mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L476RG/stm32l4xx_ll_lptim.h
- Revision:
- 122:f9eeca106725
diff -r 6c34061e7c34 -r f9eeca106725 TARGET_NUCLEO_L476RG/stm32l4xx_ll_lptim.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L476RG/stm32l4xx_ll_lptim.h Thu Jul 07 14:34:11 2016 +0100
@@ -0,0 +1,1433 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_lptim.h
+ * @author MCD Application Team
+ * @version V1.5.1
+ * @date 31-May-2016
+ * @brief Header file of LPTIM LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_LPTIM_H
+#define __STM32L4xx_LL_LPTIM_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+#if defined (LPTIM1) || defined (LPTIM2)
+
+/** @defgroup LPTIM_LL LPTIM
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup LPTIM_LL_Private_Macros LPTIM Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup LPTIM_LL_ES_INIT LPTIM Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief LPTIM Init structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< Specifies the source of the clock used by the LPTIM instance.
+ This parameter can be a value of @ref LPTIM_LL_EC_CLK_SOURCE.
+
+ This feature can be modified afterwards using unitary function @ref LL_LPTIM_SetClockSource().*/
+
+ uint32_t Prescaler; /*!< Specifies the prescaler division ratio.
+ This parameter can be a value of @ref LPTIM_LL_EC_PRESCALER.
+
+ This feature can be modified afterwards using using unitary function @ref LL_LPTIM_SetPrescaler().*/
+
+ uint32_t Waveform; /*!< Specifies the waveform shape.
+ This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_WAVEFORM.
+
+ This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/
+
+ uint32_t Polarity; /*!< Specifies waveform polarity.
+ This parameter can be a value of @ref LPTIM_LL_EC_OUTPUT_POLARITY.
+
+ This feature can be modified afterwards using unitary function @ref LL_LPTIM_ConfigOutput().*/
+} LL_LPTIM_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LPTIM_LL_Exported_Constants LPTIM Exported Constants
+ * @{
+ */
+
+/** @defgroup LPTIM_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_LPTIM_ReadReg function
+ * @{
+ */
+#define LL_LPTIM_ISR_CMPM LPTIM_ISR_CMPM /*!< Compare match */
+#define LL_LPTIM_ISR_ARRM LPTIM_ISR_ARRM /*!< Autoreload match */
+#define LL_LPTIM_ISR_EXTTRIG LPTIM_ISR_EXTTRIG /*!< External trigger edge event */
+#define LL_LPTIM_ISR_CMPOK LPTIM_ISR_CMPOK /*!< Compare register update OK */
+#define LL_LPTIM_ISR_ARROK LPTIM_ISR_ARROK /*!< Autoreload register update OK */
+#define LL_LPTIM_ISR_UP LPTIM_ISR_UP /*!< Counter direction change down to up */
+#define LL_LPTIM_ISR_DOWN LPTIM_ISR_DOWN /*!< Counter direction change up to down */
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_LPTIM_ReadReg and LL_LPTIM_WriteReg functions
+ * @{
+ */
+#define LL_LPTIM_IER_CMPMIE LPTIM_IER_CMPMIE /*!< Compare match Interrupt Enable */
+#define LL_LPTIM_IER_ARRMIE LPTIM_IER_ARRMIE /*!< Autoreload match Interrupt Enable */
+#define LL_LPTIM_IER_EXTTRIGIE LPTIM_IER_EXTTRIGIE /*!< External trigger valid edge Interrupt Enable */
+#define LL_LPTIM_IER_CMPOKIE LPTIM_IER_CMPOKIE /*!< Compare register update OK Interrupt Enable */
+#define LL_LPTIM_IER_ARROKIE LPTIM_IER_ARROKIE /*!< Autoreload register update OK Interrupt Enable */
+#define LL_LPTIM_IER_UPIE LPTIM_IER_UPIE /*!< Direction change to UP Interrupt Enable */
+#define LL_LPTIM_IER_DOWNIE LPTIM_IER_DOWNIE /*!< Direction change to down Interrupt Enable */
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_OPERATING_MODE Operating Mode
+ * @{
+ */
+#define LL_LPTIM_OPERATING_MODE_CONTINUOUS LPTIM_CR_CNTSTRT /*!<LP Timer starts in continuous mode*/
