Nothing Special / mbed-STM32F100R6

mbed-dev library fork for STM32F100R6 microcontroller (LQFP64, 24MHz, 32kB flash, 4kB ram, 2-channel DAC, HDMI CEC, very cheap) . Use in online compiler (instead mbed library) with selected platform Nucleo F103RB.

Fork of mbed-dev by mbed official




Tested and working:

  • blink
  • system frequency 24Mhz (with external xtal 8Mhz)
  • stdio uart on pins PA_2-PA_3
  • Serial on pins PA_9-PA_10
  • AnalogOut on pins PA_4, PA_5 (DAC)
  • AnalogIn on pins PA_0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PB_0, PB_1, PC_0, PC_1, PC_2, PC_3, PC_5, PC_5


    Notes:
  • TIM2 is used for mbed needs (eq Timer, Ticker, wait etc. )




    Simple test program:

    Import programtestF100R6

    simple tests for STM32F100R6 microcontroller with dedicated library

    Last commit 19 Mar 2017 by Nothing Special

api/mbed_error.h

Committer:
mega64
Date:
2017-03-19
Revision:
51:25d18ad142c8
Parent:
0:9b334a45a8ff

File content as of revision 51:25d18ad142c8:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_ERROR_H
#define MBED_ERROR_H

/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
 *
 * @code
 * #error "That shouldn't have happened!"
 * @endcode
 *
 * If the compiler evaluates this line, it will report the error and stop the compile.
 *
 * For example, you could use this to check some user-defined compile-time variables:
 *
 * @code
 * #define NUM_PORTS 7
 * #if (NUM_PORTS > 4)
 *     #error "NUM_PORTS must be less than 4"
 * #endif
 * @endcode
 *
 * Reporting Run-Time Errors:
 * To generate a fatal run-time error, you can use the mbed error() function.
 *
 * @code
 * error("That shouldn't have happened!");
 * @endcode
 *
 * If the mbed running the program executes this function, it will print the
 * message via the USB serial port, and then die with the blue lights of death!
 *
 * The message can use printf-style formatting, so you can report variables in the
 * message too. For example, you could use this to check a run-time condition:
 *
 * @code
 * if(x >= 5) {
 *     error("expected x to be less than 5, but got %d", x);
 * }
 * #endcode
 */

#ifdef __cplusplus
extern "C" {
#endif

void error(const char* format, ...);

#ifdef __cplusplus
}
#endif

#endif