Diff: BM1383AGLV.h

Revision:

1:49d8e4da0b7c

Parent:

0:b7e485d0c51d

Child:

2:4aa16ca14915

diff -r b7e485d0c51d -r 49d8e4da0b7c BM1383AGLV.h
--- a/BM1383AGLV.h	Wed Oct 02 11:34:56 2019 +0000
+++ b/BM1383AGLV.h	Wed Oct 02 11:39:53 2019 +0000
@@ -0,0 +1,263 @@
+/**
+ * @brief       BM1383AGLV.h
+ * @details     Pressure Sensor IC.
+ *              Header file.
+ *
+ *
+ * @return      N/A
+ *
+ * @author      Manuel Caballero
+ * @date        02/October/2019
+ * @version     02/October/2019    The ORIGIN
+ * @pre         N/A.
+ * @warning     N/A
+ * @pre         This code belongs to AqueronteBlog ( http://unbarquero.blogspot.com ). All rights reserved.
+ */
+#ifndef BM1383AGLV_H
+#define BM1383AGLV_H
+
+#include "mbed.h"
+
+
+/**
+    Example:
+@code
+
+@endcode
+*/
+
+
+/*!
+ Library for the BM1383AGLV Pressure Sensor IC.
+*/
+class BM1383AGLV
+{
+public:
+    /**
+    * @brief   DEFAULT ADDRESS
+    */
+    typedef enum {
+        BM1383AGLV_ADDRESS     =   0b1011101          /*!<   I2C slave address byte                       */
+    } BM1383AGLV_address_t;
+
+
+
+    /**
+      * @brief   REGISTERS
+      */
+    typedef enum {
+        BM1383AGLV_ID1             =   0x0F,           /*!<  Device ID1                                    */
+        BM1383AGLV_ID2             =   0x10,           /*!<  Device ID2                                    */
+        BM1383AGLV_POWER_DOWN      =   0x12,           /*!<  Power down register                           */
+        BM1383AGLV_RESET           =   0x13,           /*!<  Reset register                                */
+        BM1383AGLV_MODE_CONTROL    =   0x14,           /*!<  Mode control register                         */
+        BM1383AGLV_STATUS          =   0x19,           /*!<  Status register                               */
+        BM1383AGLV_PRESSURE_MSB    =   0x1A,           /*!<  Pressure data (MSB)                           */
+        BM1383AGLV_PRESSURE_LSB    =   0x1B,           /*!<  Pressure data (LSB)                           */
+        BM1383AGLV_PRESSURE_XLSB   =   0x1C,           /*!<  Pressure data (XLSB)                          */
+        BM1383AGLV_TEMPERATURE_MSB =   0x1D,           /*!<  Temperature data (MSB)                        */
+        BM1383AGLV_TEMPERATURE_LSB =   0x1E            /*!<  Temperature data (LSB)                        */
+    } BM1383AGLV_registers_t;
+
+
+
+    /**
+      * @brief   ID REGISTERS
+      */
+    typedef enum {
+        ID_ID1              =   0xE0,                       /*!<  ID1 value                                 */
+        ID_ID2              =   0x32                        /*!<  ID2 value                                 */
+    } BM1383AGLV_id_t;
+
+
+
+    /**
+      * @brief   POWER_DOWN REGISTER
+      */
+    /* PWR_DOWN <0>
+     *    NOTE: Power down or active mode.
+     */
+    typedef enum {
+        POWER_DOWN_PWR_DOWN_MASK        =   ( 1U << 0U ),    /*!<  POWER_DOWN mask                                  */
+        POWER_DOWN_PWR_DOWN_POWER_DOWN  =   ( 0U << 0U ),    /*!<  Power down                           [ Default ] */
+        POWER_DOWN_PWR_DOWN_ACTIVE      =   ( 1U << 0U )     /*!<  Active                                           */
+    } BM1383AGLV_power_down_pwr_down_t;
+
+
+    /**
+      * @brief   RESET REGISTER
+      */
+    /* RSTB <0>
+     *    NOTE: N/A.
+     */
+    typedef enum {
+        RESET_RSTB_MASK                 =   ( 1U << 0U ),    /*!<  RSTB mask                                        */
+        RESET_RSTB_RESET                =   ( 0U << 0U ),    /*!<  Measurement control block is reset   [ Default ] */