+#define LL_LPTIM_OPERATING_MODE_ONESHOT LPTIM_CR_SNGSTRT /*!<LP Tilmer starts in single mode*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_UPDATE_MODE Update Mode
+ * @{
+ */
+#define LL_LPTIM_UPDATE_MODE_IMMEDIATE ((uint32_t)0x00000000U) /*!<Preload is disabled: registers are updated after each APB bus write access*/
+#define LL_LPTIM_UPDATE_MODE_ENDOFPERIOD LPTIM_CFGR_PRELOAD /*!<preload is enabled: registers are updated at the end of the current LPTIM period*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_COUNTER_MODE Counter Mode
+ * @{
+ */
+#define LL_LPTIM_COUNTER_MODE_INTERNAL ((uint32_t)0x00000000U) /*!<The counter is incremented following each internal clock pulse*/
+#define LL_LPTIM_COUNTER_MODE_EXTERNAL LPTIM_CFGR_COUNTMODE /*!<The counter is incremented following each valid clock pulse on the LPTIM external Input1*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_OUTPUT_WAVEFORM Output Waveform Type
+ * @{
+ */
+#define LL_LPTIM_OUTPUT_WAVEFORM_PWM ((uint32_t)0x00000000U) /*!<LPTIM generates either a PWM waveform or a One pulse waveform depending on chosen operating mode CONTINOUS or SINGLE*/
+#define LL_LPTIM_OUTPUT_WAVEFORM_SETONCE LPTIM_CFGR_WAVE /*!<LPTIM generates a Set Once waveform*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_OUTPUT_POLARITY Output Polarity
+ * @{
+ */
+#define LL_LPTIM_OUTPUT_POLARITY_REGULAR ((uint32_t) 0x00000000U) /*!<The LPTIM output reflects the compare results between LPTIMx_ARR and LPTIMx_CMP registers*/
+#define LL_LPTIM_OUTPUT_POLARITY_INVERSE LPTIM_CFGR_WAVPOL /*!<The LPTIM output reflects the inverse of the compare results between LPTIMx_ARR and LPTIMx_CMP registers*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_PRESCALER Prescaler Value
+ * @{
+ */
+#define LL_LPTIM_PRESCALER_DIV1 ((uint32_t)0x000000U) /*!<Prescaler division factor is set to 1*/
+#define LL_LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0 /*!<Prescaler division factor is set to 2*/
+#define LL_LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1 /*!<Prescaler division factor is set to 4*/
+#define LL_LPTIM_PRESCALER_DIV8 (LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_0) /*!<Prescaler division factor is set to 8*/
+#define LL_LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2 /*!<Prescaler division factor is set to 16*/
+#define LL_LPTIM_PRESCALER_DIV32 (LPTIM_CFGR_PRESC_2 | LPTIM_CFGR_PRESC_0) /*!<Prescaler division factor is set to 32*/
+#define LL_LPTIM_PRESCALER_DIV64 (LPTIM_CFGR_PRESC_2 | LPTIM_CFGR_PRESC_1) /*!<Prescaler division factor is set to 64*/
+#define LL_LPTIM_PRESCALER_DIV128 LPTIM_CFGR_PRESC /*!<Prescaler division factor is set to 128*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_TRIG_SOURCE Trigger Source
+ * @{
+ */
+#define LL_LPTIM_TRIG_SOURCE_GPIO ((uint32_t)0x00000000U) /*!<External input trigger is connected to TIMx_ETR input*/
+#define LL_LPTIM_TRIG_SOURCE_RTCALARMA LPTIM_CFGR_TRIGSEL_0 /*!<External input trigger is connected to RTC Alarm A*/
+#define LL_LPTIM_TRIG_SOURCE_RTCALARMB LPTIM_CFGR_TRIGSEL_1 /*!<External input trigger is connected to RTC Alarm B*/
+#define LL_LPTIM_TRIG_SOURCE_RTCTAMP1 (LPTIM_CFGR_TRIGSEL_1 | LPTIM_CFGR_TRIGSEL_0) /*!<External input trigger is connected to RTC Tamper 1*/
+#define LL_LPTIM_TRIG_SOURCE_RTCTAMP2 LPTIM_CFGR_TRIGSEL_2 /*!<External input trigger is connected to RTC Tamper 2*/
+#define LL_LPTIM_TRIG_SOURCE_RTCTAMP3 (LPTIM_CFGR_TRIGSEL_2 | LPTIM_CFGR_TRIGSEL_0) /*!<External input trigger is connected to RTC Tamper 3*/
+#define LL_LPTIM_TRIG_SOURCE_COMP1 (LPTIM_CFGR_TRIGSEL_2 | LPTIM_CFGR_TRIGSEL_1) /*!<External input trigger is connected to COMP1 output*/
