- Don't think anything was changed or updated.... simply viewed the class
Dependents: Component_Test_Interface
Fork of BridgeDriver by
BridgeDriver.h@10:60c3d513b872, 2014-07-28 (annotated)
- Committer:
- jason701802
- Date:
- Mon Jul 28 21:42:37 2014 +0000
- Revision:
- 10:60c3d513b872
- Parent:
- 9:00e8b7afb2c7
- Child:
- 11:2481432a0988
Updated documentation
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
jason701802 | 0:b1e3fa917367 | 1 | #include "mbed.h" |
jason701802 | 0:b1e3fa917367 | 2 | #include "MCP23017.h" |
jason701802 | 1:c8e328389a98 | 3 | #include "TextLCD.h" //if using diagnostic |
jason701802 | 0:b1e3fa917367 | 4 | |
jason701802 | 5:c1f32ce026f6 | 5 | #ifndef BRIDGEDRIVER_H |
jason701802 | 0:b1e3fa917367 | 6 | #define BRIDGEDRIVER_H |
jason701802 | 0:b1e3fa917367 | 7 | |
jason701802 | 4:87768972db3f | 8 | |
jason701802 | 8:36e2cd31ccf3 | 9 | #define DEFAULT_PWM_PERIOD 0.0002 |
jason701802 | 4:87768972db3f | 10 | |
jason701802 | 0:b1e3fa917367 | 11 | //pin definitions |
jason701802 | 0:b1e3fa917367 | 12 | #define PIN_CH1 P1_18 //hardware PWM1[1] |
jason701802 | 0:b1e3fa917367 | 13 | #define PIN_CH2 P2_0 //hardware PWM1[1] |
jason701802 | 0:b1e3fa917367 | 14 | #define PIN_CH3 P1_20 //hardware PWM1[2] |
jason701802 | 0:b1e3fa917367 | 15 | #define PIN_CH4 P2_1 //hardware PWM1[2] |
jason701802 | 0:b1e3fa917367 | 16 | #define PIN_CH5 P1_21 //hardware PWM1[3] |
jason701802 | 0:b1e3fa917367 | 17 | #define PIN_CH6 P1_23 //hardware PWM1[4] |
jason701802 | 0:b1e3fa917367 | 18 | #define PIN_CH7 P1_24 //hardware PWM1[5] |
jason701802 | 0:b1e3fa917367 | 19 | #define PIN_CH8 P1_26 //hardware PWM1[6] |
jason701802 | 0:b1e3fa917367 | 20 | |
jason701802 | 0:b1e3fa917367 | 21 | |
jason701802 | 9:00e8b7afb2c7 | 22 | #define EN_ADDR 0x40 //i2c address of enable pin port expander. 0x40 for rev 1.0, 0x4C for rev 2.0 |
jason701802 | 0:b1e3fa917367 | 23 | #define LED_ADDR 0x4E //i2c address of button and LED port expander |
jason701802 | 0:b1e3fa917367 | 24 | |
jason701802 | 9:00e8b7afb2c7 | 25 | /** BridgeDriver class |
jason701802 | 10:60c3d513b872 | 26 | * For controlling the Test Controller bridges. |
jason701802 | 9:00e8b7afb2c7 | 27 | */ |
jason701802 | 0:b1e3fa917367 | 28 | class BridgeDriver{ |
jason701802 | 1:c8e328389a98 | 29 | |
jason701802 | 1:c8e328389a98 | 30 | |
jason701802 | 1:c8e328389a98 | 31 | public: |
jason701802 | 9:00e8b7afb2c7 | 32 | /** Channel pair labels |
jason701802 | 9:00e8b7afb2c7 | 33 | * MOTOR_A - Channel 1 and 2. |
jason701802 | 9:00e8b7afb2c7 | 34 | * MOTOR_B - Channel 3 and 4. |
jason701802 | 9:00e8b7afb2c7 | 35 | * MOTOR_C - Channel 5 and 6. |
jason701802 | 9:00e8b7afb2c7 | 36 | * MOTOR_D - Channel 7 and 8. |
jason701802 | 9:00e8b7afb2c7 | 37 | */ |
jason701802 | 7:7dabd934ebe4 | 38 | enum Motors{ MOTOR_A, |
jason701802 | 7:7dabd934ebe4 | 39 | MOTOR_B, |
jason701802 | 7:7dabd934ebe4 | 40 | MOTOR_C, |
jason701802 | 7:7dabd934ebe4 | 41 | MOTOR_D |
jason701802 | 1:c8e328389a98 | 42 | }; |
jason701802 | 1:c8e328389a98 | 43 | |
jason701802 | 9:00e8b7afb2c7 | 44 | /** Create BridgeDriver object |
jason701802 | 9:00e8b7afb2c7 | 45 | * |
