Manuel Caballero
/
HDC2080
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
HDC2080.h
- Committer:
- mcm
- Date:
- 2019-11-19
- Revision:
- 1:8600f19753b8
- Parent:
- 0:e214a18cbe6d
- Child:
- 3:d36591d51f4d
File content as of revision 1:8600f19753b8:
/**
* @brief HDC2080.h
* @details Low-Power Humidity and Temperature Digital Sensor.
* Header file.
*
*
* @return N/A
*
* @author Manuel Caballero
* @date 19/November/2019
* @version 19/November/2019 The ORIGIN
* @pre N/A.
* @warning N/A
* @pre This code belongs to Nimbus Centre ( https://www.nimbus.cit.ie ).
*/
#ifndef HDC2080_H
#define HDC2080_H
#include "mbed.h"
/**
Example:
@code
@endcode
*/
/*!
Library for the HDC2080 Low-Power Humidity and Temperature Digital Sensor.
*/
class HDC2080
{
public:
/**
* @brief DEFAULT ADDRESSES
*/
typedef enum {
HDC2080_ADDRESS_GND = ( 0b1000000 << 1U ), /*!< ADDR connected to GND */
HDC2080_ADDRESS_VDD = ( 0b1000001 << 1U ) /*!< ADDR connected to VDD */
} HDC2080_addresses_t;
/**
* @brief REGISTER MAP
*/
typedef enum {
HDC2080_TEMPERATURE_LOW = 0x00, /*!< Temperature [7:0] */
HDC2080_TEMPERATURE_HIGH = 0x01, /*!< Temperature [15:8] */
HDC2080_HUMIDITY_LOW = 0x02, /*!< Humidity [7:0] */
HDC2080_HUMIDITY_HIGH = 0x03, /*!< Humidity [15:8] */
HDC2080_INTERRUPT_DRDY = 0x04, /*!< DataReady and interrupt configuration */
HDC2080_TEMPERATURE_MAX = 0x05, /*!< Maximum measured temperature (Not supported in Auto Measurement Mode) */
HDC2080_HUMIDITY_MAX = 0x06, /*!< Maximum measured humidity (Not supported in Auto Measurement Mode) */
HDC2080_INTERRUPT_ENABLE = 0x07, /*!< Interrupt Enable */
HDC2080_TEMP_OFFSET_ADJUST = 0x08, /*!< Temperature offset adjustment */
HDC2080_HUM_OFFSET_ADJUST = 0x09, /*!< Humidity offset adjustment */
HDC2080_TEMP_THR_L = 0x0A, /*!< Temperature Threshold Low */
HDC2080_TEMP_THR_H = 0x0B, /*!< Temperature Threshold High */
HDC2080_RH_THR_L = 0x0C, /*!< Humidity threshold Low */
HDC2080_RH_THR_H = 0x0D, /*!< Humidity threshold High */
HDC2080_RESET_DRDY_INT_CONF = 0x0E, /*!< Soft Reset and Interrupt Configuration */
HDC2080_MEASUREMENT_CONFIGURATION = 0x0F, /*!< Measurement configuration */
HDC2080_MANUFACTURER_ID_LOW = 0xFC, /*!< Manufacturer ID Low */
HDC2080_MANUFACTURER_ID_HIGH = 0xFD, /*!< Manufacturer ID High */
HDC2080_DEVICE_ID_LOW = 0xFE, /*!< Device ID Low */
HDC2080_DEVICE_ID_HIGH = 0xFF /*!< Device ID High */
} HDC2080_register_map_t;
/**
* @brief INTERRUPT/DRDY REGISTER
*/
/* DRDY_STATUS <7>
* NOTE: DataReady bit status. DRDY_STATUS is cleared to 0 when read.
