Diff: modem/modem.h

Revision:

0:214db1fdfc95

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/modem/modem.h	Fri Jun 12 10:07:59 2015 +0000
@@ -0,0 +1,128 @@
+/*
+  modem.h
+  2014 Copyright (c) Seeed Technology Inc.  All right reserved.
+
+  Author:lawliet zou(lawliet.zou@gmail.com)
+  2014-2-24
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef __MODEM_H__
+#define __MODEM_H__
+
+#include "mbed.h"
+
+#define DEFAULT_TIMEOUT   	5
+
+enum DataType {
+    CMD		= 0,
+    DATA	= 1,
+};
+
+/** Modem class.
+ *  Used for Modem communication. attention that Modem module communicate with MCU in serial protocol
+ */
+class Modem
+{
+
+public:
+    /**	Create Modem Instance
+     *  @param tx	uart transmit pin to communicate with Modem
+     *  @param rx	uart receive pin to communicate with Modem
+     *  @param baudRate	baud rate of uart communication
+     */
+    Modem(PinName tx, PinName rx, int baudRate) : serialModem(tx, rx) {
+        serialModem.baud(baudRate);
+    };
+
+	Serial serialModem;
+
+    /** Power on Modem
+     */
+    void preInit(void);
+
+    /** check serialModem is readable or not
+     *	@returns
+     *		true on readable
+     *		false on not readable
+     */
+    bool readable();
+
+    /** read one byte from serialModem
+     *	@returns
+     *		one byte read from serialModem
+     */
+    char readByte(void);
+
+    /** read from Modem module and save to buffer array
+     *  @param  buffer	buffer array to save what read from Modem module
+     *  @param  count 	the maximal bytes number read from Modem module
+     *  @param  timeOut	time to wait for reading from Modem module
+     *  @returns
+     *      0 on success
+     *      -1 on error
+     */
+    int readBuffer(char* buffer,int count, unsigned int timeOut);
+
+
+    /** clean Buffer
+     *	@param buffer	buffer to clean
+     *	@param count	number of bytes to clean
+     */
+    void cleanBuffer(char* buffer, int count);
+
+    /** send AT command to Modem module
+     *  @param cmd	command array which will be send to GPRS module
+     */
+    void sendCmd(const char* cmd);
+
+    /**send "AT" to Modem module
+     */
+    void sendATTest(void);
+
+    /**	compare the response from GPRS module with a string
+     *	@param resp	buffer to be compared
+     *	@param len length that will be compared
+     *	@param timeout	waiting seconds till timeout
+     */
+    bool respCmp(const char *resp, unsigned int len, unsigned int timeout);
+
+    /** check Modem module response before time out
+     *  @param  *resp   correct response which Modem module will return
+     *  @param  *timeout    waiting seconds till timeout
+     *  @returns
+     *      0 on success
+     *      -1 on error
+     */
+    int waitForResp(const char *resp, unsigned int timeout,DataType type);
+
+    /** send AT command to GPRS module and wait for correct response
+     *  @param  *cmd 	AT command which will be send to GPRS module
+     *  @param  *resp   correct response which GPRS module will return
+     *  @param  *timeout 	waiting seconds till timeout
+     *  @returns
+     *      0 on success
+     *      -1 on error
+     */
+    int sendCmdAndWaitForResp(const char* data, const char *resp, unsigned timeout,DataType type);
+
+    Timer timeCnt;
+
+private:
+
+};
+
+#endif