+        RESET_RSTB_ACTIVE               =   ( 1U << 0U )     /*!<  Measurement control block is active              */
+    } BM1383AGLV_reset_rstb_t;
+
+
+
+    /**
+      * @brief   MODE_CONTROL REGISTER
+      */
+    /* AVE_NUM <7:5>
+     *    NOTE: Set the average number of measurement data.
+     */
+    typedef enum {
+        MODE_CONTROL_AVE_NUM_MASK       =   ( 0b111 << 5U ), /*!<  AVE_NUM mask                                     */
+        MODE_CONTROL_AVE_NUM_SINGLE     =   ( 0b000 << 5U ), /*!<  AVE_NUM: Single                                  */
+        MODE_CONTROL_AVE_NUM_AVERAGE_2  =   ( 0b001 << 5U ), /*!<  AVE_NUM: Average of  2 times         [ Default ] */
+        MODE_CONTROL_AVE_NUM_AVERAGE_4  =   ( 0b010 << 5U ), /*!<  AVE_NUM: Average of  4 times                     */
+        MODE_CONTROL_AVE_NUM_AVERAGE_8  =   ( 0b011 << 5U ), /*!<  AVE_NUM: Average of  8 times                     */
+        MODE_CONTROL_AVE_NUM_AVERAGE_16 =   ( 0b100 << 5U ), /*!<  AVE_NUM: Average of 16 times                     */
+        MODE_CONTROL_AVE_NUM_AVERAGE_32 =   ( 0b101 << 5U ), /*!<  AVE_NUM: Average of 32 times                     */
+        MODE_CONTROL_AVE_NUM_AVERAGE_64 =   ( 0b110 << 5U )  /*!<  AVE_NUM: Average of 64 times                     */
+    } BM1383AGLV_mode_control_ave_num_t;
+
+
+    /* DREN <4>
+     *    NOTE: DRDY pin Enable.
+     */
+    typedef enum {
+        MODE_CONTROL_DREN_MASK          =   ( 1U << 4U ),   /*!<  DREN mask                                         */
+        MODE_CONTROL_DREN_DRDY_DISABLE  =   ( 0U << 4U ),   /*!<  DRDY pin Disable                      [ Default ] */
+        MODE_CONTROL_DREN_DRDY_ENABLE   =   ( 1U << 4U )    /*!<  DRDY pin Enable                                   */
+    } BM1383AGLV_mode_control_dren_t;
+
+
+    /* MODE <1:0>
+     *    NOTE: Set measurement mode.
+     */
+    typedef enum {
+        MODE_CONTROL_MODE_MASK          =   ( 0b11 << 0U ), /*!<  MODE mask                                        */
+        MODE_CONTROL_MODE_STAND_BY      =   ( 0b00 << 0U ), /*!<  Stand by                             [ Default ] */
+        MODE_CONTROL_MODE_ONE_SHOT      =   ( 0b01 << 0U ), /*!<  One shot                                         */
+        MODE_CONTROL_MODE_CONTINUOUS    =   ( 0b10 << 0U )  /*!<  Continuous                                       */
+    } BM1383AGLV_mode_control_mode_t;
+
+
+    /**
+      * @brief   STATUS REGISTER
+      */
+    /* RD_DRDY <0>
+     *    NOTE: Pressure and temperature measurement data ready bit.
+     */
+    typedef enum {
+        STATUS_RD_DRDY_MASK             =   ( 1U << 0U ),    /*!<  RD_DRDY mask                                                         */
+        STATUS_RD_DRDY_DATA_MEASURING   =   ( 0U << 0U ),    /*!<  Measurement data output is not yet available (measuring) [ Default ] */
+        STATUS_RD_DRDY_DATA_AVAILABLE   =   ( 1U << 0U )     /*!<  Measurement data output is available                                 */
+    } BM1383AGLV_reset_rd_drdy_t;
+
+
+
+
+
+#ifndef BM1383AGLV_VECTOR_STRUCT_H
+#define BM1383AGLV_VECTOR_STRUCT_H
+    typedef struct {
+        /* Output registers  */
+        int32_t rawPressure;                            /*!<  Raw pressure                  */
+        int16_t rawTemperature;                         /*!<  Raw temperature               */
+
+        float   pressure;                               /*!<  Pressure value                */
+        float   temperature;                            /*!<  Temperature value             */
+
+        /* Mode control  */
+        BM1383AGLV_mode_control_ave_num_t ave_num;      /*!<  Average number of measurement */