*/
typedef enum {
INTERRUPT_DRDY_DRDY_STATUS_MASK = ( 1U << 7U ), /*!< DRDY_STATUS mask */
INTERRUPT_DRDY_DRDY_STATUS_DATA_NOT_READY = ( 0U << 7U ), /*!< DRDY_STATUS data not ready */
INTERRUPT_DRDY_DRDY_STATUS_DATA_READY = ( 1U << 7U ) /*!< DRDY_STATUS data ready */
} HDC2080_interrupt_drdy_drdy_status_t;
/* TH_STATUS <6>
* NOTE: Temperature threshold HIGH Interrupt status. TH_STATUS is cleared to 0 when read.
*/
typedef enum {
INTERRUPT_DRDY_TH_STATUS_MASK = ( 1U << 6U ), /*!< TH_STATUS mask */
INTERRUPT_DRDY_TH_STATUS_NO_INTERRUPT = ( 0U << 6U ), /*!< No interrupt */
INTERRUPT_DRDY_TH_STATUS_INTERRUPT = ( 1U << 6U ) /*!< Interrupt */
} HDC2080_interrupt_drdy_th_status_t;
/* TL_STATUS <5>
* NOTE: Temperature threshold LOW Interrupt status. TL_STATUS is cleared to 0 when read.
*/
typedef enum {
INTERRUPT_DRDY_TL_STATUS_MASK = ( 1U << 5U ), /*!< TL_STATUS mask */
INTERRUPT_DRDY_TL_STATUS_NO_INTERRUPT = ( 0U << 5U ), /*!< No interrupt */
INTERRUPT_DRDY_TL_STATUS_INTERRUPT = ( 1U << 5U ) /*!< Interrupt */
} HDC2080_interrupt_drdy_tl_status_t;
/* HH_STATUS <4>
* NOTE: Humidity threshold HIGH Interrupt status. HH_STATUS is cleared to 0 when read.
*/
typedef enum {
INTERRUPT_DRDY_HH_STATUS_MASK = ( 1U << 4U ), /*!< HH_STATUS mask */
INTERRUPT_DRDY_HH_STATUS_NO_INTERRUPT = ( 0U << 4U ), /*!< No interrupt */
INTERRUPT_DRDY_HH_STATUS_INTERRUPT = ( 1U << 4U ) /*!< Interrupt */
} HDC2080_interrupt_drdy_hh_status_t;
/* HL_STATUS <3>
* NOTE: Humidity threshold LOW Interrupt status. HL_STATUS is cleared to 0 when read.
*/
typedef enum {
INTERRUPT_DRDY_HL_STATUS_MASK = ( 1U << 3U ), /*!< HL_STATUS mask */
INTERRUPT_DRDY_HL_STATUS_NO_INTERRUPT = ( 0U << 3U ), /*!< No interrupt */
INTERRUPT_DRDY_HL_STATUS_INTERRUPT = ( 1U << 3U ) /*!< Interrupt */
} HDC2080_interrupt_drdy_hl_status_t;
/**
* @brief INTERRUPT CONFIGURATION REGISTER
*/
/* DRDY_STATUS <7>
* NOTE: DataReady interrupt enable.
*/
typedef enum {
INTERRUPT_DRDY_DRDY_ENABLE_MASK = ( 1U << 7U ), /*!< DRDY_ENABLE mask */
INTERRUPT_DRDY_DRDY_ENABLE_INTERRUPT_DISABLE = ( 0U << 7U ), /*!< DRDY_ENABLE interrupt disable */
INTERRUPT_DRDY_DRDY_ENABLE_INTERRUPT_ENABLE = ( 1U << 7U ) /*!< DRDY_ENABLE interrupt enable */
} HDC2080_interrupt_enable_drdy_enable_t;
/* TH_ENABLE <6>
* NOTE: Temperature threshold HIGH Interrupt enable.
