Modification of Mbed-dev library for LQFP48 package microcontrollers: STM32F103C8 (STM32F103C8T6) and STM32F103CB (STM32F103CBT6) (Bluepill boards, Maple mini etc. )
Fork of mbed-STM32F103C8_org by
Library for STM32F103C8 (Bluepill boards etc.).
Use this instead of mbed library.
This library allows the size of the code in the FLASH up to 128kB. Therefore, code also runs on microcontrollers STM32F103CB (eg. Maple mini).
But in the case of STM32F103C8, check the size of the resulting code would not exceed 64kB.
To compile a program with this library, use NUCLEO-F103RB as the target name. !
Changes:
- Corrected initialization of the HSE + crystal clock (mbed permanent bug), allowing the use of on-board xtal (8MHz).(1)
- Additionally, it also set USB clock (48Mhz).(2)
- Definitions of pins and peripherals adjusted to LQFP48 case.
- Board led LED1 is now PC_13 (3)
- USER_BUTTON is now PC_14 (4)
Now the library is complete rebuilt based on mbed-dev v160 (and not yet fully tested).
notes
(1) - In case 8MHz xtal on board, CPU frequency is 72MHz. Without xtal is 64MHz.
(2) - Using the USB interface is only possible if STM32 is clocking by on-board 8MHz xtal or external clock signal 8MHz on the OSC_IN pin.
(3) - On Bluepill board led operation is reversed, i.e. 0 - led on, 1 - led off.
(4) - Bluepill board has no real user button
Information
After export to SW4STM (AC6):
- add line
#include "mbed_config.h"
in files Serial.h and RawSerial.h - in project properties change
Optimisation Level
toOptimise for size (-Os)
hal/flash_api.h@148:8b0b02bf146f, 2017-04-27 (annotated)
- Committer:
- mega64
- Date:
- Thu Apr 27 23:56:38 2017 +0000
- Revision:
- 148:8b0b02bf146f
- Parent:
- 146:03e976389d16
Remove unnecessary folders
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mega64 | 146:03e976389d16 | 1 | /** \addtogroup hal */ |
mega64 | 146:03e976389d16 | 2 | /** @{*/ |
mega64 | 146:03e976389d16 | 3 | |
mega64 | 146:03e976389d16 | 4 | /* mbed Microcontroller Library |
mega64 | 146:03e976389d16 | 5 | * Copyright (c) 2017 ARM Limited |
mega64 | 146:03e976389d16 | 6 | * |
mega64 | 146:03e976389d16 | 7 | * Licensed under the Apache License, Version 2.0 (the "License"); |
mega64 | 146:03e976389d16 | 8 | * you may not use this file except in compliance with the License. |
mega64 | 146:03e976389d16 | 9 | * You may obtain a copy of the License at |
mega64 | 146:03e976389d16 | 10 | * |
mega64 | 146:03e976389d16 | 11 | * http://www.apache.org/licenses/LICENSE-2.0 |
mega64 | 146:03e976389d16 | 12 | * |
mega64 | 146:03e976389d16 | 13 | * Unless required by applicable law or agreed to in writing, software |
mega64 | 146:03e976389d16 | 14 | * distributed under the License is distributed on an "AS IS" BASIS, |
mega64 | 146:03e976389d16 | 15 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
mega64 | 146:03e976389d16 | 16 | * See the License for the specific language governing permissions and |
mega64 | 146:03e976389d16 | 17 | * limitations under the License. |
mega64 | 146:03e976389d16 | 18 | */ |
mega64 | 146:03e976389d16 | 19 | #ifndef MBED_FLASH_API_H |
mega64 | 146:03e976389d16 | 20 | #define MBED_FLASH_API_H |
mega64 | 146:03e976389d16 | 21 | |
mega64 | 146:03e976389d16 | 22 | #include "device.h" |
mega64 | 146:03e976389d16 | 23 | #include <stdint.h> |
mega64 | 146:03e976389d16 | 24 | |
mega64 | 146:03e976389d16 | 25 | #if DEVICE_FLASH |
mega64 | 146:03e976389d16 | 26 | |
mega64 | 146:03e976389d16 | 27 | #define MBED_FLASH_INVALID_SIZE 0xFFFFFFFF |
mega64 | 146:03e976389d16 | 28 | |
mega64 | 146:03e976389d16 | 29 | typedef struct flash_s flash_t; |
mega64 | 146:03e976389d16 | 30 | |
mega64 | 146:03e976389d16 | 31 | #if TARGET_FLASH_CMSIS_ALGO |
mega64 | 146:03e976389d16 | 32 | #include "flash_data.h" |
mega64 | 146:03e976389d16 | 33 | #endif |
mega64 | 146:03e976389d16 | 34 | |
mega64 | 146:03e976389d16 | 35 | #ifdef __cplusplus |
mega64 | 146:03e976389d16 | 36 | extern "C" { |
mega64 | 146:03e976389d16 | 37 | #endif |
mega64 | 146:03e976389d16 | 38 | |
mega64 | 146:03e976389d16 | 39 | /** |
mega64 | 146:03e976389d16 | 40 | * \defgroup flash_hal Flash HAL API |
mega64 | 146:03e976389d16 | 41 | * @{ |
mega64 | 146:03e976389d16 | 42 | */ |
mega64 | 146:03e976389d16 | 43 | |
mega64 | 146:03e976389d16 | 44 | /** Initialize the flash peripheral and the flash_t object |
mega64 | 146:03e976389d16 | 45 | * |
mega64 | 146:03e976389d16 | 46 | * @param obj The flash object |
