MicroForce Sensors, Compensated/Amplified
MicroForce_FMA.cpp
- Committer:
- mcm
- Date:
- 2021-06-30
- Revision:
- 1:4b8a700b3f5c
- Parent:
- 0:e4146617a5fc
- Child:
- 2:2f45d928f6e0
File content as of revision 1:4b8a700b3f5c:
/** * @brief MicroForce_FMA.h * @details MicroForce Sensors, Compensated/Amplified. * Functions file. * * * @return N/A * * @author Manuel Caballero * @date 29/June/2021 * @version 29/June/2021 The ORIGIN * @pre N/A. * @warning N/A * @pre This code belongs to Nimbus Centre ( https://www.nimbus.cit.ie ). */ #include "MicroForce_FMA.h" MicroForce_FMA::MicroForce_FMA ( PinName mosi, PinName miso, PinName sclk, PinName cs, uint32_t freq ) : _spi ( mosi, miso, sclk ) , _cs ( cs ) { _spi.frequency( freq ); } MicroForce_FMA::~MicroForce_FMA() { } /** * @brief MicroForce_FMA_GetRawForce ( MicroForce_FMA_status_bits_data_t* , uint16_t* ) * * @details It gets the raw force data. * * @param[in] N/A. * * @param[out] myStatus: Status bits data. * @param[out] myRawBridgeData: Raw bridge data. * * * @return Status of MicroForce_FMA_GetRawForce. * * * @author Manuel Caballero * @date 29/June/2021 * @version 29/June/2021 The ORIGIN * @pre N/A. * @warning N/A. */ MicroForce_FMA::MicroForce_FMA_status_t MicroForce_FMA::MicroForce_FMA_GetRawForce ( MicroForce_FMA_status_bits_data_t* myStatus, uint16_t* myRawBridgeData ) { char cmd[] = { 0, 0 }; uint32_t mySPI_status; /* Get the data */ _cs = 0; mySPI_status = _spi.write ( &cmd[0], 0U, &cmd[0], sizeof( cmd )/sizeof( cmd[0] ) ); _cs = 1; /* Parse the data */ myStatus->status_bits = (MicroForce_FMA_status_bits_t)( cmd[0] & MicroForce_FMA_STATUS_BITS_MASK ); *myRawBridgeData = ( cmd[0] & 0x3F ); *myRawBridgeData <<= 8U; *myRawBridgeData |= cmd[1]; if ( ( mySPI_status / ( sizeof( cmd )/sizeof( cmd[0] ) ) ) == SPI_SUCCESS ) { return MicroForce_FMA_SUCCESS; } else { return MicroForce_FMA_FAILURE; } } /** * @brief MicroForce_FMA_SoftwareShutdown ( MicroForce_FMA_transfer_function_t , char , uint16_t ) * * @details It calculates the force data in Newton (N). * * @param[in] myBridgeData: Raw bridge data. * @param[in] myCalibration: Calibration point. * @param[in] myForceRange: Force range. * * @param[out] N/A * * * @return Force value in Newton. * * * @author Manuel Caballero * @date 29/June/2021 * @version 29/June/2021 The ORIGIN * @pre The function: MicroForce_FMA_GetRawForce must be called to update the bridge data values. * @warning N/A. */ float MicroForce_FMA::MicroForce_FMA_CalculateForce ( MicroForce_FMA_transfer_function_t myCalibration, uint8_t myForceRange, uint16_t myRawBridgeData ) { uint16_t output_max; uint16_t output_min; /* It calculates the calibration point depending on the Transfer Function point of the device selected. ( Datasheet. FIGURE 2. NOMENCLATURE AND ORDER GUIDE 32347833 Issue D ) */ if ( myCalibration == MicroForce_FMA_TRANSFER_FUNCTION_10_TO_90 ) { output_max = 14745U; output_min = 1638U; } else { output_max = 13107U; output_min = 3276U; } /* It calculates the force in N */ return (float)( ( myRawBridgeData - output_min ) * myForceRange )/( output_max - output_min ); } /** * @brief MicroForce_FMA_GetRaw8bitTemperature ( MicroForce_FMA_status_bits_data_t* , char* ) * * @details It gets the raw 8-bit temperature. * * @param[in] N/A * * @param[out] myStatus: Status bits data. * @param[out] myRaw8bitTemp: Raw 8-bit Temperature data. * * * @return Status of MicroForce_FMA_GetRaw8bitTemperature. * * * @author Manuel Caballero * @date 29/June/2021 * @version 29/June/2021 The ORIGIN * @pre N/A. * @warning N/A. */ MicroForce_FMA::MicroForce_FMA_status_t MicroForce_FMA::MicroForce_FMA_GetRaw8bitTemperature ( MicroForce_FMA_status_bits_data_t* myStatus, uint8_t* myRaw8bitTemp ) { char cmd[] = { 0, 0, 0 }; uint32_t mySPI_status; /* Get the data */ _cs = 0; mySPI_status = _spi.write ( &cmd[0], 0U, &cmd[0], sizeof( cmd )/sizeof( cmd[0] ) ); _cs = 1; /* Parse the data */ myStatus->status_bits = (MicroForce_FMA_status_bits_t)( cmd[0] & MicroForce_FMA_STATUS_BITS_MASK ); *myRaw8bitTemp = cmd[2]; if ( ( mySPI_status / ( sizeof( cmd )/sizeof( cmd[0] ) ) ) == SPI_SUCCESS ) { return