*/
typedef enum {
INTERRUPT_DRDY_TH_ENABLE_MASK = ( 1U << 6U ), /*!< TH_ENABLE mask */
INTERRUPT_DRDY_TH_ENABLE_INTERRUPT_DISABLE = ( 0U << 6U ), /*!< Interrupt disable */
INTERRUPT_DRDY_TH_ENABLE_INTERRUPT_ENABLE = ( 1U << 6U ), /*!< Interrupt enable */
} HDC2080_interrupt_enable_th_enable_t;
/* TL_ENABLE <5>
* NOTE: Temperature threshold LOW Interrupt enable.
*/
typedef enum {
INTERRUPT_DRDY_TL_ENABLE_MASK = ( 1U << 5U ), /*!< TL_ENABLE mask */
INTERRUPT_DRDY_TL_ENABLE_INTERRUPT_DISABLE = ( 0U << 5U ), /*!< Interrupt disable */
INTERRUPT_DRDY_TL_ENABLE_INTERRUPT_ENABLE = ( 1U << 5U ), /*!< Interrupt enable */
} HDC2080_interrupt_enable_tl_enable_t;
/* HH_ENABLE <4>
* NOTE: Humidity threshold HIGH Interrupt enable.
*/
typedef enum {
INTERRUPT_DRDY_HH_ENABLE_MASK = ( 1U << 4U ), /*!< HH_ENABLE mask */
INTERRUPT_DRDY_HH_ENABLE_INTERRUPT_DISABLE = ( 0U << 4U ), /*!< Interrupt disable */
INTERRUPT_DRDY_HH_ENABLE_INTERRUPT_ENABLE = ( 1U << 4U ), /*!< Interrupt enable */
} HDC2080_interrupt_enable_hh_enable_t;
/* HL_ENABLE <3>
* NOTE: Humidity threshold LOW Interrupt enable.
*/
typedef enum {
INTERRUPT_DRDY_HL_ENABLE_MASK = ( 1U << 3U ), /*!< HL_ENABLE mask */
INTERRUPT_DRDY_HL_ENABLE_INTERRUPT_DISABLE = ( 0U << 3U ), /*!< Interrupt disable */
INTERRUPT_DRDY_HL_ENABLE_INTERRUPT_ENABLE = ( 1U << 3U ), /*!< Interrupt enable */
} HDC2080_interrupt_enable_hl_enable_t;
/**
* @brief TEMP_OFFSET_ADJUST REGISTER
* NOTE: Temperature offset adjustment. Added to the converted temperature value.
*/
typedef enum {
TEMP_OFFSET_ADJUST_MASK = 0xFF, /*!< TEMP_OFFSET_ADJUST mask */
TEMP_OFFSET_ADJUST_MINUS_20_62_C = ( 1U << 7U ), /*!< TEMP_OFFSET_ADJUST: –20.62°C */
TEMP_OFFSET_ADJUST_10_32_C = ( 1U << 6U ), /*!< TEMP_OFFSET_ADJUST: 10.32°C */
TEMP_OFFSET_ADJUST_5_16_C = ( 1U << 5U ), /*!< TEMP_OFFSET_ADJUST: 5.16°C */
TEMP_OFFSET_ADJUST_2_58_C = ( 1U << 4U ), /*!< TEMP_OFFSET_ADJUST: 2.58°C */
TEMP_OFFSET_ADJUST_1_28_C = ( 1U << 3U ), /*!< TEMP_OFFSET_ADJUST: 1.28°C */
TEMP_OFFSET_ADJUST_0_64_C = ( 1U << 2U ), /*!< TEMP_OFFSET_ADJUST: 0.64°C */
TEMP_OFFSET_ADJUST_0_32_C = ( 1U << 1U ), /*!< TEMP_OFFSET_ADJUST: 0.32°C */
TEMP_OFFSET_ADJUST_0_16_C = ( 1U << 0U ) /*!< TEMP_OFFSET_ADJUST: 0.16°C */
} HDC2080_temp_offset_adjust_t;
/**
* @brief HUM_OFFSET_ADJUST REGISTER
* NOTE: Humidity offset adjustment. Added to the converted Humidity value.