+#define LL_LPTIM_TRIG_SOURCE_COMP2 LPTIM_CFGR_TRIGSEL /*!<External input trigger is connected to COMP2 output*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_TRIG_FILTER Trigger Filter
+ * @{
+ */
+#define LL_LPTIM_TRIG_FILTER_NONE ((uint32_t)0x00000000U) /*!<Any trigger active level change is considered as a valid trigger*/
+#define LL_LPTIM_TRIG_FILTER_2 LPTIM_CFGR_TRGFLT_0 /*!<Trigger active level change must be stable for at least 2 clock periods before it is considered as valid trigger*/
+#define LL_LPTIM_TRIG_FILTER_4 LPTIM_CFGR_TRGFLT_1 /*!<Trigger active level change must be stable for at least 4 clock periods before it is considered as valid trigger*/
+#define LL_LPTIM_TRIG_FILTER_8 LPTIM_CFGR_TRGFLT /*!<Trigger active level change must be stable for at least 8 clock periods before it is considered as valid trigger*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_TRIG_POLARITY Trigger Polarity
+ * @{
+ */
+#define LL_LPTIM_TRIG_POLARITY_RISING LPTIM_CFGR_TRIGEN_0 /*!<LPTIM counter starts when a rising edge is detected*/
+#define LL_LPTIM_TRIG_POLARITY_FALLING LPTIM_CFGR_TRIGEN_1 /*!<LPTIM counter starts when a falling edge is detected*/
+#define LL_LPTIM_TRIG_POLARITY_RISING_FALLING LPTIM_CFGR_TRIGEN /*!<LPTIM counter starts when a rising or a falling edge is detected*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_CLK_SOURCE Clock Source
+ * @{
+ */
+#define LL_LPTIM_CLK_SOURCE_INTERNAL ((uint32_t)0x00000000U) /*!<LPTIM is clocked by internal clock source (APB clock or any of the embedded oscillators)*/
+#define LL_LPTIM_CLK_SOURCE_EXTERNAL LPTIM_CFGR_CKSEL /*!<LPTIM is clocked by an external clock source through the LPTIM external Input1*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_CLK_FILTER Clock Filter
+ * @{
+ */
+#define LL_LPTIM_CLK_FILTER_NONE ((uint32_t)0x00000000U) /*!<Any external clock signal level change is considered as a valid transition*/
+#define LL_LPTIM_CLK_FILTER_2 LPTIM_CFGR_CKFLT_0 /*!<External clock signal level change must be stable for at least 2 clock periods before it is considered as valid transition*/
+#define LL_LPTIM_CLK_FILTER_4 LPTIM_CFGR_CKFLT_1 /*!<External clock signal level change must be stable for at least 4 clock periods before it is considered as valid transition*/
+#define LL_LPTIM_CLK_FILTER_8 LPTIM_CFGR_CKFLT /*!<External clock signal level change must be stable for at least 8 clock periods before it is considered as valid transition*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_CLK_POLARITY Clock Polarity
+ * @{
+ */
+#define LL_LPTIM_CLK_POLARITY_RISING ((uint32_t)0x00000000U) /*!< The rising edge is the active edge used for counting*/
+#define LL_LPTIM_CLK_POLARITY_FALLING LPTIM_CFGR_CKPOL_0 /*!< The falling edge is the active edge used for counting*/
+#define LL_LPTIM_CLK_POLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1 /*!< Both edges are active edges*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EC_ENCODER_MODE Encoder Mode
+ * @{
+ */
+#define LL_LPTIM_ENCODER_MODE_RISING ((uint32_t)0x00000000U) /*!< The rising edge is the active edge used for counting*/
+#define LL_LPTIM_ENCODER_MODE_FALLING LPTIM_CFGR_CKPOL_0 /*!< The falling edge is the active edge used for counting*/
+#define LL_LPTIM_ENCODER_MODE_RISING_FALLING LPTIM_CFGR_CKPOL_1 /*!< Both edges are active edges*/
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_EC_INPUT1_SRC Input1 Source
+ * @{
+ */
+
+#define LL_LPTIM_INPUT1_SRC_GPIO ((uint32_t)0x00000000U) /*!< For LPTIM1 and LPTIM2 */
+#define LL_LPTIM_INPUT1_SRC_COMP1 LPTIM_OR_OR_0 /*!< For LPTIM1 and LPTIM2 */
+#define LL_LPTIM_INPUT1_SRC_COMP2 LPTIM_OR_OR_1 /*!< For LPTIM2 */
+#define LL_LPTIM_INPUT1_SRC_COMP1_COMP2 LPTIM_OR_OR /*!< For LPTIM2 */