MicroForce_FMA_SUCCESS; } else { return MicroForce_FMA_FAILURE; } } /** * @brief MicroForce_FMA_GetRaw11bitTemperature ( MicroForce_FMA_status_bits_data_t* , uint16_t* ) * * @details It gets the raw 11-bit temperature. * * @param[in] N/A. * * @param[out] myStatus: Status bits data. * @param[out] myRaw11bitTemp: Raw 11-bit Temperature data. * * * @return Status of MicroForce_FMA_GetRaw11bitTemperature. * * * @author Manuel Caballero * @date 29/June/2021 * @version 29/June/2021 The ORIGIN * @pre N/A. * @warning N/A. */ MicroForce_FMA::MicroForce_FMA_status_t MicroForce_FMA::MicroForce_FMA_GetRaw11bitTemperature ( MicroForce_FMA_status_bits_data_t* myStatus, uint16_t* myRaw11bitTemp ) { char cmd[] = { 0, 0, 0, 0 }; uint32_t mySPI_status; /* Get the data */ _cs = 0; mySPI_status = _spi.write ( &cmd[0], 0U, &cmd[0], sizeof( cmd )/sizeof( cmd[0] ) ); _cs = 1; /* Parse the data */ myStatus->status_bits = (MicroForce_FMA_status_bits_t)( cmd[0] & MicroForce_FMA_STATUS_BITS_MASK ); *myRaw11bitTemp = cmd[2]; *myRaw11bitTemp <<= 8U; *myRaw11bitTemp |= cmd[3]; *myRaw11bitTemp >>= 5U; if ( ( mySPI_status / ( sizeof( cmd )/sizeof( cmd[0] ) ) ) == SPI_SUCCESS ) { return MicroForce_FMA_SUCCESS; } else { return MicroForce_FMA_FAILURE; } } /** * @brief MicroForce_FMA_Calculate8bitTemperature ( char ) * * @details It calculates the 8-bit temperature in Celsius degree. * * @param[in] myRawTemperature: Raw 8-bit temperature value. * * @param[out] N/A * * * @return Temperature value in Celsius degree. * * * @author Manuel Caballero * @date 29/June/2021 * @version 29/June/2021 The ORIGIN * @pre The function:MicroForce_FMA_GetRaw8bitTemperature must be called to update the temperature value. * @warning N/A. */ float MicroForce_FMA::MicroForce_FMA_Calculate8bitTemperature ( uint8_t myRawTemperature ) { uint16_t aux_temp; /* It processes the data correctly. ( Datasheet. Equation 3: Temperature Conversion Function */ aux_temp = (uint16_t)myRawTemperature; aux_temp <<= 3U; aux_temp &= 0x7F8; /* It calculates the temperature in C */ return (float)( ( ( aux_temp / 2047.0 ) * 200.0 ) - 50.0 ); } /** * @brief MicroForce_FMA_Calculate11bitTemperature ( uint16_t ) * * @details It calculates the 11-bit temperature in Celsius degree. * * @param[in] myRawTemperature: Raw 11-bit temperature value. * * @param[out] N/A * * * @return Temperature value in Celsius degree. * * * @author Manuel Caballero * @date 29/June/2021 * @version 29/June/2021 The ORIGIN * @pre The function:MicroForce_FMA_GetRaw11bitTemperature must be called to update the temperature value. * @warning N/A. */ float MicroForce_FMA::MicroForce_FMA_Calculate11bitTemperature ( uint16_t myRawTemperature ) { /* It calculates the temperature in C */ return (float)( ( ( myRawTemperature / 2047.0 ) * 200.0 ) - 50.0 ); } /** * @brief MicroForce_FMA_GetAllRawData ( MicroForce_FMA_status_bits_data_t* , uint16_t* , uint16_t* ) * * @details It gets the all raw data ( bridge data and 11-bit temperature ). * * @param[in] N/A. * * @param[out] myStatus: Status bits data. * @param[out] myRawBridgeData: Raw bridge data. * @param[out] myRaw11bitTemp: Raw 11-bit Temperature data. * * * @return Status of MicroForce_FMA_GetAllRawData. * * * @author Manuel Caballero * @date 29/June/2021 * @version 29/June/2021 The ORIGIN * @pre N/A. * @warning N/A. */ MicroForce_FMA::MicroForce_FMA_status_t MicroForce_FMA::MicroForce_FMA_GetAllRawData ( MicroForce_FMA_status_bits_data_t* myStatus, uint16_t* myRawBridgeData, uint16_t* myRaw11bitTemp ) { char cmd[] = { 0, 0, 0, 0 }; uint32_t mySPI_status; /* Get the data */ _cs = 0; mySPI_status = _spi.write ( &cmd[0], 0U, &cmd[0], sizeof( cmd )/sizeof( cmd[0] ) ); _cs = 1; /* Parse the data */ myStatus->status_bits = (MicroForce_FMA_status_bits_t)( cmd[0] & MicroForce_FMA_STATUS_BITS_MASK ); *myRawBridgeData = ( cmd[0] & 0x3F ); *myRawBridgeData <<= 8U; *myRawBridgeData |= cmd[1]; *myRaw11bitTemp = cmd[2]; *myRaw11bitTemp <<= 8U; *myRaw11bitTemp |= cmd[3]; *myRaw11bitTemp >>= 5U; if ( ( mySPI_status / ( sizeof( cmd )/sizeof( cmd[0] ) ) ) == SPI_SUCCESS ) { return MicroForce_FMA_SUCCESS; } else { return MicroForce_FMA_FAILURE; } }