*/
typedef enum {
HUM_OFFSET_ADJUST_MASK = 0xFF, /*!< HUM_OFFSET_ADJUST mask */
HUM_OFFSET_ADJUST_MINUS_25_RH = ( 1U << 7U ), /*!< HUM_OFFSET_ADJUST: –25 %RH */
HUM_OFFSET_ADJUST_12_5_RH = ( 1U << 6U ), /*!< HUM_OFFSET_ADJUST: 12.5 %RH */
HUM_OFFSET_ADJUST_6_3_RH = ( 1U << 5U ), /*!< HUM_OFFSET_ADJUST: 6.3 %RH */
HUM_OFFSET_ADJUST_3_1_RH = ( 1U << 4U ), /*!< HUM_OFFSET_ADJUST: 3.1 %RH */
HUM_OFFSET_ADJUST_1_6_RH = ( 1U << 3U ), /*!< HUM_OFFSET_ADJUST: 1.6 %RH */
HUM_OFFSET_ADJUST_0_8_RH = ( 1U << 2U ), /*!< HUM_OFFSET_ADJUST: 0.8 %RH */
HUM_OFFSET_ADJUST_0_4_RH = ( 1U << 1U ), /*!< HUM_OFFSET_ADJUST: 0.4 %RH */
HUM_OFFSET_ADJUST_0_2_RH = ( 1U << 0U ) /*!< HUM_OFFSET_ADJUST: 0.2 %RH */
} HDC2080_hum_offset_adjust_t;
/**
* @brief RESET_DRDY_INT_CONF REGISTER
*/
/* SOFT_RES <7>
* NOTE: EEPROM value reload and registers reset.
*/
typedef enum {
RESET_DRDY_INT_CONF_SOFT_RES_MASK = ( 1U << 7U ), /*!< SOFT_RES mask */
RESET_DRDY_INT_CONF_SOFT_RES_NORMAL = ( 0U << 7U ), /*!< Normal Operation mode, this bit is self-clear */
RESET_DRDY_INT_CONF_SOFT_RES_RESET = ( 1U << 7U ) /*!< Soft Reset */
} HDC2080_reset_drdy_int_conf_soft_res_t;
/* AMM <6:4>
* NOTE: EEPROM value reload and registers reset.
*/
typedef enum {
RESET_DRDY_INT_CONF_AMM_MASK = ( 0b111 << 4U ), /*!< AMM mask */
RESET_DRDY_INT_CONF_AMM_DISABLED = ( 0b000 << 4U ), /*!< Disabled. Initiate measurement via I2C */
RESET_DRDY_INT_CONF_AMM_0_008_HZ = ( 0b001 << 4U ), /*!< 1/120Hz (1 samples every 2 minutes) */
RESET_DRDY_INT_CONF_AMM_0_017_HZ = ( 0b010 << 4U ), /*!< 1/60Hz (1 samples every minute) */
RESET_DRDY_INT_CONF_AMM_0_1_HZ = ( 0b011 << 4U ), /*!< 0.1Hz (1 samples every 10 seconds) */
RESET_DRDY_INT_CONF_AMM_0_2_HZ = ( 0b100 << 4U ), /*!< 0.2 Hz (1 samples every 5 second) */
RESET_DRDY_INT_CONF_AMM_1_HZ = ( 0b101 << 4U ), /*!< 1Hz (1 samples every second) */
RESET_DRDY_INT_CONF_AMM_2_HZ = ( 0b110 << 4U ), /*!< 2Hz (2 samples every second) */
RESET_DRDY_INT_CONF_AMM_5_HZ = ( 0b111 << 4U ) /*!< 5Hz (5 samples every second) */
} HDC2080_reset_drdy_int_conf_amm_t;
/* HEAT_EN <3>
* NOTE: N/A.