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_EC_INPUT2_SRC Input2 Source
+ * @{
+ */
+
+#define LL_LPTIM_INPUT2_SRC_GPIO ((uint32_t)0x00000000U) /*!< For LPTIM1 */
+#define LL_LPTIM_INPUT2_SRC_COMP2 LPTIM_OR_OR_1 /*!< For LPTIM1 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LPTIM_LL_Exported_Macros LPTIM Exported Macros
+ * @{
+ */
+
+/** @defgroup LPTIM_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in LPTIM register
+ * @param __INSTANCE__ LPTIM Instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_LPTIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in LPTIM register
+ * @param __INSTANCE__ LPTIM Instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_LPTIM_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup LPTIM_LL_Exported_Functions LPTIM Exported Functions
+ * @{
+ */
+
+/** @defgroup LPTIM_LL_EF_LPTIM_Configuration LPTIM Configuration
+ * @{
+ */
+
+/**
+ * @brief Enable the LPTIM instance
+ * @note After setting the ENABLE bit, a delay of two counter clock is needed
+ * before the LPTIM instance is actually enabled.
+ * @rmtoll CR ENABLE LL_LPTIM_Enable
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_Enable(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->CR, LPTIM_CR_ENABLE);
+}
+
+/**
+ * @brief Disable the LPTIM instance
+ * @rmtoll CR ENABLE LL_LPTIM_Disable
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_Disable(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->CR, LPTIM_CR_ENABLE);
+}
+
+/**
+ * @brief Indicates whether the LPTIM instance is enabled.
+ * @rmtoll CR ENABLE LL_LPTIM_IsEnabled
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabled(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->CR, LPTIM_CR_ENABLE) == (LPTIM_CR_ENABLE));
+}
+
+/**
+ * @brief Starts the LPTIM counter in the desired mode.
+ * @note LPTIM instance must be enabled before starting the counter.
+ * @note It is possible to change on the fly from One Shot mode to
+ * Continuous mode.
+ * @rmtoll CR CNTSTRT LL_LPTIM_StartCounter\n
+ * CR SNGSTRT LL_LPTIM_StartCounter
+ * @param LPTIMx Low-Power Timer instance
+ * @param OperatingMode This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_OPERATING_MODE_CONTINUOUS
+ * @arg @ref LL_LPTIM_OPERATING_MODE_ONESHOT
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_StartCounter(LPTIM_TypeDef *LPTIMx, uint32_t OperatingMode)
+{
+ MODIFY_REG(LPTIMx->CR, LPTIM_CR_CNTSTRT | LPTIM_CR_SNGSTRT, OperatingMode);
+}
+
+/**
+ * @brief Set the LPTIM registers update mode (enable/disable register preload)
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @rmtoll CFGR PRELOAD LL_LPTIM_SetUpdateMode
+ * @param LPTIMx Low-Power Timer instance
+ * @param UpdateMode This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE
+ * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetUpdateMode(LPTIM_TypeDef *LPTIMx, uint32_t UpdateMode)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD, UpdateMode);
+}
+
+/**
+ * @brief Get the LPTIM registers update mode
+ * @rmtoll CFGR PRELOAD LL_LPTIM_GetUpdateMode
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_UPDATE_MODE_IMMEDIATE
+ * @arg @ref LL_LPTIM_UPDATE_MODE_ENDOFPERIOD
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetUpdateMode(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRELOAD));
+}
+
+/**
+ * @brief Set the auto reload value
+ * @note The LPTIMx_ARR register content must only be modified when the LPTIM is enabled
+ * @note After a write to the LPTIMx_ARR register a new write operation to the
+ * same register can only be performed when the previous write operation
+ * is completed. Any successive write before the ARROK flag be set, will
+ * lead to unpredictable results.