+        BM1383AGLV_mode_control_dren_t    dren;         /*!<  DRDY pin Enable               */
+        BM1383AGLV_mode_control_mode_t    mode;         /*!<  Set measurement mode          */
+
+        /* Device status     */
+        BM1383AGLV_power_down_pwr_down_t pwr_down;      /*!<  Power mode                    */
+        BM1383AGLV_reset_rstb_t          rstb;          /*!<  Reset                         */
+        BM1383AGLV_reset_rd_drdy_t       rd_drdy;       /*!<  Status flag                   */
+
+        /* Device identification   */
+        uint8_t id1;                                    /*!<  Device ID1                    */
+        uint8_t id2;                                    /*!<  Device ID2                    */
+    } BM1383AGLV_data_t;
+#endif
+
+
+    /**
+      * @brief   INTERNAL CONSTANTS
+      */
+    typedef enum {
+        BM1383AGLV_SUCCESS  =   0U,                     /*!<  I2C communication success     */
+        BM1383AGLV_FAILURE  =   1U,                     /*!<  I2C communication failure     */
+        I2C_SUCCESS         =   0U                      /*!<  I2C communication was fine    */
+    } BM1383AGLV_status_t;
+
+
+
+
+    /** Create an BM1383AGLV object connected to the specified I2C pins.
+      *
+      * @param sda     I2C data pin
+      * @param scl     I2C clock pin
+      * @param addr    I2C slave address
+      * @param freq    I2C frequency
+      */
+    BM1383AGLV ( PinName sda, PinName scl, uint32_t addr, uint32_t freq );
+
+    /** Delete BM1383AGLV object.
+     */
+    ~BM1383AGLV();
+
+    /** It gets the device identifications.
+    */
+    BM1383AGLV_status_t BM1383AGLV_GetDeviceID        ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myDeviceID );
+
+    /** It sets the power-down mode.
+      */
+    BM1383AGLV_status_t BM1383AGLV_SetPowerDown       ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t myPwrDown   );
+
+    /** It gets the power-down mode.
+      */
+    BM1383AGLV_status_t BM1383AGLV_GetPowerDown       ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myPwrDown  );
+
+    /** It sets the soft-reset.
+      */
+    BM1383AGLV_status_t BM1383AGLV_SetSoftReset       ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t myRSTB      );
+
+    /** It gets the reset flag.
+      */
+    BM1383AGLV_status_t BM1383AGLV_GetSoftResetFlag   ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myRSTB     );
+
+    /** It sets the mode control.
+      */
+    BM1383AGLV_status_t BM1383AGLV_SetModeControl     ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t myModeCont  );
+
+    /** It gets the mode control.
+      */
+    BM1383AGLV_status_t BM1383AGLV_GetModeControl     ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myModeCont );
+
+    /** It gets the status flag.
+      */
+    BM1383AGLV_status_t BM1383AGLV_GetStatus          ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myRD_DRDY  );
+
+    /** It gets the raw pressure.
+      */
+    BM1383AGLV_status_t BM1383AGLV_GetRawPressure     ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myRawP     );
+
+    /** It gets the raw temperature.
+      */
+    BM1383AGLV_status_t BM1383AGLV_GetRawTemperature  ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myRawT     );
+
+    /** It gets the pressure.
+      */
+    BM1383AGLV_status_t BM1383AGLV_GetPressure        ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myP        );
+
+    /** It gets the temperature.
+      */
+    BM1383AGLV_status_t BM1383AGLV_GetTemperature     ( I2C_parameters_t myI2Cparameters, BM1383AGLV_data_t* myT        );
+
+
+
+private:
+    I2C         _i2c;
+    uint32_t    _BM1383AGLV_Addr;
+};
+
+#endif