*/
typedef enum {
RESET_DRDY_INT_CONF_HEAT_EN_MASK = ( 1U << 3U ), /*!< HEAT_EN mask */
RESET_DRDY_INT_CONF_HEAT_EN_OFF = ( 0U << 3U ), /*!< Heater off */
RESET_DRDY_INT_CONF_HEAT_EN_ON = ( 1U << 3U ) /*!< Heater on */
} HDC2080_reset_drdy_int_conf_heat_en_t;
/* DRDY/INT_EN <2>
* NOTE: DRDY/INT_EN pin configuration.
*/
typedef enum {
RESET_DRDY_INT_CONF_DRDY_INT_EN_MASK = ( 1U << 2U ), /*!< DRDY/INT_EN mask */
RESET_DRDY_INT_CONF_DRDY_INT_EN_HIGH_Z = ( 0U << 2U ), /*!< High Z */
RESET_DRDY_INT_CONF_DRDY_INT_EN_ENABLED = ( 1U << 2U ) /*!< Enable */
} HDC2080_reset_drdy_int_conf_drdr_int_en_t;
/* INT_POL <1>
* NOTE: Interrupt polarity.
*/
typedef enum {
RESET_DRDY_INT_CONF_INT_POL_MASK = ( 1U << 1U ), /*!< INT_POL mask */
RESET_DRDY_INT_CONF_INT_POL_ACTIVE_LOW = ( 0U << 1U ), /*!< Active Low */
RESET_DRDY_INT_CONF_INT_POL_ACTIVE_HIGH = ( 1U << 1U ) /*!< Active High */
} HDC2080_reset_drdy_int_conf_int_pol_t;
/* INT_MODE <0>
* NOTE: Interrupt mode.
*/
typedef enum {
RESET_DRDY_INT_CONF_INT_MODE_MASK = ( 1U << 0U ), /*!< INT_MODE mask */
RESET_DRDY_INT_CONF_INT_MODE_LEVEL_SENSITIVE = ( 0U << 0U ), /*!< Level sensitive */
RESET_DRDY_INT_CONF_INT_MODE_COMPARATOR_MODE = ( 1U << 0U ) /*!< Comparator mode */
} HDC2080_reset_drdy_int_conf_int_mode_t;
/**
* @brief MEASUREMENT CONFIGURATION REGISTER
*/
/* TRES <7:6>
* NOTE: Temperature resolution.
*/
typedef enum {
MEASUREMENT_CONF_TRES_MASK = ( 0b11 << 6U ), /*!< TRES mask */
MEASUREMENT_CONF_TRES_14_BIT = ( 0b00 << 6U ), /*!< 14 bit */
MEASUREMENT_CONF_TRES_11_BIT = ( 0b01 << 6U ), /*!< 11 bit */
MEASUREMENT_CONF_TRES_9_BIT = ( 0b10 << 6U ) /*!< 9 bit */
} HDC2080_measurement_configuration_tres_t;
/* HRES <5:4>
* NOTE: Humidity resolution.
*/
typedef enum {
MEASUREMENT_CONF_HRES_MASK = ( 0b11 << 4U ), /*!< HRES mask */
MEASUREMENT_CONF_HRES_14_BIT = ( 0b00 << 4U ), /*!< 14 bit */
MEASUREMENT_CONF_HRES_11_BIT = ( 0b01 << 4U ), /*!< 11 bit */
MEASUREMENT_CONF_HRES_9_BIT = ( 0b10 << 4U ) /*!< 9 bit */
} HDC2080_measurement_configuration_hres_t;
/* MEAS_CONF <2:1>
* NOTE: Measurement configuration.