jason701802 | 9:00e8b7afb2c7 | 46 | * @param *i2c A pointer to the I2C bus that the Enable control and LED port expanders are on. |
jason701802 | 9:00e8b7afb2c7 | 47 | * @param enPwmA (Optional) 1 enables PWM on channels 1 and 2 for motor control, 0 disables PWM on channels 1 and 2 for solenoid control. Defaults to 0. |
jason701802 | 9:00e8b7afb2c7 | 48 | * @param enPwmB (Optional) 1 enables PWM on channels 3 and 4 for motor control, 0 disables PWM on channels 3 and 4 for solenoid control. Defaults to 0. |
jason701802 | 9:00e8b7afb2c7 | 49 | * @param enPwmC (Optional) 1 enables PWM on channels 5 and 6 for motor control, 0 disables PWM on channels 5 and 6 for solenoid control. Defaults to 0. |
jason701802 | 9:00e8b7afb2c7 | 50 | * @param enPwmD (Optional) 1 enables PWM on channels 7 and 8 for motor control, 0 disables PWM on channels 7 and 8 for solenoid control. Defaults to 0. |
jason701802 | 9:00e8b7afb2c7 | 51 | * @param enAddr (Optional) Address of the Enable control port expander. May be necessary if not using a rev 1.0 board. TODO: update for rev 2.0. |
jason701802 | 9:00e8b7afb2c7 | 52 | * @param ledAddr (Optional) Address of the LED control port expander. May be necessary if not using rev 1.0 or 2.0 board. |
jason701802 | 9:00e8b7afb2c7 | 53 | */ |
jason701802 | 1:c8e328389a98 | 54 | BridgeDriver( I2C *i2c, uint8_t enPwmA = 0, uint8_t enPwmB = 0, uint8_t enPwmC = 0, uint8_t enPwmD = 0, uint8_t enAddr = EN_ADDR, uint8_t ledAddr = LED_ADDR); |
jason701802 | 0:b1e3fa917367 | 55 | |
jason701802 | 9:00e8b7afb2c7 | 56 | /** Destroy BridgeDriver object |
jason701802 | 9:00e8b7afb2c7 | 57 | */ |
jason701802 | 0:b1e3fa917367 | 58 | ~BridgeDriver(); |
jason701802 | 0:b1e3fa917367 | 59 | |
jason701802 | 9:00e8b7afb2c7 | 60 | /** Enables/disables PWM for channel pairs |
jason701802 | 9:00e8b7afb2c7 | 61 | * @param enPwmA 1 enables PWM on channels 1 and 2 for motor control, 0 disables PWM on channels 1 and 2 for solenoid control. |
jason701802 | 9:00e8b7afb2c7 | 62 | * @param enPwmB 1 enables PWM on channels 3 and 4 for motor control, 0 disables PWM on channels 3 and 4 for solenoid control. |
jason701802 | 9:00e8b7afb2c7 | 63 | * @param enPwmC 1 enables PWM on channels 5 and 6 for motor control, 0 disables PWM on channels 5 and 6 for solenoid control. |
jason701802 | 9:00e8b7afb2c7 | 64 | * @param enPwmD 1 enables PWM on channels 7 and 8 for motor control, 0 disables PWM on channels 7 and 8 for solenoid control. |
jason701802 | 9:00e8b7afb2c7 | 65 | */ |
jason701802 | 0:b1e3fa917367 | 66 | void enablePwm(uint8_t enPwmA, uint8_t enPwmB, uint8_t enPwmC, uint8_t enPwmD); |
jason701802 | 9:00e8b7afb2c7 | 67 | |
jason701802 | 9:00e8b7afb2c7 | 68 | /** Enables/disables PWM for a given channel pair |
jason701802 | 10:60c3d513b872 | 69 | * @param motor Motor (channel pair) to enale/disable PWM. |
jason701802 | 9:00e8b7afb2c7 | 70 | * @param enPwm 1 enables PWM on channel pair for motor control, 0 disables PWM on channel pair for solenoid control. |
jason701802 | 9:00e8b7afb2c7 | 71 | */ |
jason701802 | 7:7dabd934ebe4 | 72 | void enablePwm(Motors motor, uint8_t enPwm); |
jason701802 | 0:b1e3fa917367 | 73 | |
