mbed-dev library fork for STM32F100R6 microcontroller (LQFP64, 24MHz, 32kB flash, 4kB ram, 2-channel DAC, HDMI CEC, very cheap) . Use in online compiler (instead mbed library) with selected platform Nucleo F103RB.
Fork of mbed-dev by
Tested and working:
- blink
- system frequency 24Mhz (with external xtal 8Mhz)
- stdio uart on pins PA_2-PA_3
- Serial on pins PA_9-PA_10
- AnalogOut on pins PA_4, PA_5 (DAC)
- AnalogIn on pins PA_0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PB_0, PB_1, PC_0, PC_1, PC_2, PC_3, PC_5, PC_5
Notes:
- TIM2 is used for mbed needs (eq Timer, Ticker, wait etc. )
Simple test program:Import programtestF100R6
simple tests for STM32F100R6 microcontroller with dedicated library
hal/sleep_api.h
- Committer:
- mega64
- Date:
- 2017-03-19
- Revision:
- 51:25d18ad142c8
- Parent:
- 0:9b334a45a8ff
File content as of revision 51:25d18ad142c8:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_SLEEP_API_H #define MBED_SLEEP_API_H #include "device.h" #if DEVICE_SLEEP #ifdef __cplusplus extern "C" { #endif /** Send the microcontroller to sleep * * The processor is setup ready for sleep, and sent to sleep using __WFI(). In this mode, the * system clock to the core is stopped until a reset or an interrupt occurs. This eliminates * dynamic power used by the processor, memory systems and buses. The processor, peripheral and * memory state are maintained, and the peripherals continue to work and can generate interrupts. * * The processor can be woken up by any internal peripheral interrupt or external pin interrupt. * * @note * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored. * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be * able to access the LocalFileSystem */ void sleep(void); /** Send the microcontroller to deep sleep * * This processor is setup ready for deep sleep, and sent to sleep using __WFI(). This mode * has the same sleep features as sleep plus it powers down peripherals and clocks. All state * is still maintained. * * The processor can only be woken up by an external interrupt on a pin or a watchdog timer. * * @note * The mbed interface semihosting is disconnected as part of going to sleep, and can not be restored. * Flash re-programming and the USB serial port will remain active, but the mbed program will no longer be * able to access the LocalFileSystem */ void deepsleep(void); #ifdef __cplusplus } #endif #endif #endif