+ * @note autoreload value be strictly greater than the compare value.
+ * @rmtoll ARR ARR LL_LPTIM_SetAutoReload
+ * @param LPTIMx Low-Power Timer instance
+ * @param AutoReload Value between Min_Data=0x00 and Max_Data=0xFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetAutoReload(LPTIM_TypeDef *LPTIMx, uint32_t AutoReload)
+{
+ MODIFY_REG(LPTIMx->ARR, LPTIM_ARR_ARR, AutoReload);
+}
+
+/**
+ * @brief Get actual auto reload value
+ * @rmtoll ARR ARR LL_LPTIM_GetAutoReload
+ * @param LPTIMx Low-Power Timer instance
+ * @retval AutoReload Value between Min_Data=0x00 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetAutoReload(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->ARR, LPTIM_ARR_ARR));
+}
+
+/**
+ * @brief Set the compare value
+ * @note After a write to the LPTIMx_CMP register a new write operation to the
+ * same register can only be performed when the previous write operation
+ * is completed. Any successive write before the CMPOK flag be set, will
+ * lead to unpredictable results.
+ * @rmtoll CMP CMP LL_LPTIM_SetCompare
+ * @param LPTIMx Low-Power Timer instance
+ * @param CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetCompare(LPTIM_TypeDef *LPTIMx, uint32_t CompareValue)
+{
+ MODIFY_REG(LPTIMx->CMP, LPTIM_CMP_CMP, CompareValue);
+}
+
+/**
+ * @brief Get actual compare value
+ * @rmtoll CMP CMP LL_LPTIM_GetCompare
+ * @param LPTIMx Low-Power Timer instance
+ * @retval CompareValue Value between Min_Data=0x00 and Max_Data=0xFFFF
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetCompare(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CMP, LPTIM_CMP_CMP));
+}
+
+/**
+ * @brief Get actual counter value
+ * @note When the LPTIM instance is running with an asynchronous clock, reading
+ * the LPTIMx_CNT register may return unreliable values. So in this case
+ * it is necessary to perform two consecutive read accesses and verify
+ * that the two returned values are identical.
+ * @rmtoll CNT CNT LL_LPTIM_GetCounter
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Counter value
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetCounter(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CNT, LPTIM_CNT_CNT));
+}
+
+/**
+ * @brief Set the counter mode (selection of the LPTIM counter clock source).
+ * @note The counter mode can be set only when the LPTIM instance is disabled.
+ * @rmtoll CFGR COUNTMODE LL_LPTIM_SetCounterMode
+ * @param LPTIMx Low-Power Timer instance
+ * @param CounterMode This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL
+ * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetCounterMode(LPTIM_TypeDef *LPTIMx, uint32_t CounterMode)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE, CounterMode);
+}
+
+/**
+ * @brief Get the counter mode
+ * @rmtoll CFGR COUNTMODE LL_LPTIM_GetCounterMode
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_COUNTER_MODE_INTERNAL
+ * @arg @ref LL_LPTIM_COUNTER_MODE_EXTERNAL
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetCounterMode(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_COUNTMODE));
+}
+
+/**
+ * @brief Configure the LPTIM instance output (LPTIMx_OUT)
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @note Regarding the LPTIM output polarity the change takes effect
+ * immediately, so the output default value will change immediately after
+ * the polarity is re-configured, even before the timer is enabled.
