mbed-dev library fork for STM32F100R6 microcontroller (LQFP64, 24MHz, 32kB flash, 4kB ram, 2-channel DAC, HDMI CEC, very cheap) . Use in online compiler (instead mbed library) with selected platform Nucleo F103RB.
Fork of mbed-dev by
Tested and working:
- blink
- system frequency 24Mhz (with external xtal 8Mhz)
- stdio uart on pins PA_2-PA_3
- Serial on pins PA_9-PA_10
- AnalogOut on pins PA_4, PA_5 (DAC)
- AnalogIn on pins PA_0, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PB_0, PB_1, PC_0, PC_1, PC_2, PC_3, PC_5, PC_5
Notes:
- TIM2 is used for mbed needs (eq Timer, Ticker, wait etc. )
Simple test program:Import programtestF100R6
simple tests for STM32F100R6 microcontroller with dedicated library
api/RawSerial.h
- Committer:
- mega64
- Date:
- 2017-03-19
- Revision:
- 51:25d18ad142c8
- Parent:
- 0:9b334a45a8ff
File content as of revision 51:25d18ad142c8:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_RAW_SERIAL_H #define MBED_RAW_SERIAL_H #include "platform.h" #if DEVICE_SERIAL #include "SerialBase.h" #include "serial_api.h" namespace mbed { /** A serial port (UART) for communication with other serial devices * This is a variation of the Serial class that doesn't use streams, * thus making it safe to use in interrupt handlers with the RTOS. * * Can be used for Full Duplex communication, or Simplex by specifying * one pin as NC (Not Connected) * * Example: * @code * // Send a char to the PC * * #include "mbed.h" * * RawSerial pc(USBTX, USBRX); * * int main() { * pc.putc('A'); * } * @endcode */ class RawSerial: public SerialBase { public: /** Create a RawSerial port, connected to the specified transmit and receive pins * * @param tx Transmit pin * @param rx Receive pin * * @note * Either tx or rx may be specified as NC if unused */ RawSerial(PinName tx, PinName rx); /** Write a char to the serial port * * @param c The char to write * * @returns The written char or -1 if an error occured */ int putc(int c); /** Read a char from the serial port * * @returns The char read from the serial port */ int getc(); /** Write a string to the serial port * * @param str The string to write * * @returns 0 if the write succeeds, EOF for error */ int puts(const char *str); int printf(const char *format, ...); }; } // namespace mbed #endif #endif