I2C: S, Address + Write, Write Data [1-255]
            *
            * On Entry:
            * @param[in]  I2C_addr
            * Writes I2C address. The least significant bit of the I2C address
            * is automatically cleared by the command.
            *
            * @param[in]  length
            * The number of data bytes to be written ranging from 01h to FFh.
            * A value of zero will assert the Error Detected pin (ED).
            *
            * @param[in]  *data
            * User defines write data ranging from 1-255 bytes.
            *
            * On Exit:
            * @param[out]  status
            * Detects the condition of the Start (bit3), N/A (bit2),
            * Address(bit1) and CRC16(bit0) bits.
            * b3;0=No Err|1=I2CStart prev-not issued,
            * b2;0=No Err|1=I2C N/A Err,
            * b1;0=No Err|1=Addr Err,
            * b0;0=Valid CRC16|1=Invalid CRC16
            *
            * @param[out] wr_status
            * Indicates which write byte NACK’d. A value of 00h indicates
            * all bytes were acknowledged by the slave.
            * A non-zero value indicates the byte number that NACK’d.
            *
            * @return
            * true if device selected and written @n
            * false if failed device select
            **************************************************************/
            CmdResult I2C_WriteDataNoStop(uint8_t I2C_addr, uint8_t length,
                                          uint8_t *data, uint8_t &status,
                                          uint8_t &wr_status);


            /**********************************************************//**
            * @brief Write to selected DS28E17's I2C with Data only.
            * Poll until I2C write complete and receive status info.
            *
            * @details Output on I2C: Write Data [1-255]
            *
            * On Entry:
            * @param[in]  length
            * The number of data bytes to be written ranging from 01h to FFh.
            * A value of zero will assert the Error Detected pin (ED).
            *
            * @param[in]  *data
            * User defines write data ranging from 1-255 bytes.
            *
            * On Exit:
            * @param[out]  status
            * Detects the condition of the Start (bit3), N/A (bit2),
            * Address(bit1) and CRC16(bit0) bits.
            * b3;0=No Err|1=I2CStart prev-not issued,
            * b2;0=No Err|1=I2C N/A Err,
            * b1;0=No Err|1=Addr Err,
            * b0;0=Valid CRC16|1=Invalid CRC16
            *
            * @param[out] wr_status
            * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave.
            * A non-zero value indicates the byte number that NACK’d.
            *
            * @return
            * true if device selected and written @n
            * false if failed device select
            **************************************************************/
            CmdResult I2C_WriteDataOnly(uint8_t length, uint8_t *data,
                                        uint8_t &status, uint8_t &wr_status);


            /**********************************************************//**
            * @brief Write to selected DS28E17's I2C with Stop.
            * Poll until I2C write complete and receive status info.
            *
            * @details Output on I2C: Write Data [1-255], P
            *
            * On Entry:
            * @param[in]  length
            * The number of data bytes to be written ranging from 01h to FFh.
            * A value of zero will assert the Error Detected pin (ED).
            *
            * @param[in]  *data
            * User defines write data ranging from 1-255 bytes.
            *
            * On Exit:
            * @param[out]  status
            * Detects the condition of the Start (bit3), N/A (bit2),
            * Address(bit1) and CRC16(bit0) bits.
            * b3;0=No Err|1=I2CStart prev-not issued,
            * b2;0=No Err|1=I2C N/A Err,
            * b1;0=No Err|1=Addr Err,
            * b0;0=Valid CRC16|1=Invalid CRC16
            *
            * @param[out] wr_status
            * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave.
            * A non-zero value indicates the byte number that NACK’d.
            *
            * @return
            * true if device selected and written @n
            * false if failed device select
            **************************************************************/
            CmdResult I2C_WriteDataOnlyWithStop(uint8_t length, uint8_t *data,
                                                uint8_t &status, uint8_t &wr_status);