+ * @rmtoll CFGR WAVE LL_LPTIM_ConfigOutput\n
+ * CFGR WAVPOL LL_LPTIM_ConfigOutput
+ * @param LPTIMx Low-Power Timer instance
+ * @param Waveform This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM
+ * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR
+ * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ConfigOutput(LPTIM_TypeDef *LPTIMx, uint32_t Waveform, uint32_t Polarity)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE | LPTIM_CFGR_WAVPOL, Waveform | Polarity);
+}
+
+/**
+ * @brief Set waveform shape
+ * @rmtoll CFGR WAVE LL_LPTIM_SetWaveform
+ * @param LPTIMx Low-Power Timer instance
+ * @param Waveform This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM
+ * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetWaveform(LPTIM_TypeDef *LPTIMx, uint32_t Waveform)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVE, Waveform);
+}
+
+/**
+ * @brief Get actual waveform shape
+ * @rmtoll CFGR WAVE LL_LPTIM_GetWaveform
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_PWM
+ * @arg @ref LL_LPTIM_OUTPUT_WAVEFORM_SETONCE
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetWaveform(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVE));
+}
+
+/**
+ * @brief Set output polarity
+ * @rmtoll CFGR WAVPOL LL_LPTIM_SetPolarity
+ * @param LPTIMx Low-Power Timer instance
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR
+ * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetPolarity(LPTIM_TypeDef *LPTIMx, uint32_t Polarity)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL, Polarity);
+}
+
+/**
+ * @brief Get actual output polarity
+ * @rmtoll CFGR WAVPOL LL_LPTIM_GetPolarity
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_OUTPUT_POLARITY_REGULAR
+ * @arg @ref LL_LPTIM_OUTPUT_POLARITY_INVERSE
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetPolarity(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_WAVPOL));
+}
+
+/**
+ * @brief Set actual prescaler division ratio.
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @note When the LPTIM is configured to be clocked by an internal clock source
+ * and the LPTIM counter is configured to be updated by active edges
+ * detected on the LPTIM external Input1, the internal clock provided to
+ * the LPTIM must be not be prescaled.
+ * @rmtoll CFGR PRESC LL_LPTIM_SetPrescaler
+ * @param LPTIMx Low-Power Timer instance
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_PRESCALER_DIV1
+ * @arg @ref LL_LPTIM_PRESCALER_DIV2
+ * @arg @ref LL_LPTIM_PRESCALER_DIV4
+ * @arg @ref LL_LPTIM_PRESCALER_DIV8
+ * @arg @ref LL_LPTIM_PRESCALER_DIV16
+ * @arg @ref LL_LPTIM_PRESCALER_DIV32
+ * @arg @ref LL_LPTIM_PRESCALER_DIV64
+ * @arg @ref LL_LPTIM_PRESCALER_DIV128
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetPrescaler(LPTIM_TypeDef *LPTIMx, uint32_t Prescaler)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_PRESC, Prescaler);
+}
+
+/**
+ * @brief Get actual prescaler division ratio.
+ * @rmtoll CFGR PRESC LL_LPTIM_GetPrescaler
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_PRESCALER_DIV1
+ * @arg @ref LL_LPTIM_PRESCALER_DIV2
+ * @arg @ref LL_LPTIM_PRESCALER_DIV4
+ * @arg @ref LL_LPTIM_PRESCALER_DIV8
+ * @arg @ref LL_LPTIM_PRESCALER_DIV16
+ * @arg @ref LL_LPTIM_PRESCALER_DIV32
+ * @arg @ref LL_LPTIM_PRESCALER_DIV64
+ * @arg @ref LL_LPTIM_PRESCALER_DIV128
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetPrescaler(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_PRESC));
+}
+
+/**
+ * @brief Set LPTIM input 1 source (default GPIO).
+ * @rmtoll OR OR_0 LL_LPTIM_SetInput1Src
+ * @rmtoll OR OR_1 LL_LPTIM_SetInput1Src
+ * @param LPTIMx Low-Power Timer instance
+ * @param Src This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_INPUT1_SRC_GPIO
+ * @arg @ref LL_LPTIM_INPUT1_SRC_COMP1
+ * @arg @ref LL_LPTIM_INPUT1_SRC_COMP2
+ * @arg @ref LL_LPTIM_INPUT1_SRC_COMP1_COMP2
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetInput1Src(LPTIM_TypeDef *LPTIMx, uint32_t Src)
+{
+ WRITE_REG(LPTIMx->OR, Src);
+}
+
+/**
+ * @brief Set LPTIM input 2 source (default GPIO).
+ * @rmtoll OR OR_0 LL_LPTIM_SetInput2Src
+ * @param LPTIMx Low-Power Timer instance
+ * @param Src This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_INPUT2_SRC_GPIO
+ * @arg @ref LL_LPTIM_INPUT2_SRC_COMP2
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetInput2Src(LPTIM_TypeDef *LPTIMx, uint32_t Src)
+{
+ WRITE_REG(LPTIMx->OR, Src);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EF_Trigger_Configuration Trigger Configuration
+ * @{
+ */
+
+/**
+ * @brief Enable the timeout function
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @note The first trigger event will start the timer, any successive trigger
+ * event will reset the counter and the timer will restart.