jason701802 | 9:00e8b7afb2c7 | 74 | /** Enables/disables braking for channel pairs |
jason701802 | 10:60c3d513b872 | 75 | * @param enBrakeA 1 drives output to GND when off, 0 floats output when off. |
jason701802 | 10:60c3d513b872 | 76 | * @param enBrakeB 1 drives output to GND when off, 0 floats output when off. |
jason701802 | 10:60c3d513b872 | 77 | * @param enBrakeC 1 drives output to GND when off, 0 floats output when off. |
jason701802 | 10:60c3d513b872 | 78 | * @param enBrakeD 1 drives output to GND when off, 0 floats output when off. |
jason701802 | 9:00e8b7afb2c7 | 79 | */ |
jason701802 | 9:00e8b7afb2c7 | 80 | void enableBraking(uint8_t enBrakeA, uint8_t enBrakeB, uint8_t enBrakeC, uint8_t enBrakeD); |
jason701802 | 0:b1e3fa917367 | 81 | |
jason701802 | 9:00e8b7afb2c7 | 82 | /** Enables/disables braking for given channel pair |
jason701802 | 10:60c3d513b872 | 83 | * @param enBrakeA 1 drives output to GND when off, 0 floats output when off. |
jason701802 | 9:00e8b7afb2c7 | 84 | */ |
jason701802 | 7:7dabd934ebe4 | 85 | void enableBraking(Motors motor, uint8_t enBrake); |
jason701802 | 0:b1e3fa917367 | 86 | |
jason701802 | 9:00e8b7afb2c7 | 87 | /** Force a specific channel to GND without changing braking default |
jason701802 | 9:00e8b7afb2c7 | 88 | * Will fail if PWM is enabled on given channel. Use forceBrake(Motors motor) to force braking on channels with PWM enabled. |
jason701802 | 9:00e8b7afb2c7 | 89 | * @param ch Channel to drive to GND |
jason701802 | 9:00e8b7afb2c7 | 90 | * @return |
jason701802 | 10:60c3d513b872 | 91 | * 0 on success, |
jason701802 | 10:60c3d513b872 | 92 | * non 0 on failure. |
jason701802 | 9:00e8b7afb2c7 | 93 | */ |
jason701802 | 9:00e8b7afb2c7 | 94 | int forceBrake(uint8_t ch); |
jason701802 | 9:00e8b7afb2c7 | 95 | |
jason701802 | 9:00e8b7afb2c7 | 96 | /** Force a specific motor (channel pair) to GND without changing braking default |
jason701802 | 9:00e8b7afb2c7 | 97 | * Will fail if PWM is disabled on given channel. Use forceBrake(uint8_t ch) to force braking on channels with PWM disabled. |
jason701802 | 9:00e8b7afb2c7 | 98 | * @param motor Motor (channel pair) to drive to GND |
jason701802 | 9:00e8b7afb2c7 | 99 | * @return |
jason701802 | 10:60c3d513b872 | 100 | * 0 on success, |
jason701802 | 10:60c3d513b872 | 101 | * non 0 on failure. |
jason701802 | 9:00e8b7afb2c7 | 102 | */ |
jason701802 | 9:00e8b7afb2c7 | 103 | int forceBrake(Motors motor); |
jason701802 | 9:00e8b7afb2c7 | 104 | |
jason701802 | 9:00e8b7afb2c7 | 105 | /** Force a specific channel to float without changing braking default |
jason701802 | 9:00e8b7afb2c7 | 106 | * Will float both channels of a motor (channel pair) if PWM is enabled for the channel. |
jason701802 | 9:00e8b7afb2c7 | 107 | * @param ch Channel to float. |
jason701802 | 9:00e8b7afb2c7 | 108 | * @return |
jason701802 | 10:60c3d513b872 | 109 | * 0 on success, |
jason701802 | 10:60c3d513b872 | 110 | * non 0 on failure. |
jason701802 | 9:00e8b7afb2c7 | 111 | */ |
jason701802 | 9:00e8b7afb2c7 | 112 | int forceFloat(uint8_t ch); |
jason701802 | 0:b1e3fa917367 | 113 | |
jason701802 | 9:00e8b7afb2c7 | 114 | /** Force a specific motor to float without changing braking default |