*/
typedef enum {
MEASUREMENT_CONF_MEAS_CONF_MASK = ( 0b11 << 1U ), /*!< MEAS_CONF mask */
MEASUREMENT_CONF_MEAS_CONF_HUMIDITY_TEMPERATURE = ( 0b00 << 1U ), /*!< Humidity + Temperature */
MEASUREMENT_CONF_MEAS_CONF_TEMPERATURE_ONLY = ( 0b01 << 1U ) /*!< Temperature only */
} HDC2080_measurement_configuration_meas_conf_t;
/* MEAS_TRIG <0>
* NOTE: Self-clearing bit when measurement completed.
*/
typedef enum {
MEASUREMENT_CONF_MEAS_TRIG_MASK = ( 1U << 0U ), /*!< MEAS_TRIG mask */
MEASUREMENT_CONF_MEAS_TRIG_NO_ACTION = ( 0U << 0U ), /*!< no action */
MEASUREMENT_CONF_MEAS_TRIG_START_MEASUREMENT = ( 1U << 0U ) /*!< Start measurement */
} HDC2080_measurement_configuration_meas_trig_t;
/**
* @brief MANUFACTURER ID REGISTERS
*/
typedef enum {
MANUFACTURER_ID_LOW = 0x49, /*!< MANUFACTURER ID low */
MANUFACTURER_ID_HIGH = 0x54 /*!< MANUFACTURER ID high */
} HDC2080_manufacturer_ids_t;
/**
* @brief DEVICE ID REGISTERS
*/
typedef enum {
DEVICE_ID_LOW = 0xD0, /*!< DEVICE ID low */
DEVICE_ID_HIGH = 0x07 /*!< DEVICE ID high */
} HDC2080_device_ids_t;
#ifndef HDC2080_VECTOR_STRUCT_H
#define HDC2080_VECTOR_STRUCT_H
typedef struct {
/* Output registers */
uint16_t rawHumidity; /*!< Raw humidity */
uint16_t rawTemperature; /*!< Raw temperature */
float humidity; /*!< Humidity value */
float temperature; /*!< Temperature value */
uint8_t rawTemperature_max; /*!< Raw temperature max */
uint8_t rawHumidity_max; /*!< Raw humidity max */
/* Offsets */
uint8_t temp_offset_adjust; /*!< Temperature offset */
uint8_t hum_offset_adjust; /*!< Humidity offset */
/* Interrupt DRDY Field Descriptions */
uint8_t interrupt_drdy_status; /*!< Interrupt DRDY status */
/* Interrupt Configuration Field Descriptions */
HDC2080_interrupt_enable_drdy_enable_t drdy_enable; /*!< DataReady Interrupt enable */
HDC2080_interrupt_enable_th_enable_t th_enable; /*!< Temperature threshold HIGH Interrupt enable */
HDC2080_interrupt_enable_tl_enable_t tl_enable; /*!< Temperature threshold LOW Interrupt enable */
HDC2080_interrupt_enable_hh_enable_t hh_enable; /*!< Humidity threshold HIGH Interrupt enable */
HDC2080_interrupt_enable_hl_enable_t hl_enable; /*!< Humidity threshold LOW Interrupt enable */
/* Thresholds */
uint8_t temp_thres_low; /*!< Temperature threshold low */
uint8_t temp_thres_high; /*!< Temperature threshold low */
uint8_t hum_thres_low; /*!< Humidity threshold low */
uint8_t hum_thres_high; /*!< Humidity threshold low */
/* Configuration Field Descriptions */
HDC2080_reset_drdy_int_conf_soft_res_t soft_res; /*!< Soft reset flag */
HDC2080_reset_drdy_int_conf_amm_t amm; /*!< Auto Measurement Mode */
HDC2080_reset_drdy_int_conf_heat_en_t heater_en; /*!< Heater Mode */
HDC2080_reset_drdy_int_conf_drdr_int_en_t drdy_intEn; /*!< DRDY/INT_EN pin configuration */
HDC2080_reset_drdy_int_conf_int_pol_t int_pol; /*!< Interrupt polarity */
HDC2080_reset_drdy_int_conf_int_mode_t int_mode; /*!< Interrupt mode */
/* Measurement Configuration Field Descriptions */
HDC2080_measurement_configuration_tres_t tres; /*!< Temperature resolution */
HDC2080_measurement_configuration_hres_t hres; /*!< Humidity resolution */
HDC2080_measurement_configuration_meas_conf_t meas_conf; /*!< Measurement configuration */
HDC2080_measurement_configuration_meas_trig_t meas_trig; /*!< Measurement trigger */
/* Device identifications */
uint16_t manufacturer_id; /*!< Manufacturer ID */
uint16_t device_id; /*!< Device ID */
} HDC2080_data_t;
#endif
/**
* @brief INTERNAL CONSTANTS
*/
typedef enum {
HDC2080_SUCCESS = 0U, /*!< I2C communication success */
HDC2080_FAILURE = 1U, /*!< I2C communication failure */
I2C_SUCCESS = 0U /*!< I2C communication was fine */
} HDC2080_status_t;
/** Create an HDC2080 object connected to the specified I2C pins.