+ * @note The timeout value corresponds to the compare value; if no trigger
+ * occurs within the expected time frame, the MCU is waked-up by the
+ * compare match event.
+ * @rmtoll CFGR TIMOUT LL_LPTIM_EnableTimeout
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableTimeout(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT);
+}
+
+/**
+ * @brief Disable the timeout function
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @note A trigger event arriving when the timer is already started will be
+ * ignored.
+ * @rmtoll CFGR TIMOUT LL_LPTIM_DisableTimeout
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableTimeout(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT);
+}
+
+/**
+ * @brief Indicate whether the timeout function is enabled.
+ * @rmtoll CFGR TIMOUT LL_LPTIM_IsEnabledTimeout
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledTimeout(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TIMOUT) == (LPTIM_CFGR_TIMOUT));
+}
+
+/**
+ * @brief Start the LPTIM counter
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @rmtoll CFGR TRIGEN LL_LPTIM_TrigSw
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_TrigSw(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN);
+}
+
+/**
+ * @brief Configure the external trigger used as a trigger event for the LPTIM.
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @note An internal clock source must be present when a digital filter is
+ * required for the trigger.
+ * @rmtoll CFGR TRIGSEL LL_LPTIM_ConfigTrigger\n
+ * CFGR TRGFLT LL_LPTIM_ConfigTrigger\n
+ * CFGR TRIGEN LL_LPTIM_ConfigTrigger
+ * @param LPTIMx Low-Power Timer instance
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP2
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP1
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP2
+ * @param Filter This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_TRIG_FILTER_NONE
+ * @arg @ref LL_LPTIM_TRIG_FILTER_2
+ * @arg @ref LL_LPTIM_TRIG_FILTER_4
+ * @arg @ref LL_LPTIM_TRIG_FILTER_8
+ * @param Polarity This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING
+ * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING
+ * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ConfigTrigger(LPTIM_TypeDef *LPTIMx, uint32_t Source, uint32_t Filter, uint32_t Polarity)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL | LPTIM_CFGR_TRGFLT | LPTIM_CFGR_TRIGEN, Source | Filter | Polarity);
+}
+
+/**
+ * @brief Get actual external trigger source.
+ * @rmtoll CFGR TRIGSEL LL_LPTIM_GetTriggerSource
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_GPIO
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMA
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCALARMB
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP1
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP2
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_RTCTAMP3
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP1
+ * @arg @ref LL_LPTIM_TRIG_SOURCE_COMP2
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerSource(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGSEL));
+}
+
+/**
+ * @brief Get actual external trigger filter.
+ * @rmtoll CFGR TRGFLT LL_LPTIM_GetTriggerFilter
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_TRIG_FILTER_NONE
+ * @arg @ref LL_LPTIM_TRIG_FILTER_2
+ * @arg @ref LL_LPTIM_TRIG_FILTER_4
+ * @arg @ref LL_LPTIM_TRIG_FILTER_8
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerFilter(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRGFLT));
+}
+
+/**
+ * @brief Get actual external trigger polarity.
+ * @rmtoll CFGR TRIGEN LL_LPTIM_GetTriggerPolarity
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING
+ * @arg @ref LL_LPTIM_TRIG_POLARITY_FALLING
+ * @arg @ref LL_LPTIM_TRIG_POLARITY_RISING_FALLING
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetTriggerPolarity(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_TRIGEN));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EF_Clock_Configuration Clock Configuration
+ * @{
+ */
+
+/**
+ * @brief Set the source of the clock used by the LPTIM instance.
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @rmtoll CFGR CKSEL LL_LPTIM_SetClockSource
+ * @param LPTIMx Low-Power Timer instance
+ * @param ClockSource This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL
+ * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetClockSource(LPTIM_TypeDef *LPTIMx, uint32_t ClockSource)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKSEL, ClockSource);
+}
+
+/**
+ * @brief Get actual LPTIM instance clock source.
+ * @rmtoll CFGR CKSEL LL_LPTIM_GetClockSource
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_CLK_SOURCE_INTERNAL
+ * @arg @ref LL_LPTIM_CLK_SOURCE_EXTERNAL
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetClockSource(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKSEL));
+}
+
+/**
+ * @brief Configure the active edge or edges used by the counter when the LPTIM is clocked by an external clock source.