jason701802 | 9:00e8b7afb2c7 | 115 | * Will fail if PWM is disabled on given channel. Use forceFloat(uint8_t ch) to force floating on channels with PWM disabled. |
jason701802 | 9:00e8b7afb2c7 | 116 | * @param motor Motor (channel pair) to float. |
jason701802 | 9:00e8b7afb2c7 | 117 | * @return |
jason701802 | 10:60c3d513b872 | 118 | * 0 on success, |
jason701802 | 10:60c3d513b872 | 119 | * non 0 on failure. |
jason701802 | 9:00e8b7afb2c7 | 120 | */ |
jason701802 | 9:00e8b7afb2c7 | 121 | int forceFloat(Motors motor); |
jason701802 | 9:00e8b7afb2c7 | 122 | |
jason701802 | 9:00e8b7afb2c7 | 123 | /** Set all outputs with a single byte (bitwise control). |
jason701802 | 9:00e8b7afb2c7 | 124 | * Will fail if PWM is enabled for any motor (channel pair). |
jason701802 | 9:00e8b7afb2c7 | 125 | * @param state Sets all the outputs. Each bit controls one channel. |
jason701802 | 10:60c3d513b872 | 126 | * 1 drives high, |
jason701802 | 9:00e8b7afb2c7 | 127 | * 0 brakes (drives to GND) or floats depending on setting of enBrake. |
jason701802 | 9:00e8b7afb2c7 | 128 | * @return |
jason701802 | 10:60c3d513b872 | 129 | * -1 on failure, |
jason701802 | 10:60c3d513b872 | 130 | * 0 if all outputs are set to 0, |
jason701802 | 10:60c3d513b872 | 131 | * 1 if any output is set to 1. |
jason701802 | 9:00e8b7afb2c7 | 132 | */ |
jason701802 | 0:b1e3fa917367 | 133 | int drive(uint8_t state); |
jason701802 | 9:00e8b7afb2c7 | 134 | |
jason701802 | 9:00e8b7afb2c7 | 135 | /** Set the output of one channel |
jason701802 | 9:00e8b7afb2c7 | 136 | * @param ch Channel to set. |
jason701802 | 9:00e8b7afb2c7 | 137 | * @param on State to set. |
jason701802 | 10:60c3d513b872 | 138 | * 1 drives high, |
jason701802 | 9:00e8b7afb2c7 | 139 | * 0 brakes (drives to GND) or floats depending on setting of enBrake. |
jason701802 | 9:00e8b7afb2c7 | 140 | * @return |
jason701802 | 10:60c3d513b872 | 141 | * -1 on fauilure, |
jason701802 | 10:60c3d513b872 | 142 | * 0 if set to 0, |
jason701802 | 10:60c3d513b872 | 143 | * 1 if set to 1. |
jason701802 | 9:00e8b7afb2c7 | 144 | */ |
jason701802 | 0:b1e3fa917367 | 145 | int drive(uint8_t ch, uint8_t on); |
jason701802 | 9:00e8b7afb2c7 | 146 | |
jason701802 | 9:00e8b7afb2c7 | 147 | /** Control the speed of a motor |
jason701802 | 9:00e8b7afb2c7 | 148 | * @param motor Motor (channel pair) to control. |
jason701802 | 10:60c3d513b872 | 149 | * @param speed Speed to set motor to. Acceptable range: -1.0 to 1.0. Speed of 0.0 will coast or brake depending on setting of enBrake. |
jason701802 | 9:00e8b7afb2c7 | 150 | * @return |
jason701802 | 10:60c3d513b872 | 151 | * -1 on failure, |
jason701802 | 10:60c3d513b872 | 152 | * speed of set output on success. |
jason701802 | 9:00e8b7afb2c7 | 153 | */ |
jason701802 | 9:00e8b7afb2c7 | 154 | float drive(Motors motor, float speed); |
jason701802 | 9:00e8b7afb2c7 | 155 | |
jason701802 | 9:00e8b7afb2c7 | 156 | /** Control the speed of a motor |
jason701802 | 9:00e8b7afb2c7 | 157 | * @param motor Motor (channel pair) to control. |
jason701802 | 10:60c3d513b872 | 158 | * @param speed Speed to set motor to. Acceptable range: 0.0 to 1.0. Speed of 0.0 will coast or brake depending on setting of enBrake. |
