mbed-dev library fork for STM32F100R6 microcontroller (LQFP64, 24MHz, 32kB flash, 4kB ram, 2-channel DAC, HDMI CEC, very cheap) . Use in online compiler (instead mbed library) with selected platform Nucleo F103RB.
Fork of mbed-dev by
Tested and working:
- blink
- system frequency 24Mhz (with external xtal 8Mhz)
- stdio uart on pins PA_2-PA_3
- Serial on pins PA_9-PA_10
- AnalogOut on pins PA_4, PA_5 (DAC)
- AnalogIn on pins PA_0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PB_0, PB_1, PC_0, PC_1, PC_2, PC_3, PC_5, PC_5
Notes:
- TIM2 is used for mbed needs (eq Timer, Ticker, wait etc. )
Simple test program:Import programtestF100R6
simple tests for STM32F100R6 microcontroller with dedicated library
hal/gpio_api.h
- Committer:
- mega64
- Date:
- 2017-03-19
- Revision:
- 51:25d18ad142c8
- Parent:
- 0:9b334a45a8ff
File content as of revision 51:25d18ad142c8:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_GPIO_API_H #define MBED_GPIO_API_H #include "device.h" #ifdef __cplusplus extern "C" { #endif /* Set the given pin as GPIO * @param pin The pin to be set as GPIO * @return The GPIO port mask for this pin **/ uint32_t gpio_set(PinName pin); /* Checks if gpio object is connected (pin was not initialized with NC) * @param pin The pin to be set as GPIO * @return 0 if port is initialized with NC **/ int gpio_is_connected(const gpio_t *obj); /* GPIO object */ void gpio_init(gpio_t *obj, PinName pin); void gpio_mode (gpio_t *obj, PinMode mode); void gpio_dir (gpio_t *obj, PinDirection direction); void gpio_write(gpio_t *obj, int value); int gpio_read (gpio_t *obj); // the following set of functions are generic and are implemented in the common gpio.c file void gpio_init_in(gpio_t* gpio, PinName pin); void gpio_init_in_ex(gpio_t* gpio, PinName pin, PinMode mode); void gpio_init_out(gpio_t* gpio, PinName pin); void gpio_init_out_ex(gpio_t* gpio, PinName pin, int value); void gpio_init_inout(gpio_t* gpio, PinName pin, PinDirection direction, PinMode mode, int value); #ifdef __cplusplus } #endif #endif