mega64 | 146:03e976389d16 | 47 | * @return 0 for success, -1 for error |
mega64 | 146:03e976389d16 | 48 | */ |
mega64 | 146:03e976389d16 | 49 | int32_t flash_init(flash_t *obj); |
mega64 | 146:03e976389d16 | 50 | |
mega64 | 146:03e976389d16 | 51 | /** Uninitialize the flash peripheral and the flash_t object |
mega64 | 146:03e976389d16 | 52 | * |
mega64 | 146:03e976389d16 | 53 | * @param obj The flash object |
mega64 | 146:03e976389d16 | 54 | * @return 0 for success, -1 for error |
mega64 | 146:03e976389d16 | 55 | */ |
mega64 | 146:03e976389d16 | 56 | int32_t flash_free(flash_t *obj); |
mega64 | 146:03e976389d16 | 57 | |
mega64 | 146:03e976389d16 | 58 | /** Erase one sector starting at defined address |
mega64 | 146:03e976389d16 | 59 | * |
mega64 | 146:03e976389d16 | 60 | * The address should be at sector boundary. This function does not do any check for address alignments |
mega64 | 146:03e976389d16 | 61 | * @param obj The flash object |
mega64 | 146:03e976389d16 | 62 | * @param address The sector starting address |
mega64 | 146:03e976389d16 | 63 | * @return 0 for success, -1 for error |
mega64 | 146:03e976389d16 | 64 | */ |
mega64 | 146:03e976389d16 | 65 | int32_t flash_erase_sector(flash_t *obj, uint32_t address); |
mega64 | 146:03e976389d16 | 66 | |
mega64 | 146:03e976389d16 | 67 | /** Program one page starting at defined address |
mega64 | 146:03e976389d16 | 68 | * |
mega64 | 146:03e976389d16 | 69 | * The page should be at page boundary, should not cross multiple sectors. |
mega64 | 146:03e976389d16 | 70 | * This function does not do any check for address alignments or if size is aligned to a page size. |
mega64 | 146:03e976389d16 | 71 | * @param obj The flash object |
mega64 | 146:03e976389d16 | 72 | * @param address The sector starting address |
mega64 | 146:03e976389d16 | 73 | * @param data The data buffer to be programmed |
mega64 | 146:03e976389d16 | 74 | * @param size The number of bytes to program |
mega64 | 146:03e976389d16 | 75 | * @return 0 for success, -1 for error |
mega64 | 146:03e976389d16 | 76 | */ |
mega64 | 146:03e976389d16 | 77 | int32_t flash_program_page(flash_t *obj, uint32_t address, const uint8_t *data, uint32_t size); |
mega64 | 146:03e976389d16 | 78 | |
mega64 | 146:03e976389d16 | 79 | /** Get sector size |
mega64 | 146:03e976389d16 | 80 | * |
mega64 | 146:03e976389d16 | 81 | * @param obj The flash object |
mega64 | 146:03e976389d16 | 82 | * @param address The sector starting address |
mega64 | 146:03e976389d16 | 83 | * @return The size of a sector |
mega64 | 146:03e976389d16 | 84 | */ |
mega64 | 146:03e976389d16 | 85 | uint32_t flash_get_sector_size(const flash_t *obj, uint32_t address); |
mega64 | 146:03e976389d16 | 86 | |
mega64 | 146:03e976389d16 | 87 | /** Get page size |
mega64 | 146:03e976389d16 | 88 | * |
mega64 | 146:03e976389d16 | 89 | * @param obj The flash object |
mega64 | 146:03e976389d16 | 90 | * @param address The page starting address |
mega64 | 146:03e976389d16 | 91 | * @return The size of a page |
mega64 | 146:03e976389d16 | 92 | */ |
mega64 | 146:03e976389d16 | 93 | uint32_t flash_get_page_size(const flash_t *obj); |
mega64 | 146:03e976389d16 | 94 | |
mega64 | 146:03e976389d16 | 95 | /** Get start address for the flash region |
mega64 | 146:03e976389d16 | 96 | * |
mega64 | 146:03e976389d16 | 97 | * @param obj The flash object |
mega64 | 146:03e976389d16 | 98 | * @return The start address for the flash region |
mega64 | 146:03e976389d16 | 99 | */ |
mega64 | 146:03e976389d16 | 100 | uint32_t flash_get_start_address(const flash_t *obj); |
mega64 | 146:03e976389d16 | 101 | |
mega64 | 146:03e976389d16 | 102 | /** Get the flash region size |
mega64 | 146:03e976389d16 | 103 | * |
mega64 | 146:03e976389d16 | 104 | * @param obj The flash object |
mega64 | 146:03e976389d16 | 105 | * @return The flash region size |
mega64 | 146:03e976389d16 | 106 | */ |
mega64 | 146:03e976389d16 | 107 | uint32_t flash_get_size(const flash_t *obj); |
mega64 | 146:03e976389d16 | 108 | |
mega64 | 146:03e976389d16 | 109 | /**@}*/ |
mega64 | 146:03e976389d16 | 110 | |
mega64 | 146:03e976389d16 | 111 | #ifdef __cplusplus |
mega64 | 146:03e976389d16 | 112 | } |
mega64 | 146:03e976389d16 | 113 | #endif |
mega64 | 146:03e976389d16 | 114 | |
mega64 | 146:03e976389d16 | 115 | #endif |
mega64 | 146:03e976389d16 | 116 | |
mega64 | 146:03e976389d16 | 117 | #endif |
mega64 | 146:03e976389d16 | 118 | |
mega64 | 146:03e976389d16 | 119 | /** @}*/ |