*
* @param sda I2C data pin
* @param scl I2C clock pin
* @param addr I2C slave address
* @param freq I2C frequency
*/
HDC2080 ( PinName sda, PinName scl, uint32_t addr, uint32_t freq );
/** Delete HDC2080 object.
*/
~HDC2080();
/** It gets the raw temperature.
*/
HDC2080_status_t HDC2080_GetRawTemperature ( HDC2080_data_t* myRawTemperature );
/** It gets the current temperature.
*/
HDC2080_status_t HDC2080_GetTemperature ( HDC2080_data_t* myTemperature );
/** It gets the raw humidity.
*/
HDC2080_status_t HDC2080_GetRawHumidity ( HDC2080_data_t* myRawHumidity );
/** It gets the current humidity.
*/
HDC2080_status_t HDC2080_GetHumidity ( HDC2080_data_t* myHumidity );
/** It gets the interrupt DRDY status.
*/
HDC2080_status_t HDC2080_GetInterrupt_DRDY_Status ( HDC2080_data_t* myStatus );
/** It writes the temperature max register ( raw value ).
*/
HDC2080_status_t HDC2080_ConfTemperatureMax ( HDC2080_data_t myTemperatureMax );
/** It writes the humidity max register ( raw value ).
*/
HDC2080_status_t HDC2080_ConfHumidityMax ( HDC2080_data_t myHumidityMax );
/** It sets the interrupt configuration.
*/
HDC2080_status_t HDC2080_SetInterruptConfiguration ( HDC2080_data_t myIntConfiguration );
/** It gets the interrupt configuration.
*/
HDC2080_status_t HDC2080_GetInterruptConfiguration ( HDC2080_data_t* myIntConfiguration );
/** It sets the temperature offset.
*/
HDC2080_status_t HDC2080_SetTemperatureOffset ( HDC2080_data_t myTemperatureOffset );
/** It gets the temperature offset ( raw value ).
*/
HDC2080_status_t HDC2080_GetTemperatureOffset ( HDC2080_data_t* myTemperatureOffset );
/** It sets the humidity offset.
*/
HDC2080_status_t HDC2080_SetHumidityOffset ( HDC2080_data_t myHumidityOffset );
/** It gets the humidity offset ( raw value ).
*/
HDC2080_status_t HDC2080_GetHumidityOffset ( HDC2080_data_t* myHumidityOffset );
/** It sets the temperature threshold low value ( raw value ).
*/
HDC2080_status_t HDC2080_SetTemperatureThresLow ( HDC2080_data_t myTempThresLow );
/** It gets the temperature threshold low value ( raw value ).
*/
HDC2080_status_t HDC2080_GetTemperatureThresLow ( HDC2080_data_t* myTempThresLow );
/** It sets the temperature threshold high value ( raw value ).