jason701802 | 9:00e8b7afb2c7 | 159 | * @param dir Set direction to drive motor. |
jason701802 | 10:60c3d513b872 | 160 | * 1: forward, |
jason701802 | 10:60c3d513b872 | 161 | * -1: reverse, |
jason701802 | 10:60c3d513b872 | 162 | * 0: brake, irregardless of setting of enBrake or speed. |
jason701802 | 9:00e8b7afb2c7 | 163 | * @return |
jason701802 | 10:60c3d513b872 | 164 | * -1 on failure, |
jason701802 | 10:60c3d513b872 | 165 | * speed of set output on success. |
jason701802 | 9:00e8b7afb2c7 | 166 | */ |
jason701802 | 9:00e8b7afb2c7 | 167 | float drive(Motors motor, int8_t dir, float speed); |
jason701802 | 9:00e8b7afb2c7 | 168 | |
jason701802 | 9:00e8b7afb2c7 | 169 | |
jason701802 | 9:00e8b7afb2c7 | 170 | /** Display diagnostic information on the LCD |
jason701802 | 10:60c3d513b872 | 171 | * @param *lcd Pointer to TextLCD object to display info on. |
jason701802 | 9:00e8b7afb2c7 | 172 | */ |
jason701802 | 1:c8e328389a98 | 173 | void diagnostic(TextLCD_I2C *lcd); |
jason701802 | 9:00e8b7afb2c7 | 174 | |
jason701802 | 9:00e8b7afb2c7 | 175 | /** Change the PWM period |
jason701802 | 10:60c3d513b872 | 176 | * @param newPWMperiod The new PWM period. In seconds. System default is 0.0002 (5kHz). |
jason701802 | 9:00e8b7afb2c7 | 177 | */ |
jason701802 | 8:36e2cd31ccf3 | 178 | void setPWMperiod(float newPWMperiod); |
jason701802 | 0:b1e3fa917367 | 179 | |
jason701802 | 0:b1e3fa917367 | 180 | |
jason701802 | 0:b1e3fa917367 | 181 | |
jason701802 | 0:b1e3fa917367 | 182 | private: |
jason701802 | 0:b1e3fa917367 | 183 | DigitalOut *_d[8]; |
jason701802 | 0:b1e3fa917367 | 184 | PwmOut *_p[8]; |
jason701802 | 0:b1e3fa917367 | 185 | MCP23017 *_EnCtl; |
jason701802 | 0:b1e3fa917367 | 186 | MCP23017 *_IO; |
jason701802 | 0:b1e3fa917367 | 187 | I2C *_i2c; |
jason701802 | 0:b1e3fa917367 | 188 | uint8_t _enAddr; |
jason701802 | 0:b1e3fa917367 | 189 | uint8_t _ledAddr; |
jason701802 | 1:c8e328389a98 | 190 | uint8_t _pwm[4]; //enabled full bridges |
jason701802 | 1:c8e328389a98 | 191 | uint8_t _pwmCh; //currently actie PWM pins |
jason701802 | 1:c8e328389a98 | 192 | int8_t _dir[4]; //dir of 1 means lower # ch is driving, dir of -1 means higher number ch is driving |
jason701802 | 0:b1e3fa917367 | 193 | uint8_t _braking[4]; |
jason701802 | 1:c8e328389a98 | 194 | uint8_t _oldLedState; //for setLed functions. Kept external to overload function |
jason701802 | 8:36e2cd31ccf3 | 195 | float _PWMperiod; |
jason701802 | 0:b1e3fa917367 | 196 | |
jason701802 | 0:b1e3fa917367 | 197 | void enableCh(uint8_t ch, uint8_t en); |
jason701802 | 0:b1e3fa917367 | 198 | void setLed(uint8_t ch, uint8_t en); |
jason701802 | 0:b1e3fa917367 | 199 | void setLed(uint8_t state); |
jason701802 | 0:b1e3fa917367 | 200 | void setPwm(uint8_t ch, uint8_t en); |
jason701802 | 0:b1e3fa917367 | 201 | |
jason701802 | 0:b1e3fa917367 | 202 | |
jason701802 | 0:b1e3fa917367 | 203 | |
jason701802 | 0:b1e3fa917367 | 204 | }; |
jason701802 | 0:b1e3fa917367 | 205 | |
jason701802 | 0:b1e3fa917367 | 206 | |
jason701802 | 0:b1e3fa917367 | 207 | |
jason701802 | 0:b1e3fa917367 | 208 | #endif |