Matt Briggs
Fork to see if I can get working
Dependencies: BufferedSerial OneWire WinbondSPIFlash libxDot-dev-mbed5-deprecated
Fork of
xDotBridge_update_test20180823
by 
Matt Briggs
Diff: xDotBridge.doxyfile
- Revision:
- 70:6b3ca63792c2
- Parent:
- 67:2115a2f1b945
--- a/xDotBridge.doxyfile Fri Mar 24 08:15:37 2017 -0600 +++ b/xDotBridge.doxyfile Mon Mar 27 09:16:33 2017 -0600 @@ -24,7 +24,7 @@ # for the list of possible encodings. # The default value is: UTF-8. -DOXYFILE_ENCODING = UTF-8 +DOXYFILE_ENCODING = UTF-8 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by # double-quotes, unless you are using Doxywizard) that should identify the @@ -32,33 +32,33 @@ # title of most generated pages and in a few other places. # The default value is: My Project. -PROJECT_NAME = xDotBridge +PROJECT_NAME = xDotBridge # The PROJECT_NUMBER tag can be used to enter a project or revision number. This # could be handy for archiving the generated documentation or if some version # control system is used. -PROJECT_NUMBER = 0.2 +PROJECT_NUMBER = 0.2 # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer a # quick idea about the purpose of the project. Keep the description short. -PROJECT_BRIEF = +PROJECT_BRIEF = # With the PROJECT_LOGO tag one can specify a logo or an icon that is included # in the documentation. The maximum height of the logo should not exceed 55 # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy # the logo to the output directory. -PROJECT_LOGO = +PROJECT_LOGO = # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path # into which the generated documentation will be written. If a relative path is # entered, it will be relative to the location where doxygen was started. If # left blank the current directory will be used. -OUTPUT_DIRECTORY = DOC +OUTPUT_DIRECTORY = DOC # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- # directories (in 2 levels) under the output directory of each output format and @@ -68,7 +68,7 @@ # performance problems for the file system. # The default value is: NO. -CREATE_SUBDIRS = NO +CREATE_SUBDIRS = NO # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII @@ -76,7 +76,7 @@ # U+3044. # The default value is: NO. -ALLOW_UNICODE_NAMES = NO +ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this @@ -91,14 +91,14 @@ # Ukrainian and Vietnamese. # The default value is: English. -OUTPUT_LANGUAGE = English +OUTPUT_LANGUAGE = English # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. # The default value is: YES. -BRIEF_MEMBER_DESC = YES +BRIEF_MEMBER_DESC = YES # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief # description of a member or function before the detailed description @@ -107,7 +107,7 @@ # brief descriptions will be completely suppressed. # The default value is: YES. -REPEAT_BRIEF = YES +REPEAT_BRIEF = YES # This tag implements a quasi-intelligent brief description abbreviator that is # used to form the text in various listings. Each string in this list, if found @@ -118,24 +118,14 @@ # the entity):The $name class, The $name widget, The $name file, is, provides, # specifies, contains, represents, a, an and the. -ABBREVIATE_BRIEF = "The $name class" \ - "The $name widget" \ - "The $name file" \ - is \ - provides \ - specifies \ - contains \ - represents \ - a \ - an \ - the +ABBREVIATE_BRIEF = "The $name class" "The $name widget" "The $name file" is provides specifies contains represents a an the # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # doxygen will generate a detailed section even if there is only a brief # description. # The default value is: NO. -ALWAYS_DETAILED_SEC = NO +ALWAYS_DETAILED_SEC = NO # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all # inherited members of a class in the documentation of that class as if those @@ -143,14 +133,14 @@ # operators of the base classes will not be shown. # The default value is: NO. -INLINE_INHERITED_MEMB = NO +INLINE_INHERITED_MEMB = NO # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path # before files name in the file list and in the header files. If set to NO the # shortest path that makes the file name unique will be used # The default value is: YES. -FULL_PATH_NAMES = YES +FULL_PATH_NAMES = YES # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. # Stripping is only done if one of the specified strings matches the left-hand @@ -162,7 +152,7 @@ # will be relative from the directory where doxygen is started. # This tag requires that the tag FULL_PATH_NAMES is set to YES. -STRIP_FROM_PATH = +STRIP_FROM_PATH = # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the # path mentioned in the documentation of a class, which tells the reader which @@ -171,14 +161,14 @@ # specify the list of include paths that are normally passed to the compiler # using the -I flag. -STRIP_FROM_INC_PATH = +STRIP_FROM_INC_PATH = # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but # less readable) file names. This can be useful is your file systems doesn't # support long names like on DOS, Mac, or CD-ROM. # The default value is: NO. -SHORT_NAMES = NO +SHORT_NAMES = NO # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the # first line (until the first dot) of a Javadoc-style comment as the brief @@ -187,7 +177,7 @@ # description.) # The default value is: NO. -JAVADOC_AUTOBRIEF = NO +JAVADOC_AUTOBRIEF = NO # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If @@ -195,7 +185,7 @@ # requiring an explicit \brief command for a brief description.) # The default value is: NO. -QT_AUTOBRIEF = NO +QT_AUTOBRIEF = NO # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a # multi-line C++ special comment block (i.e. a block of //! or /// comments) as @@ -213,20 +203,20 @@ # documentation from any documented member that it re-implements. # The default value is: YES. -INHERIT_DOCS = YES +INHERIT_DOCS = YES # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new # page for each member. If set to NO, the documentation of a member will be part # of the file/class/namespace that contains it. # The default value is: NO. -SEPARATE_MEMBER_PAGES = NO +SEPARATE_MEMBER_PAGES = NO # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen # uses this value to replace tabs by spaces in code fragments. # Minimum value: 1, maximum value: 16, default value: 4. -TAB_SIZE = 4 +TAB_SIZE = 4 # This tag can be used to specify a number of aliases that act as commands in # the documentation. An alias has the form: @@ -238,13 +228,13 @@ # "Side Effects:". You can put \n's in the value part of an alias to insert # newlines. -ALIASES = +ALIASES = # This tag can be used to specify a number of word-keyword mappings (TCL only). # A mapping has the form "name=value". For example adding "class=itcl::class" # will allow you to use the command class in the itcl::class meaning. -TCL_SUBST = +TCL_SUBST = # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For @@ -252,7 +242,7 @@ # members will be omitted, etc. # The default value is: NO. -OPTIMIZE_OUTPUT_FOR_C = NO +OPTIMIZE_OUTPUT_FOR_C = NO # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or # Python sources only. Doxygen will then generate output that is more tailored @@ -260,19 +250,19 @@ # qualified scopes will look different, etc. # The default value is: NO. -OPTIMIZE_OUTPUT_JAVA = NO +OPTIMIZE_OUTPUT_JAVA = NO # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran # sources. Doxygen will then generate output that is tailored for Fortran. # The default value is: NO. -OPTIMIZE_FOR_FORTRAN = NO +OPTIMIZE_FOR_FORTRAN = NO # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL # sources. Doxygen will then generate output that is tailored for VHDL. # The default value is: NO. -OPTIMIZE_OUTPUT_VHDL = NO +OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given @@ -291,7 +281,7 @@ # Note that for custom extensions you also need to set FILE_PATTERNS otherwise # the files are not read by doxygen. -EXTENSION_MAPPING = +EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable @@ -301,7 +291,7 @@ # case of backward compatibilities issues. # The default value is: YES. -MARKDOWN_SUPPORT = YES +MARKDOWN_SUPPORT = YES # When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up # to that level are automatically included in the table of contents, even if @@ -310,7 +300,7 @@ # Minimum value: 0, maximum value: 99, default value: 0. # This tag requires that the tag MARKDOWN_SUPPORT is set to YES. -TOC_INCLUDE_HEADINGS = 0 +TOC_INCLUDE_HEADINGS = 0 # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can @@ -318,7 +308,7 @@ # globally by setting AUTOLINK_SUPPORT to NO. # The default value is: YES. -AUTOLINK_SUPPORT = YES +AUTOLINK_SUPPORT = YES # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should set this @@ -328,13 +318,13 @@ # diagrams that involve STL classes more complete and accurate. # The default value is: NO. -BUILTIN_STL_SUPPORT = NO +BUILTIN_STL_SUPPORT = NO # If you use Microsoft's C++/CLI language, you should set this option to YES to # enable parsing support. # The default value is: NO. -CPP_CLI_SUPPORT = NO +CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen @@ -342,7 +332,7 @@ # of private inheritance when no explicit protection keyword is present. # The default value is: NO. -SIP_SUPPORT = NO +SIP_SUPPORT = NO # For Microsoft's IDL there are propget and propput attributes to indicate # getter and setter methods for a property. Setting this option to YES will make @@ -352,7 +342,7 @@ # should set this option to NO. # The default value is: YES. -IDL_PROPERTY_SUPPORT = YES +IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC # tag is set to YES then doxygen will reuse the documentation of the first @@ -360,7 +350,7 @@ # all members of a group must be documented explicitly. # The default value is: NO. -DISTRIBUTE_GROUP_DOC = NO +DISTRIBUTE_GROUP_DOC = NO # If one adds a struct or class to a group and this option is enabled, then also # any nested class or struct is added to the same group. By default this option @@ -376,7 +366,7 @@ # \nosubgrouping command. # The default value is: YES. -SUBGROUPING = YES +SUBGROUPING = YES # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions # are shown inside the group in which they are included (e.g. using \ingroup) @@ -397,7 +387,7 @@ # Man pages) or section (for LaTeX and RTF). # The default value is: NO. -INLINE_SIMPLE_STRUCTS = NO +INLINE_SIMPLE_STRUCTS = NO # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or # enum is documented as struct, union, or enum with the name of the typedef. So @@ -408,7 +398,7 @@ # types are typedef'ed and only the typedef is referenced, never the tag name. # The default value is: NO. -TYPEDEF_HIDES_STRUCT = NO +TYPEDEF_HIDES_STRUCT = NO # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This # cache is used to resolve symbols given their name and scope. Since this can be @@ -421,7 +411,7 @@ # the optimal cache size from a speed point of view. # Minimum value: 0, maximum value: 9, default value: 0. -LOOKUP_CACHE_SIZE = 0 +LOOKUP_CACHE_SIZE = 0 #--------------------------------------------------------------------------- # Build related configuration options @@ -435,25 +425,25 @@ # normally produced when WARNINGS is set to YES. # The default value is: NO. -EXTRACT_ALL = YES +EXTRACT_ALL = YES # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will # be included in the documentation. # The default value is: NO. -EXTRACT_PRIVATE = YES +EXTRACT_PRIVATE = YES # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. -EXTRACT_PACKAGE = NO +EXTRACT_PACKAGE = NO # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be # included in the documentation. # The default value is: NO. -EXTRACT_STATIC = YES +EXTRACT_STATIC = YES # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined # locally in source files will be included in the documentation. If set to NO, @@ -461,7 +451,7 @@ # for Java sources. # The default value is: YES. -EXTRACT_LOCAL_CLASSES = YES +EXTRACT_LOCAL_CLASSES = YES # This flag is only useful for Objective-C code. If set to YES, local methods, # which are defined in the implementation section but not in the interface are @@ -469,7 +459,7 @@ # included. # The default value is: NO. -EXTRACT_LOCAL_METHODS = NO +EXTRACT_LOCAL_METHODS = NO # If this flag is set to YES, the members of anonymous namespaces will be # extracted and appear in the documentation as a namespace called @@ -478,7 +468,7 @@ # are hidden. # The default value is: NO. -EXTRACT_ANON_NSPACES = NO +EXTRACT_ANON_NSPACES = NO # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all # undocumented members inside documented classes or files. If set to NO these @@ -486,7 +476,7 @@ # section is generated. This option has no effect if EXTRACT_ALL is enabled. # The default value is: NO. -HIDE_UNDOC_MEMBERS = NO +HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set @@ -494,28 +484,28 @@ # has no effect if EXTRACT_ALL is enabled. # The default value is: NO. -HIDE_UNDOC_CLASSES = NO +HIDE_UNDOC_CLASSES = NO # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend # (class|struct|union) declarations. If set to NO, these declarations will be # included in the documentation. # The default value is: NO. -HIDE_FRIEND_COMPOUNDS = NO +HIDE_FRIEND_COMPOUNDS = NO # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any # documentation blocks found inside the body of a function. If set to NO, these # blocks will be appended to the function's detailed documentation block. # The default value is: NO. -HIDE_IN_BODY_DOCS = NO +HIDE_IN_BODY_DOCS = NO # The INTERNAL_DOCS tag determines if documentation that is typed after a # \internal command is included. If the tag is set to NO then the documentation # will be excluded. Set it to YES to include the internal documentation. # The default value is: NO. -INTERNAL_DOCS = NO +INTERNAL_DOCS = NO # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file # names in lower-case letters. If set to YES, upper-case letters are also @@ -524,53 +514,53 @@ # and Mac users are advised to set this option to NO. # The default value is: system dependent. -CASE_SENSE_NAMES = NO +CASE_SENSE_NAMES = NO # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with # their full class and namespace scopes in the documentation. If set to YES, the # scope will be hidden. # The default value is: NO. -HIDE_SCOPE_NAMES = NO +HIDE_SCOPE_NAMES = NO # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will # append additional text to a page's title, such as Class Reference. If set to # YES the compound reference will be hidden. # The default value is: NO. -HIDE_COMPOUND_REFERENCE= NO +HIDE_COMPOUND_REFERENCE = NO # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. -SHOW_INCLUDE_FILES = YES +SHOW_INCLUDE_FILES = YES # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each # grouped member an include statement to the documentation, telling the reader # which file to include in order to use the member. # The default value is: NO. -SHOW_GROUPED_MEMB_INC = NO +SHOW_GROUPED_MEMB_INC = NO # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. -FORCE_LOCAL_INCLUDES = NO +FORCE_LOCAL_INCLUDES = NO # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the # documentation for inline members. # The default value is: YES. -INLINE_INFO = YES +INLINE_INFO = YES # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the # (detailed) documentation of file and class members alphabetically by member # name. If set to