*/
HDC2080_status_t HDC2080_SetTemperatureThresHigh ( HDC2080_data_t myTempThresLow );
/** It gets the temperature threshold high value ( raw value ).
*/
HDC2080_status_t HDC2080_GetTemperatureThresHigh ( HDC2080_data_t* myTempThresHigh );
/** It sets the humidity threshold low value ( raw value ).
*/
HDC2080_status_t HDC2080_SetHumidityThresLow ( HDC2080_data_t myHumThresLow );
/** It gets the humidity threshold low value ( raw value ).
*/
HDC2080_status_t HDC2080_GetHumidityThresLow ( HDC2080_data_t* myHumThresLow );
/** It sets the humidity threshold high value ( raw value ).
*/
HDC2080_status_t HDC2080_SetHumidityThresHigh ( HDC2080_data_t myHumThresLow );
/** It gets the humidity threshold high value ( raw value ).
*/
HDC2080_status_t HDC2080_GetHumidityThresHigh ( HDC2080_data_t* myHumThresLow );
/** It makes a soft reset.
*/
HDC2080_status_t HDC2080_SetSoftReset ( void );
/** It checks the soft reset flag.
*/
HDC2080_status_t HDC2080_GetSoftReset ( HDC2080_data_t* mySoftResetFlag );
/** It sets auto measurement mode ( AMM ).
*/
HDC2080_status_t HDC2080_SetAutoMeasurementMode ( HDC2080_data_t myAMM );
/** It gets auto measurement mode ( AMM ).
*/
HDC2080_status_t HDC2080_GetAutoMeasurementMode ( HDC2080_data_t* myAMM );
/** It sets the heater.
*/
HDC2080_status_t HDC2080_SetHeaterMode ( HDC2080_data_t myHeatEn );
/** It gets the heater status.
*/
HDC2080_status_t HDC2080_GetHeaterMode ( HDC2080_data_t* myHeatEn );
/** It sets the DRDY/INT_EN pin configuration.
*/
HDC2080_status_t HDC2080_SetPinConfifuration ( HDC2080_data_t myPinConfiguration );
/** It gets the DRDY/INT_EN pin configuration.
*/
HDC2080_status_t HDC2080_GetPinConfiguration ( HDC2080_data_t* myPinConfiguration );
/** It sets the interrupt polarity.
*/
HDC2080_status_t HDC2080_SetInterruptPolarity ( HDC2080_data_t myIntPol );
/** It gets the interrupt polarity.
*/
HDC2080_status_t HDC2080_GetInterruptPolarity ( HDC2080_data_t* myIntPol );
/** It sets the interrupt mode.
*/
HDC2080_status_t HDC2080_SetInterruptMode ( HDC2080_data_t myIntMode );
/** It gets the interrupt mode.
*/
HDC2080_status_t HDC2080_GetInterruptMode ( HDC2080_data_t* myIntMode );
/** It sets the measurement configuration.
*/
HDC2080_status_t HDC2080_SetMeasurementConf ( HDC2080_data_t myMeasConf );
/** It gets the measurement configuration.
*/
HDC2080_status_t HDC2080_GetMeasurementConf ( HDC2080_data_t* myMeasConf );
/** It triggers a new measurement.
*/
HDC2080_status_t HDC2080_StartMeasurementTrigger ( void );
/** It gets the measurement trigger flag.
*/
HDC2080_status_t HDC2080_GetMeasurementTrigger ( HDC2080_data_t* myMeasTrig );
/** It gets the manufacturer ID.
*/
HDC2080_status_t HDC2080_GetManufacturerID ( HDC2080_data_t* myManufacturerID );
/** It gets the device ID.
*/
HDC2080_status_t HDC2080_GetDeviceID ( HDC2080_data_t* myDeviceID );
private:
I2C _i2c;
uint32_t _HDC2080_Addr;
};
#endif