            /**********************************************************//**
            * @brief Write to selected DS28E17's I2C with Stop and poll until I2C write complete
            * receive status info, and read data with a stop at the end.
            *
            * @details Output on I2C:
            * S, Slave Address + Write, Write Data [1-255],
            * Sr, Address + Read, Read Data [1-255], P (NACK last read byte)
            *
            * On Entry:
            * @param[in]  I2C_addr
            * Writes I2C address. The least significant bit of the I2C address
            * is automatically cleared by the command.
            *
            * @param[in]  length
            * The number of data bytes to be written ranging from 01h to FFh.
            * A value of zero will assert the Error Detected pin (ED).
            *
            * @param[in]  *data
            * User defines write data ranging from 1-255 bytes.
            *
            * @param[in] nu_bytes_read
            * Number of I2C bytes to read. A value of zero will assert the Error Detected pin (ED).
            *
            * On Exit:
            * @param[out]  status
            * Detects the condition of the Start (bit3), N/A (bit2),
            * Address(bit1) and CRC16(bit0) bits.
            * b3;0=No Err|1=I2CStart prev-not issued,
            * b2;0=No Err|1=I2C N/A Err,
            * b1;0=No Err|1=Addr Err,
            * b0;0=Valid CRC16|1=Invalid CRC16
            *
            * @param[out] wr_status
            * Indicates which write byte NACK’d. A value of 00h indicates all bytes were acknowledged by the slave.
            * A non-zero value indicates the byte number that NACK’d.
            *
            * @param[out] *read_data
            * Array of read data received from I2C.
            *
            * @return
            * true if device selected, written and read @n
            * false if failed device select or timeout occurred or CRC16 error
            **************************************************************/
            CmdResult I2C_WriteReadDataWithStop(uint8_t I2C_addr, uint8_t length,
                                                uint8_t *data, uint8_t nu_bytes_read,
                                                uint8_t &status, uint8_t &wr_status,
                                                uint8_t *read_data);


            /**********************************************************//**
            * @brief Selected DS28E17's and send I2C address and poll until
            * I2C read address complete, receive status info, and read data
            * with a stop at the end.
            *
            * @details Output on I2C:
            * S, Slave Address + Read, Read Data [1-255], P (NACK last read byte)
            *
            * On Entry:
            * @param[in]  I2C_addr
            * Writes I2C address. The least significant bit of the I2C address
            * is automatically cleared by the command.
            *
            * On Exit:
            * @param[out] nu_bytes_read
            * Number of I2C bytes to read. A value of zero will assert the Error Detected pin (ED).
            *
            * @param[out]  status
            * Detects the condition of the Start (bit3), N/A (bit2),
            * Address(bit1) and CRC16(bit0) bits.
            * b3;0=No Err|1=I2CStart prev-not issued,
            * b2;0=No Err|1=I2C N/A Err,
            * b1;0=No Err|1=Addr Err,
            * b0;0=Valid CRC16|1=Invalid CRC16
            *
            * @param[out] *read_data
            * Array of read data received from I2C.
            *
            * @return
            * true if device selected, written and read @n
            * false if failed device select or timeout occurred or CRC16 error
            **************************************************************/
            CmdResult I2C_ReadDataWithStop(uint8_t I2C_addr, uint8_t nu_bytes_read,
                                           uint8_t &status, uint8_t *read_data);


            /**********************************************************//**
            * @brief Write to Configuration Register of DS28E17.
            *
            * @details
            *
            * On Entry:
            * @param[in] data
            * sent to configuration register
            *
            * On Exit:
            *
            * @return
            * true if device selected and written @n
            * false if failed device select
            **************************************************************/
            CmdResult WriteConfigReg(uint8_t data);


            /**********************************************************//**
            * @brief Read the Configuration Register of DS28E17.
            *
            * @details
            *
            * On Entry:
            *
            * On Exit:
            *
            * @return
            * true if device selected and read correctly @n
            * false if failed device select
            **************************************************************/
            CmdResult ReadConfigReg(uint8_t & config);


            /**********************************************************//**
            * @brief The Enable Sleep Mode command puts the device into a low current mode.
            * All 1-Wire communication is ignored until woken up. Immediately after
            * the command, the device monitors the WAKEUP input pin and
            * exits sleep mode on a rising edge.
            *
            * @details
            *
            * On Entry:
            *
            * On Exit:
            *
            * @return
            * true if device selected and written @n
            * false if failed device select*
            **************************************************************/
            CmdResult EnableSleepMode();


            /**********************************************************//**
            * @brief Read the Device Revision of DS28E17. The revision value
            *  should never be zero.  The upper nibble is the major revision
            *  and the lower nibble is the minor revision.
            *
            * @details
            *
            * On Entry:
            *
            * On Exit:
            *
            * @return
            * revision value if device selected and read correctly @n
            * false if failed device select (i.e. 00h)
            **************************************************************/
            CmdResult ReadDeviceRevision(uint8_t & rev);

        private:

            CmdResult send_packet(const uint8_t * data, uint8_t data_length,
                                  uint8_t & status, uint8_t & wr_status);

            //overloaded function for I2C read only command 
            CmdResult send_packet(const uint8_t * data, uint8_t data_length,
                                  uint8_t & status);

            Masters::OneWireMaster &_owm;

            uint16_t _crc16;
            uint8_t _i2c_speed;

            static const size_t pollLimit = 10000;
            static const uint16_t _oddparity[16];

            uint16_t docrc16(uint16_t data);
        };
    }
}

#endif