NO, the members will appear in declaration order. # The default value is: YES. -SORT_MEMBER_DOCS = YES +SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member @@ -578,7 +568,7 @@ # this will also influence the order of the classes in the class list. # The default value is: NO. -SORT_BRIEF_DOCS = NO +SORT_BRIEF_DOCS = NO # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the # (brief and detailed) documentation of class members so that constructors and @@ -597,7 +587,7 @@ # appear in their defined order. # The default value is: NO. -SORT_GROUP_NAMES = NO +SORT_GROUP_NAMES = NO # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by # fully-qualified names, including namespaces. If set to NO, the class list will @@ -607,7 +597,7 @@ # list. # The default value is: NO. -SORT_BY_SCOPE_NAME = NO +SORT_BY_SCOPE_NAME = NO # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper # type resolution of all parameters of a function it will reject a match between @@ -617,38 +607,38 @@ # accept a match between prototype and implementation in such cases. # The default value is: NO. -STRICT_PROTO_MATCHING = NO +STRICT_PROTO_MATCHING = NO # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo # list. This list is created by putting \todo commands in the documentation. # The default value is: YES. -GENERATE_TODOLIST = YES +GENERATE_TODOLIST = YES # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test # list. This list is created by putting \test commands in the documentation. # The default value is: YES. -GENERATE_TESTLIST = YES +GENERATE_TESTLIST = YES # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug # list. This list is created by putting \bug commands in the documentation. # The default value is: YES. -GENERATE_BUGLIST = YES +GENERATE_BUGLIST = YES # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) # the deprecated list. This list is created by putting \deprecated commands in # the documentation. # The default value is: YES. -GENERATE_DEPRECATEDLIST= YES +GENERATE_DEPRECATEDLIST = YES # The ENABLED_SECTIONS tag can be used to enable conditional documentation # sections, marked by \if <section_label> ... \endif and \cond <section_label> # ... \endcond blocks. -ENABLED_SECTIONS = +ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the # initial value of a variable or macro / define can have for it to appear in the @@ -659,28 +649,28 @@ # documentation regardless of this setting. # Minimum value: 0, maximum value: 10000, default value: 30. -MAX_INITIALIZER_LINES = 30 +MAX_INITIALIZER_LINES = 30 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at # the bottom of the documentation of classes and structs. If set to YES, the # list will mention the files that were used to generate the documentation. # The default value is: YES. -SHOW_USED_FILES = YES +SHOW_USED_FILES = YES # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This # will remove the Files entry from the Quick Index and from the Folder Tree View # (if specified). # The default value is: YES. -SHOW_FILES = YES +SHOW_FILES = YES # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces # page. This will remove the Namespaces entry from the Quick Index and from the # Folder Tree View (if specified). # The default value is: YES. -SHOW_NAMESPACES = YES +SHOW_NAMESPACES = YES # The FILE_VERSION_FILTER tag can be used to specify a program or script that # doxygen should invoke to get the current version for each file (typically from @@ -690,7 +680,7 @@ # by doxygen. Whatever the program writes to standard output is used as the file # version. For an example see the documentation. -FILE_VERSION_FILTER = +FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated @@ -703,7 +693,7 @@ # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE # tag is left empty. -LAYOUT_FILE = +LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib @@ -713,7 +703,7 @@ # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. -CITE_BIB_FILES = +CITE_BIB_FILES = #--------------------------------------------------------------------------- # Configuration options related to warning and progress messages @@ -724,7 +714,7 @@ # messages are off. # The default value is: NO. -QUIET = NO +QUIET = NO # The WARNINGS tag can be used to turn on/off the warning messages that are # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES @@ -733,14 +723,14 @@ # Tip: Turn warnings on while writing the documentation. # The default value is: YES. -WARNINGS = YES +WARNINGS = YES # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: YES. -WARN_IF_UNDOCUMENTED = YES +WARN_IF_UNDOCUMENTED = YES # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for # potential errors in the documentation, such as not documenting some parameters @@ -748,7 +738,7 @@ # markup commands wrongly. # The default value is: YES. -WARN_IF_DOC_ERROR = YES +WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return @@ -756,13 +746,13 @@ # parameter documentation, but not about the absence of documentation. # The default value is: NO. -WARN_NO_PARAMDOC = NO +WARN_NO_PARAMDOC = NO # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when # a warning is encountered. # The default value is: NO. -WARN_AS_ERROR = NO +WARN_AS_ERROR = NO # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which @@ -772,13 +762,13 @@ # FILE_VERSION_FILTER) # The default value is: $file:$line: $text. -WARN_FORMAT = "$file:$line: $text" +WARN_FORMAT = "$file:$line: $text" # The WARN_LOGFILE tag can be used to specify a file to which warning and error # messages should be written. If left blank the output is written to standard # error (stderr). -WARN_LOGFILE = +WARN_LOGFILE = #--------------------------------------------------------------------------- # Configuration options related to the input files @@ -790,7 +780,7 @@ # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. -INPUT = xDotBridge +INPUT = xDotBridge # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses @@ -799,7 +789,7 @@ # possible encodings. # The default value is: UTF-8. -INPUT_ENCODING = UTF-8 +INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and @@ -815,56 +805,13 @@ # *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, # *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf. -FILE_PATTERNS = *.c \ - *.cc \ - *.cxx \ - *.cpp \ - *.c++ \ - *.java \ - *.ii \ - *.ixx \ - *.ipp \ - *.i++ \ - *.inl \ - *.idl \ - *.ddl \ - *.odl \ - *.h \ - *.hh \ - *.hxx \ - *.hpp \ - *.h++ \ - *.cs \ - *.d \ - *.php \ - *.php4 \ - *.php5 \ - *.phtml \ - *.inc \ - *.m \ - *.markdown \ - *.md \ - *.mm \ - *.dox \ - *.py \ - *.pyw \ - *.f90 \ - *.f95 \ - *.f03 \ - *.f08 \ - *.f \ - *.for \ - *.tcl \ - *.vhd \ - *.vhdl \ - *.ucf \ - *.qsf +FILE_PATTERNS = *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.idl *.ddl *.odl *.h *.hh *.hxx *.hpp *.h++ *.cs *.d *.php *.php4 *.php5 *.phtml *.inc *.m *.markdown *.md *.mm *.dox *.py *.pyw *.f90 *.f95 *.f03 *.f08 *.f *.for *.tcl *.vhd *.vhdl *.ucf *.qsf # The RECURSIVE tag can be used to specify whether or not subdirectories should # be searched for input files as well. # The default value is: NO. -RECURSIVE = YES +RECURSIVE = YES # The EXCLUDE tag can be used to specify files and/or directories that should be # excluded from the INPUT source files. This way you can easily exclude a @@ -873,14 +820,14 @@ # Note that relative paths are relative to the directory from which doxygen is # run. -EXCLUDE = +EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded # from the input. # The default value is: NO. -EXCLUDE_SYMLINKS = NO +EXCLUDE_SYMLINKS = NO # If the value of the INPUT tag contains directories, you can use the # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude @@ -889,7 +836,7 @@ # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names # (namespaces, classes, functions, etc.) that should be excluded from the @@ -900,33 +847,33 @@ # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* -EXCLUDE_SYMBOLS = +EXCLUDE_SYMBOLS = # The EXAMPLE_PATH tag can be used to specify one or more files or directories # that contain example code fragments that are included (see the \include # command). -EXAMPLE_PATH = +EXAMPLE_PATH = # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and # *.h) to filter out the source-files in the directories. If left blank all # files are included. -EXAMPLE_PATTERNS = * +EXAMPLE_PATTERNS = * # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # searched for input files to be used with the \include or \dontinclude commands # irrespective of the value of the RECURSIVE tag. # The default value is: NO. -EXAMPLE_RECURSIVE = NO +EXAMPLE_RECURSIVE = NO # The IMAGE_PATH tag can be used to specify one or more files or directories # that contain images that are to be included in the documentation (see the # \image command). -IMAGE_PATH = +IMAGE_PATH = # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program @@ -947,7 +894,7 @@ # need to set EXTENSION_MAPPING for the extension otherwise the files are not # properly processed by doxygen. -INPUT_FILTER = +INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern # basis. Doxygen will compare the file name with each pattern and apply the @@ -960,14 +907,14 @@ # need to set EXTENSION_MAPPING for the extension otherwise the files are not # properly processed by doxygen. -FILTER_PATTERNS = +FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using # INPUT_FILTER) will also be used to filter the input files that are used for # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). # The default value is: NO. -FILTER_SOURCE_FILES = NO +FILTER_SOURCE_FILES = NO # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and @@ -995,20 +942,20 @@ # also VERBATIM_HEADERS is set to NO. # The default value is: NO. -SOURCE_BROWSER = YES +SOURCE_BROWSER = YES # Setting the INLINE_SOURCES tag to YES will include the body of functions, # classes and enums directly into the documentation. # The default value is: NO. -INLINE_SOURCES = NO +INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any # special comment blocks from generated source code fragments. Normal C, C++ and # Fortran comments will always remain visible. # The default value is: YES. -STRIP_CODE_COMMENTS = YES +STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented # function all documented functions referencing it will be listed. @@ -1020,7 +967,7 @@ # all documented entities called/used by that function will be listed. # The default value is: NO. -REFERENCES_RELATION = YES +REFERENCES_RELATION = YES # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set # to YES then the hyperlinks from functions in REFERENCES_RELATION and @@ -1038,7 +985,7 @@ # The default value is: YES. # This tag requires that the tag SOURCE_BROWSER is set to YES. -SOURCE_TOOLTIPS = YES +SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in @@ -1060,7 +1007,7 @@ # The default value is: NO. # This tag requires that the tag SOURCE_BROWSER is set to YES. -USE_HTAGS = NO +USE_HTAGS = NO # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a # verbatim copy of the header file for each class for which an include is @@ -1068,7 +1015,7 @@ # See also: Section \class. # The default value is: YES. -VERBATIM_HEADERS = YES +VERBATIM_HEADERS = YES # If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the # clang parser (see: http://clang.llvm.org/) for more accurate parsing at the @@ -1087,7 +1034,7 @@ # specified with INPUT and INCLUDE_PATH. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. -CLANG_OPTIONS = +CLANG_OPTIONS = #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index @@ -1098,14 +1045,14 @@ # classes, structs, unions or interfaces. # The default value is: YES. -ALPHABETICAL_INDEX = YES +ALPHABETICAL_INDEX = YES # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in # which the alphabetical index list will be split. # Minimum value: 1, maximum value: 20, default value: 5. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. -COLS_IN_ALPHA_INDEX = 5 +COLS_IN_ALPHA_INDEX = 5 # In case all classes in a project start with a common prefix, all classes will # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag @@ -1113,7 +1060,7 @@ # while generating the index headers. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. -IGNORE_PREFIX = +IGNORE_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the HTML output @@ -1122,7 +1069,7 @@ # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output # The default value is: YES. -GENERATE_HTML = YES +GENERATE_HTML = YES # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of @@ -1130,14 +1077,14 @@ # The default directory is: html. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_OUTPUT = html +HTML_OUTPUT = html # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each # generated HTML page (for example: .htm, .php, .asp). # The default value is: .html. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_FILE_EXTENSION = .html +HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a user-defined HTML header file for # each generated HTML page. If the tag is left blank doxygen will generate a @@ -1157,7 +1104,7 @@ # of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_HEADER = +HTML_HEADER = # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each # generated HTML page. If the tag is left blank doxygen will generate a standard @@ -1167,7 +1114,7 @@ # that doxygen normally uses. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_FOOTER = +HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style # sheet that is used by each HTML page. It can be used to fine-tune the look of @@ -1179,7 +1126,7 @@ # obsolete. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_STYLESHEET = +HTML_STYLESHEET = # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined # cascading style sheets that are included after the standard style sheets @@ -1192,7 +1139,7 @@ # list). For an example see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_EXTRA_STYLESHEET = +HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note @@ -1202,7 +1149,7 @@ # files will be copied as-is; there are no commands or markers available. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_EXTRA_FILES = +HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to @@ -1213,7 +1160,7 @@ # Minimum value: 0, maximum value: 359, default value: 220. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_COLORSTYLE_HUE = 220 +HTML_COLORSTYLE_HUE = 220 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors # in the HTML output. For a value of 0 the output will use grayscales only. A @@ -1221,7 +1168,7 @@ # Minimum value: 0, maximum value: 255, default value: 100. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_COLORSTYLE_SAT = 100 +HTML_COLORSTYLE_SAT = 100 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the # luminance component of the colors in the HTML output. Values below 100 @@ -1232,7 +1179,7 @@ # Minimum value: 40, maximum value: 240, default value: 80. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_COLORSTYLE_GAMMA = 80 +HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this @@ -1241,7 +1188,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_TIMESTAMP = NO +HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the @@ -1249,7 +1196,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_DYNAMIC_SECTIONS = NO +HTML_DYNAMIC_SECTIONS = NO # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries # shown in the various tree structured indices initially; the user can expand @@ -1276,7 +1223,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -GENERATE_DOCSET = NO +GENERATE_DOCSET = NO # This tag determines the name of the docset feed. A documentation feed provides # an umbrella under which multiple documentation sets from a single provider @@ -1284,7 +1231,7 @@ # The default value is: Doxygen generated docs. # This tag requires that the tag GENERATE_DOCSET is set to YES. -DOCSET_FEEDNAME = "Doxygen generated docs" +DOCSET_FEEDNAME = "Doxygen generated docs" # This tag specifies a string that should uniquely identify the documentation # set bundle. This should be a reverse domain-name style string, e.g. @@ -1292,7 +1239,7 @@ # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_DOCSET is set to YES. -DOCSET_BUNDLE_ID = org.doxygen.Project +DOCSET_BUNDLE_ID = org.doxygen.Project # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify # the documentation publisher. This should be a reverse domain-name style @@ -1300,13 +1247,13 @@ # The default value is: org.doxygen.Publisher. # This tag requires that the tag GENERATE_DOCSET is set to YES. -DOCSET_PUBLISHER_ID = org.doxygen.Publisher +DOCSET_PUBLISHER_ID = org.doxygen.Publisher # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. # The default value is: Publisher. # This tag requires that the tag GENERATE_DOCSET is set to YES. -DOCSET_PUBLISHER_NAME = Publisher +DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The @@ -1324,14 +1271,14 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -GENERATE_HTMLHELP = NO +GENERATE_HTMLHELP = NO # The CHM_FILE tag can be used to specify the file name of the resulting .chm # file. You can add a path in front of the file if the result should not be # written to the html output directory. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -CHM_FILE = +CHM_FILE = # The HHC_LOCATION tag can be used to specify the location (absolute path # including file name) of the HTML help compiler (hhc.exe). If non-empty, @@ -1339,20 +1286,20 @@ # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -HHC_LOCATION = +HHC_LOCATION = # The GENERATE_CHI flag controls if a separate .chi index file is generated # (YES) or that it should be included in the master .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -GENERATE_CHI = NO +GENERATE_CHI = NO # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) # and project file content. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -CHM_INDEX_ENCODING = +CHM_INDEX_ENCODING = # The BINARY_TOC flag controls whether a binary table of contents is generated # (YES) or a normal table of contents (NO) in the .chm file. Furthermore it @@ -1360,14 +1307,14 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -BINARY_TOC = NO +BINARY_TOC = NO # The TOC_EXPAND flag can be set to YES to add extra items for group members to # the table of contents of the HTML help documentation and to the tree view. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -TOC_EXPAND = NO +TOC_EXPAND = NO # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that @@ -1376,14 +1323,14 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -GENERATE_QHP = NO +GENERATE_QHP = NO # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify # the file name of the resulting .qch file. The path specified is relative to # the HTML output folder. # This tag requires that the tag GENERATE_QHP is set to YES. -QCH_FILE = +QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace @@ -1391,7 +1338,7 @@ # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_NAMESPACE = org.doxygen.Project +QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual @@ -1400,7 +1347,7 @@ # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_VIRTUAL_FOLDER = doc +QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom @@ -1408,7 +1355,7 @@ # filters). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_CUST_FILTER_NAME = +QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom @@ -1416,21 +1363,21 @@ # filters). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_CUST_FILTER_ATTRS = +QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_SECT_FILTER_ATTRS = +QHP_SECT_FILTER_ATTRS = # The QHG_LOCATION tag can be used to specify the location of Qt's # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the # generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. -QHG_LOCATION = +QHG_LOCATION = # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be # generated, together with the HTML files, they form an Eclipse help plugin. To @@ -1442,7 +1389,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -GENERATE_ECLIPSEHELP = NO +GENERATE_ECLIPSEHELP = NO # A unique identifier for the Eclipse help plugin. When installing the plugin # the directory name containing the HTML and XML files should also have this @@ -1450,7 +1397,7 @@ # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. -ECLIPSE_DOC_ID = org.doxygen.Project +ECLIPSE_DOC_ID = org.doxygen.Project # If you want full control over the layout of the generated HTML pages it might # be necessary to disable the index and replace it with your own. The @@ -1461,7 +1408,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -DISABLE_INDEX = NO +DISABLE_INDEX = NO # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. If the tag @@ -1478,7 +1425,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -GENERATE_TREEVIEW = NO +GENERATE_TREEVIEW = YES # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. @@ -1488,21 +1435,21 @@ # Minimum value: 0, maximum value: 20, default value: 4. # This tag requires that the tag GENERATE_HTML is set to YES. -ENUM_VALUES_PER_LINE = 4 +ENUM_VALUES_PER_LINE = 4 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used # to set the initial width (in pixels) of the frame in which the tree is shown. # Minimum value: 0, maximum value: 1500, default value: 250. # This tag requires that the tag GENERATE_HTML is set to YES. -TREEVIEW_WIDTH = 250 +TREEVIEW_WIDTH = 250 # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to # external symbols imported via tag files in a separate window. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -EXT_LINKS_IN_WINDOW = NO +EXT_LINKS_IN_WINDOW = NO # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful @@ -1511,7 +1458,7 @@ # Minimum value: 8, maximum value: 50, default value: 10. # This tag requires that the tag GENERATE_HTML is set to YES. -FORMULA_FONTSIZE = 10 +FORMULA_FONTSIZE = 10 # Use the FORMULA_TRANPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not @@ -1522,7 +1469,7 @@ # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. -FORMULA_TRANSPARENT = YES +FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see # http://www.mathjax.org) which uses client side Javascript for the rendering @@ -1533,7 +1480,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -USE_MATHJAX = NO +USE_MATHJAX = NO # When MathJax is enabled you can set the default output format to be used for # the MathJax output. See the MathJax site (see: @@ -1543,7 +1490,7 @@ # The default value is: HTML-CSS. # This tag requires that the tag USE_MATHJAX is set to YES. -MATHJAX_FORMAT = HTML-CSS +MATHJAX_FORMAT = HTML-CSS # When MathJax is enabled you need to specify the location relative to the HTML # output directory using the MATHJAX_RELPATH option. The destination directory @@ -1556,14 +1503,14 @@ # The default value is: http://cdn.mathjax.org/mathjax/latest. # This tag requires that the tag USE_MATHJAX is set to YES. -MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax # extension names that should be enabled during MathJax rendering. For example # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols # This tag requires that the tag USE_MATHJAX is set to YES. -MATHJAX_EXTENSIONS = +MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site @@ -1571,7 +1518,7 @@ # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. -MATHJAX_CODEFILE = +MATHJAX_CODEFILE = # When the SEARCHENGINE tag is enabled doxygen will generate a search box for # the HTML output. The underlying search engine uses javascript and DHTML and @@ -1592,7 +1539,7 @@ # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. -SEARCHENGINE = YES +SEARCHENGINE = YES # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There @@ -1604,7 +1551,7 @@ # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. -SERVER_BASED_SEARCH = NO +SERVER_BASED_SEARCH = NO # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP # script for searching. Instead the search results are written to an XML file @@ -1620,7 +1567,7 @@ # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. -EXTERNAL_SEARCH = NO +EXTERNAL_SEARCH = NO # The SEARCHENGINE_URL should point to a search engine hosted by a web server # which will return the search results when EXTERNAL_SEARCH is enabled. @@ -1631,7 +1578,7 @@ # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. -SEARCHENGINE_URL = +SEARCHENGINE_URL = # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed # search data is written to a file for indexing by an external tool. With the @@ -1639,7 +1586,7 @@ # The default file is: searchdata.xml. # This tag requires that the tag SEARCHENGINE is set to YES. -SEARCHDATA_FILE = searchdata.xml +SEARCHDATA_FILE = searchdata.xml # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is @@ -1647,7 +1594,7 @@ # projects and redirect the results back to the right project. # This tag requires that the tag SEARCHENGINE is set to YES. -EXTERNAL_SEARCH_ID = +EXTERNAL_SEARCH_ID = # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen # projects other than the one defined by this configuration file, but that are @@ -1657,7 +1604,7 @@ # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... # This tag requires that the tag SEARCHENGINE is set to YES. -EXTRA_SEARCH_MAPPINGS = +EXTRA_SEARCH_MAPPINGS = #--------------------------------------------------------------------------- # Configuration options related to the LaTeX output @@ -1666,7 +1613,7 @@ # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. # The default value is: YES. -GENERATE_LATEX = YES +GENERATE_LATEX = YES # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of @@ -1674,7 +1621,7 @@ # The default directory is: latex. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_OUTPUT = latex +LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. @@ -1685,14 +1632,14 @@ # The default file is: latex. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_CMD_NAME = latex +LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. -MAKEINDEX_CMD_NAME = makeindex +MAKEINDEX_CMD_NAME = makeindex # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some @@ -1700,7 +1647,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. -COMPACT_LATEX = NO +COMPACT_LATEX = NO # The PAPER_TYPE tag can be used to set the paper type that is used by the # printer. @@ -1709,7 +1656,7 @@ # The default value is: a4. # This tag requires that the tag GENERATE_LATEX is set to YES. -PAPER_TYPE = a4 +PAPER_TYPE = a4 # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names # that should be included in the LaTeX output. The package can be specified just @@ -1721,7 +1668,7 @@ # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. -EXTRA_PACKAGES = +EXTRA_PACKAGES = # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the # generated LaTeX document. The header should contain everything until the first @@ -1737,7 +1684,7 @@ # to HTML_HEADER. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_HEADER = +LATEX_HEADER = # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the # generated LaTeX document. The footer should contain everything after the last @@ -1748,7 +1695,7 @@ # Note: Only use a user-defined footer if you know what you are doing! # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_FOOTER = +LATEX_FOOTER = # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined # LaTeX style sheets that are included after the standard style sheets created @@ -1767,7 +1714,7 @@ # markers available. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_EXTRA_FILES = +LATEX_EXTRA_FILES = # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will @@ -1776,7 +1723,7 @@ # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. -PDF_HYPERLINKS = YES +PDF_HYPERLINKS = YES # If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate # the PDF file directly from the LaTeX files. Set this option to YES, to get a @@ -1784,7 +1731,7 @@ # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. -USE_PDFLATEX = YES +USE_PDFLATEX = YES # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode # command to the generated LaTeX files. This will instruct LaTeX to keep running @@ -1793,14 +1740,14 @@ # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_BATCHMODE = NO +LATEX_BATCHMODE = NO # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the # index chapters (such as File Index, Compound Index, etc.) in the output. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_HIDE_INDICES = NO +LATEX_HIDE_INDICES = NO # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source # code with syntax highlighting in the LaTeX output. @@ -1810,7 +1757,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_SOURCE_CODE = NO +LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See @@ -1818,7 +1765,7 @@ # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_BIB_STYLE = plain +LATEX_BIB_STYLE = plain # If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated # page will contain the date and time when the page was generated. Setting this @@ -1826,7 +1773,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_TIMESTAMP = NO +LATEX_TIMESTAMP = NO #--------------------------------------------------------------------------- # Configuration options related to the RTF output @@ -1837,7 +1784,7 @@ # readers/editors. # The default value is: NO. -GENERATE_RTF = NO +GENERATE_RTF = NO # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of @@ -1845,7 +1792,7 @@ # The default directory is: rtf. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_OUTPUT = rtf +RTF_OUTPUT = rtf # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF # documents. This may be useful for small projects and may help to save some @@ -1853,7 +1800,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_RTF is set to YES. -COMPACT_RTF = NO +COMPACT_RTF = NO # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will # contain hyperlink fields. The RTF file will contain links (just like the HTML @@ -1865,7 +1812,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_HYPERLINKS = NO +RTF_HYPERLINKS = NO # Load stylesheet definitions from file. Syntax is similar to doxygen's config # file, i.e. a series of assignments. You only have to provide replacements, @@ -1875,14 +1822,14 @@ # default style sheet that doxygen normally uses. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_STYLESHEET_FILE = +RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is # similar to doxygen's config file. A template extensions file can be generated # using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_EXTENSIONS_FILE = +RTF_EXTENSIONS_FILE = # If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code # with syntax highlighting in the RTF output. @@ -1892,7 +1839,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_SOURCE_CODE = NO +RTF_SOURCE_CODE = NO #--------------------------------------------------------------------------- # Configuration options related to the man page output @@ -1902,7 +1849,7 @@ # classes and files. # The default value is: NO. -GENERATE_MAN = NO +GENERATE_MAN = NO # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of @@ -1911,7 +1858,7 @@ # The default directory is: man. # This tag requires that the tag GENERATE_MAN is set to YES. -MAN_OUTPUT = man +MAN_OUTPUT = man # The MAN_EXTENSION tag determines the extension that is added to the generated # man pages. In case the manual section does not start with a number, the number @@ -1920,14 +1867,14 @@ # The default value is: .3. # This tag requires that the tag GENERATE_MAN is set to YES. -MAN_EXTENSION = .3 +MAN_EXTENSION = .3 # The MAN_SUBDIR tag determines the name of the directory created within # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by # MAN_EXTENSION with the initial . removed. # This tag requires that the tag GENERATE_MAN is set to YES. -MAN_SUBDIR = +MAN_SUBDIR = # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real @@ -1936,7 +1883,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_MAN is set to YES. -MAN_LINKS = NO +MAN_LINKS = NO #--------------------------------------------------------------------------- # Configuration options related to the XML output @@ -1946,7 +1893,7 @@ # captures the structure of the code including all documentation. # The default value is: NO. -GENERATE_XML = NO +GENERATE_XML = NO # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of @@ -1954,7 +1901,7 @@ # The default directory is: xml. # This tag requires that the tag GENERATE_XML is set to YES. -XML_OUTPUT = xml +XML_OUTPUT = xml # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to @@ -1963,7 +1910,7 @@ # The default value is: YES. # This tag requires that the tag GENERATE_XML is set to YES. -XML_PROGRAMLISTING = YES +XML_PROGRAMLISTING = YES #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output @@ -1973,7 +1920,7 @@ # that can be used to generate PDF. # The default value is: NO. -GENERATE_DOCBOOK = NO +GENERATE_DOCBOOK = NO # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in @@ -1981,7 +1928,7 @@ # The default directory is: docbook. # This tag requires that the tag GENERATE_DOCBOOK is set to YES. -DOCBOOK_OUTPUT = docbook +DOCBOOK_OUTPUT = docbook # If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the # program listings (including syntax highlighting and cross-referencing @@ -2002,7 +1949,7 @@ # still experimental and incomplete at the moment. # The default value is: NO. -GENERATE_AUTOGEN_DEF = NO +GENERATE_AUTOGEN_DEF = NO #--------------------------------------------------------------------------- # Configuration options related to the Perl module output @@ -2014,7 +1961,7 @@ # Note that this feature is still experimental and incomplete at the moment. # The default value is: NO. -GENERATE_PERLMOD = NO +GENERATE_PERLMOD = NO # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI @@ -2022,7 +1969,7 @@ # The default value is: NO. # This tag requires that the tag GENERATE_PERLMOD is set to YES. -PERLMOD_LATEX = NO +PERLMOD_LATEX = NO # If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely # formatted so it can be parsed by a human reader. This is useful if you want to @@ -2032,7 +1979,7 @@ # The default value is: YES. # This tag requires that the tag GENERATE_PERLMOD is set to YES. -PERLMOD_PRETTY = YES +PERLMOD_PRETTY = YES # The names of the make variables in the generated doxyrules.make file are # prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful @@ -2050,7 +1997,7 @@ # C-preprocessor directives found in the sources and include files. # The default value is: YES. -ENABLE_PREPROCESSING = YES +ENABLE_PREPROCESSING = YES # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names # in the source code. If set to NO, only conditional compilation will be @@ -2059,7 +2006,7 @@ # The default value is: NO. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -MACRO_EXPANSION = NO +MACRO_EXPANSION = NO # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then # the macro expansion is limited to the macros specified with the PREDEFINED and @@ -2067,21 +2014,21 @@ # The default value is: NO. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -EXPAND_ONLY_PREDEF = NO +EXPAND_ONLY_PREDEF = NO # If the SEARCH_INCLUDES tag is set to YES, the include files in the # INCLUDE_PATH will be searched if a #include is found. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -SEARCH_INCLUDES = YES +SEARCH_INCLUDES = YES # The INCLUDE_PATH tag can be used to specify one or more directories that # contain include files that are not input files but should be processed by the # preprocessor. # This tag requires that the tag SEARCH_INCLUDES is set to YES. -INCLUDE_PATH = +INCLUDE_PATH = # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # patterns (like *.h and *.hpp) to filter out the header-files in the @@ -2089,7 +2036,7 @@ # used. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -INCLUDE_FILE_PATTERNS = +INCLUDE_FILE_PATTERNS = # The PREDEFINED tag can be used to specify one or more macro names that are # defined before the preprocessor is started (similar to the -D option of e.g. @@ -2099,7 +2046,7 @@ # recursively expanded use the := operator instead of the = operator. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -PREDEFINED = +PREDEFINED = # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this # tag can be used to specify a list of macro names that should be expanded. The @@ -2108,7 +2055,7 @@ # definition found in the source code. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will # remove all references to function-like macros that are alone on a line, have @@ -2118,7 +2065,7 @@ # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -SKIP_FUNCTION_MACROS = YES +SKIP_FUNCTION_MACROS = YES #--------------------------------------------------------------------------- # Configuration options related to external references @@ -2137,40 +2084,40 @@ # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. -TAGFILES = +TAGFILES = # When a file name is specified after GENERATE_TAGFILE, doxygen will create a # tag file that is based on the input files it reads. See section "Linking to # external documentation" for more information about the usage of tag files. -GENERATE_TAGFILE = +GENERATE_TAGFILE = # If the ALLEXTERNALS tag is set to YES, all external class will be listed in # the class index. If set to NO, only the inherited external classes will be # listed. # The default value is: NO. -ALLEXTERNALS = NO +ALLEXTERNALS = NO # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed # in the modules index. If set to NO, only the current project's groups will be # listed. # The default value is: YES. -EXTERNAL_GROUPS = YES +EXTERNAL_GROUPS = YES # If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in # the related pages index. If set to NO, only the current project's pages will # be listed. # The default value is: YES. -EXTERNAL_PAGES = YES +EXTERNAL_PAGES = YES # The PERL_PATH should be the absolute path and name of the perl script # interpreter (i.e. the result of 'which perl'). # The default file (with absolute path) is: /usr/bin/perl. -PERL_PATH = /usr/bin/perl +PERL_PATH = /usr/bin/perl #--------------------------------------------------------------------------- # Configuration options related to the dot tool @@ -2183,7 +2130,7 @@ # powerful graphs. # The default value is: YES. -CLASS_DIAGRAMS = YES +CLASS_DIAGRAMS = YES # You can define message sequence charts within doxygen comments using the \msc # command. Doxygen will then run the mscgen tool (see: @@ -2192,20 +2139,20 @@ # the mscgen tool resides. If left empty the tool is assumed to be found in the # default search path. -MSCGEN_PATH = +MSCGEN_PATH = # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. # If left empty dia is assumed to be found in the default search path. -DIA_PATH = +DIA_PATH = # If set to YES the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. -HIDE_UNDOC_RELATIONS = YES +HIDE_UNDOC_RELATIONS = YES # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz (see: @@ -2214,7 +2161,7 @@ # set to NO # The default value is: NO. -HAVE_DOT = NO +HAVE_DOT = NO # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed # to run in parallel. When set to 0 doxygen will base this on the number of @@ -2224,7 +2171,7 @@ # Minimum value: 0, maximum value: 32, default value: 0. