![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Fork to see if I can get working
Dependencies: BufferedSerial OneWire WinbondSPIFlash libxDot-dev-mbed5-deprecated
Fork of xDotBridge_update_test20180823 by
Diff: xDotBridge/README.md
- Revision:
- 67:2115a2f1b945
- Parent:
- 62:9751a8504c82
diff -r bcaa6dbf538a -r 2115a2f1b945 xDotBridge/README.md --- a/xDotBridge/README.md Wed Mar 15 11:46:40 2017 -0600 +++ b/xDotBridge/README.md Tue Mar 21 13:04:31 2017 -0600 @@ -1,5 +1,5 @@ # xDotBridge Documentation {#mainpage} -# Introduction +## Introduction This project is intended to support multiple products including Wireless Bridge, MTS comm board, and camera comm board. The stretch goal of using a single binary and intuiting all the different configurations. At a minimum it @@ -87,29 +87,24 @@ TODO #### Brute force alert message -============================================== -= Offset | Size (in Bytes) | Name = -============================================== -= 0x00 | 2 Bytes | Alert Msg Flag (0xEF10) = -============================================== -= 0x02 | 8 Bytes | xDot EUI = -============================================== -= 0x0A | 2 Bytes | Alert Data = -============================================== -= 0x0C | 4 Bytes | Alert Sequence Number = -============================================== + + Offset | Size (in Bytes) | Name +------- | --------------- |----------------- + 0x00 | 2 Bytes | Alert Msg Flag (0xEF10) + 0x02 | 8 Bytes | xDot EUI + 0x0A | 2 Bytes | Alert Data + 0x0C | 4 Bytes | Alert Sequence Number + Total of 16 bytes #### Brute force pair request message -============================================== -= Offset | Size (in Bytes) | Name = -============================================== -= 0x00 | 2 Bytes | Pair Request Flag (0xFE01)= -============================================== -= 0x02 | 8 Bytes | xDot EUI (requester) = -============================================== -= 0x0A | 6 Bytes | Reserved = -============================================== + + Offset | Size (in Bytes) | Name +------- | --------------- |----------------- + 0x00 | 2 Bytes | Pair Request Flag (0xFE01) + 0x02 | 8 Bytes | xDot EUI (requester) + 0x0A | 6 Bytes | Reserved + * Total of 16 Bytes Ideas for reserved: @@ -117,21 +112,16 @@ * Messages generated #### Brute force pair accept message -============================================== -= Offset | Size (in Bytes) | Name = -============================================== -= 0x00 | 2 Bytes | Pair Accept Flag (0xFD02) = -============================================== -= 0x02 | 8 Bytes | xDot EUI (RX Master) = -============================================== -= 0x0A | 4 Bytes | Reserved for Frequency = -============================================== -= 0x0E | 4 Bytes | Network Address = -============================================== -= 0x12 | 16 Bytes | Network Session Key = -============================================== -= 0x22 | 16 Bytes | Data session Key = -============================================== + + Offset | Size (in Bytes) | Name +------- | --------------- | ----------------- + 0x00 | 2 Bytes | Pair Accept Flag (0xFD02) + 0x02 | 8 Bytes | xDot EUI (RX Master) + 0x0A | 4 Bytes | Reserved for Frequency + 0x0E | 4 Bytes | Network Address + 0x12 | 16 Bytes | Network Session Key + 0x22 | 16 Bytes | Data session Key + * Total of 34 Bytes ## Peer to Peer Pair @@ -192,44 +182,31 @@ * ULC ## Protocol Parameters -============================================== -= Dot Relative Addr | Size (in Bytes) | Name = -============================================== -= 0x1000 | 02 Bytes | Protocol Flag = -============================================== -= 0x1002 | 02 Bytes | Protocol Rev = -============================================== -= 0x1004 | 04 Bytes | Reserved for Frequency = -============================================== -= 0x1008 | 04 Bytes | Network Address = -============================================== -= 0x1010 | 16 Bytes | Network Session Key = -============================================== -= 0x1020 | 16 Bytes | Data Session Key = -============================================== -= 0x1030 | 02 Bytes | Logical Address Serial = -============================================== -= 0x1032 | 04 Bytes | Last Message SeqNum = -============================================== -Space needed is 54 bytes. Spaced used is 50 bytes + + Dot Relative Addr | Size (in Bytes) | Name + ----------------- | --------------- | --------- + 0x1000 | 02 Bytes | Protocol Flag + 0x1002 | 02 Bytes | Protocol Rev + 0x1004 | 04 Bytes | Reserved for Frequency + 0x1008 | 04 Bytes | Network Address + 0x1010 | 16 Bytes | Network Session Key + 0x1020 | 16 Bytes | Data Session Key + 0x1030 | 02 Bytes | Logical Address Serial + 0x1032 | 04 Bytes | Last Message SeqNum + +Space needed is 50 bytes. Spaced used is 54 bytes for better word alignment. ## IO Baseboard Parameters -============================================== -= Dot Relative Addr | Size (in Bytes) | Name = -============================================== -= 0x1100 | 2 Bytes | Baseboard Flag = -============================================== -= 0x1102 | 2 Bytes | Baseboard Rev = -============================================== -= 0x1104 | 2 Bytes | Baseboard Serial = -============================================== -= 0x1106 | 2 Bytes | Baseboard Configuration = -============================================== -= 0x1110 | 8 Bytes | PortEx0 64 bit ROM Addr = -============================================== -= 0x1118 | 8 Bytes | PortEx1 64 bit ROM Addr = -============================================== + + Dot Relative Addr | Size (in Bytes) | Name + ----------------- | --------------- | --------- + 0x1100 | 2 Bytes | Baseboard Flag + 0x1102 | 2 Bytes | Baseboard Rev + 0x1104 | 2 Bytes | Baseboard Serial + 0x1106 | 2 Bytes | Baseboard Configuration + 0x1110 | 8 Bytes | PortEx0 64 bit ROM Addr + 0x1118 | 8 Bytes | PortEx1 64 bit ROM Addr Space needed is 24 bytes. Space used is 32 bytes.