Nothing Special / mbed-STM32F100R6

mbed-dev library fork for STM32F100R6 microcontroller (LQFP64, 24MHz, 32kB flash, 4kB ram, 2-channel DAC, HDMI CEC, very cheap) . Use in online compiler (instead mbed library) with selected platform Nucleo F103RB.

Fork of mbed-dev by mbed official




Tested and working:

  • blink
  • system frequency 24Mhz (with external xtal 8Mhz)
  • stdio uart on pins PA_2-PA_3
  • Serial on pins PA_9-PA_10
  • AnalogOut on pins PA_4, PA_5 (DAC)
  • AnalogIn on pins PA_0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PB_0, PB_1, PC_0, PC_1, PC_2, PC_3, PC_5, PC_5


    Notes:
  • TIM2 is used for mbed needs (eq Timer, Ticker, wait etc. )




    Simple test program:

    Import programtestF100R6

    simple tests for STM32F100R6 microcontroller with dedicated library

    Last commit 19 Mar 2017 by Nothing Special

api/Serial.h

Committer:
mega64
Date:
2017-03-19
Revision:
51:25d18ad142c8
Parent:
50:d2a4a5ee894a

File content as of revision 51:25d18ad142c8:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_SERIAL_H
#define MBED_SERIAL_H

#include "platform.h"

// for 100F6 not implemented (N.S.)
#undef DEVICE_SERIAL_ASYNCH


#if DEVICE_SERIAL

#include "Stream.h"
#include "SerialBase.h"
#include "serial_api.h"

namespace mbed {

/** A serial port (UART) for communication with other serial devices
 *
 * Can be used for Full Duplex communication, or Simplex by specifying
 * one pin as NC (Not Connected)
 *
 * Example:
 * @code
 * // Print "Hello World" to the PC
 *
 * #include "mbed.h"
 *
 * Serial pc(USBTX, USBRX);
 *
 * int main() {
 *     pc.printf("Hello World\n");
 * }
 * @endcode
 */
class Serial : public SerialBase, public Stream {

public:
#if DEVICE_SERIAL_ASYNCH
    using SerialBase::read;
    using SerialBase::write;
#endif

    /** Create a Serial port, connected to the specified transmit and receive pins
     *
     *  @param tx Transmit pin
     *  @param rx Receive pin
     *
     *  @note
     *    Either tx or rx may be specified as NC if unused
     */
    Serial(PinName tx, PinName rx, const char *name=NULL);

protected:
    virtual int _getc();
    virtual int _putc(int c);
};

} // namespace mbed

#endif

#endif