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_NUM_THREADS = 0 +DOT_NUM_THREADS = 0 # When you want a differently looking font in the dot files that doxygen # generates you can specify the font name using DOT_FONTNAME. You need to make @@ -2234,21 +2181,21 @@ # The default value is: Helvetica. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTNAME = Helvetica +DOT_FONTNAME = Helvetica # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of # dot graphs. # Minimum value: 4, maximum value: 24, default value: 10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTSIZE = 10 +DOT_FONTSIZE = 10 # By default doxygen will tell dot to use the default font as specified with # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set # the path where dot can find it using this tag. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTPATH = +DOT_FONTPATH = # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for # each documented class showing the direct and indirect inheritance relations. @@ -2256,7 +2203,7 @@ # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -CLASS_GRAPH = YES +CLASS_GRAPH = YES # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a # graph for each documented class showing the direct and indirect implementation @@ -2265,14 +2212,14 @@ # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -COLLABORATION_GRAPH = YES +COLLABORATION_GRAPH = YES # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for # groups, showing the direct groups dependencies. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -GROUP_GRAPHS = YES +GROUP_GRAPHS = YES # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling @@ -2280,7 +2227,7 @@ # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. -UML_LOOK = NO +UML_LOOK = NO # If the UML_LOOK tag is enabled, the fields and methods are shown inside the # class node. If there are many fields or methods and many nodes the graph may @@ -2293,7 +2240,7 @@ # Minimum value: 0, maximum value: 100, default value: 10. # This tag requires that the tag HAVE_DOT is set to YES. -UML_LIMIT_NUM_FIELDS = 10 +UML_LIMIT_NUM_FIELDS = 10 # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and # collaboration graphs will show the relations between templates and their @@ -2301,7 +2248,7 @@ # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. -TEMPLATE_RELATIONS = NO +TEMPLATE_RELATIONS = NO # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to # YES then doxygen will generate a graph for each documented file showing the @@ -2310,7 +2257,7 @@ # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -INCLUDE_GRAPH = YES +INCLUDE_GRAPH = YES # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are # set to YES then doxygen will generate a graph for each documented file showing @@ -2319,7 +2266,7 @@ # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -INCLUDED_BY_GRAPH = YES +INCLUDED_BY_GRAPH = YES # If the CALL_GRAPH tag is set to YES then doxygen will generate a call # dependency graph for every global function or class method. @@ -2331,7 +2278,7 @@ # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. -CALL_GRAPH = NO +CALL_GRAPH = NO # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller # dependency graph for every global function or class method. @@ -2343,14 +2290,14 @@ # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. -CALLER_GRAPH = NO +CALLER_GRAPH = NO # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical # hierarchy of all classes instead of a textual one. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -GRAPHICAL_HIERARCHY = YES +GRAPHICAL_HIERARCHY = YES # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the # dependencies a directory has on other directories in a graphical way. The @@ -2359,7 +2306,7 @@ # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -DIRECTORY_GRAPH = YES +DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section @@ -2374,7 +2321,7 @@ # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_IMAGE_FORMAT = png +DOT_IMAGE_FORMAT = png # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to # enable generation of interactive SVG images that allow zooming and panning. @@ -2386,32 +2333,32 @@ # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. -INTERACTIVE_SVG = NO +INTERACTIVE_SVG = NO # The DOT_PATH tag can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_PATH = +DOT_PATH = # The DOTFILE_DIRS tag can be used to specify one or more directories that # contain dot files that are included in the documentation (see the \dotfile # command). # This tag requires that the tag HAVE_DOT is set to YES. -DOTFILE_DIRS = +DOTFILE_DIRS = # The MSCFILE_DIRS tag can be used to specify one or more directories that # contain msc files that are included in the documentation (see the \mscfile # command). -MSCFILE_DIRS = +MSCFILE_DIRS = # The DIAFILE_DIRS tag can be used to specify one or more directories that # contain dia files that are included in the documentation (see the \diafile # command). -DIAFILE_DIRS = +DIAFILE_DIRS = # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the # path where java can find the plantuml.jar file. If left blank, it is assumed @@ -2419,17 +2366,17 @@ # generate a warning when it encounters a \startuml command in this case and # will not generate output for the diagram. -PLANTUML_JAR_PATH = +PLANTUML_JAR_PATH = # When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a # configuration file for plantuml. -PLANTUML_CFG_FILE = +PLANTUML_CFG_FILE = # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. -PLANTUML_INCLUDE_PATH = +PLANTUML_INCLUDE_PATH = # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes @@ -2441,7 +2388,7 @@ # Minimum value: 0, maximum value: 10000, default value: 50. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_GRAPH_MAX_NODES = 50 +DOT_GRAPH_MAX_NODES = 50 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs # generated by dot. A depth value of 3 means that only nodes reachable from the @@ -2453,7 +2400,7 @@ # Minimum value: 0, maximum value: 1000, default value: 0. # This tag requires that the tag HAVE_DOT is set to YES. -MAX_DOT_GRAPH_DEPTH = 0 +MAX_DOT_GRAPH_DEPTH = 0 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent # background. This is disabled by default, because dot on Windows does not seem @@ -2465,7 +2412,7 @@ # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_TRANSPARENT = NO +DOT_TRANSPARENT = NO # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This @@ -2474,7 +2421,7 @@ # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_MULTI_TARGETS = NO +DOT_MULTI_TARGETS = NO # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated @@ -2482,11 +2429,11 @@ # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -GENERATE_LEGEND = YES +GENERATE_LEGEND = YES # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot # files that are used to generate the various graphs. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_CLEANUP = YES +DOT_CLEANUP = YES