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @note When both external clock signal edges are considered active ones,
+ * the LPTIM must also be clocked by an internal clock source with a
+ * frequency equal to at least four times the external clock frequency.
+ * @note An internal clock source must be present when a digital filter is
+ * required for external clock.
+ * @rmtoll CFGR CKFLT LL_LPTIM_ConfigClock\n
+ * CFGR CKPOL LL_LPTIM_ConfigClock
+ * @param LPTIMx Low-Power Timer instance
+ * @param ClockFilter This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_CLK_FILTER_NONE
+ * @arg @ref LL_LPTIM_CLK_FILTER_2
+ * @arg @ref LL_LPTIM_CLK_FILTER_4
+ * @arg @ref LL_LPTIM_CLK_FILTER_8
+ * @param ClockPolarity This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_CLK_POLARITY_RISING
+ * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING
+ * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ConfigClock(LPTIM_TypeDef *LPTIMx, uint32_t ClockFilter, uint32_t ClockPolarity)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKFLT | LPTIM_CFGR_CKPOL, ClockFilter | ClockPolarity);
+}
+
+/**
+ * @brief Get actual clock polarity
+ * @rmtoll CFGR CKPOL LL_LPTIM_GetClockPolarity
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_CLK_POLARITY_RISING
+ * @arg @ref LL_LPTIM_CLK_POLARITY_FALLING
+ * @arg @ref LL_LPTIM_CLK_POLARITY_RISING_FALLING
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetClockPolarity(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL));
+}
+
+/**
+ * @brief Get actual clock digital filter
+ * @rmtoll CFGR CKFLT LL_LPTIM_GetClockFilter
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_CLK_FILTER_NONE
+ * @arg @ref LL_LPTIM_CLK_FILTER_2
+ * @arg @ref LL_LPTIM_CLK_FILTER_4
+ * @arg @ref LL_LPTIM_CLK_FILTER_8
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetClockFilter(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKFLT));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EF_Encoder_Mode Encoder Mode
+ * @{
+ */
+
+/**
+ * @brief Configure the encoder mode.
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @rmtoll CFGR CKPOL LL_LPTIM_SetEncoderMode
+ * @param LPTIMx Low-Power Timer instance
+ * @param EncoderMode This parameter can be one of the following values:
+ * @arg @ref LL_LPTIM_ENCODER_MODE_RISING
+ * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING
+ * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_SetEncoderMode(LPTIM_TypeDef *LPTIMx, uint32_t EncoderMode)
+{
+ MODIFY_REG(LPTIMx->CFGR, LPTIM_CFGR_CKPOL, EncoderMode);
+}
+
+/**
+ * @brief Get actual encoder mode.
+ * @rmtoll CFGR CKPOL LL_LPTIM_GetEncoderMode
+ * @param LPTIMx Low-Power Timer instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_LPTIM_ENCODER_MODE_RISING
+ * @arg @ref LL_LPTIM_ENCODER_MODE_FALLING
+ * @arg @ref LL_LPTIM_ENCODER_MODE_RISING_FALLING
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_GetEncoderMode(LPTIM_TypeDef *LPTIMx)
+{
+ return (uint32_t)(READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_CKPOL));
+}
+
+/**
+ * @brief Enable the encoder mode
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @note In this mode the LPTIM instance must be clocked by an internal clock
+ * source. Also, the prescaler division ratio must be equal to 1.
+ * @note LPTIM instance must be configured in continuous mode prior enabling
+ * the encoder mode.
+ * @rmtoll CFGR ENC LL_LPTIM_EnableEncoderMode
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableEncoderMode(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC);
+}
+
+/**
+ * @brief Disable the encoder mode
+ * @note This function must be called when the LPTIM instance is disabled.
+ * @rmtoll CFGR ENC LL_LPTIM_DisableEncoderMode
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableEncoderMode(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC);
+}
+
+/**
+ * @brief Indicates whether the LPTIM operates in encoder mode.
+ * @rmtoll CFGR ENC LL_LPTIM_IsEnabledEncoderMode
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledEncoderMode(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->CFGR, LPTIM_CFGR_ENC) == (LPTIM_CFGR_ENC));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EF_FLAG_Management FLAG Management
+ * @{
+ */
+
+/**
+ * @brief Clear the compare match flag (CMPMCF)
+ * @rmtoll ICR CMPMCF LL_LPTIM_ClearFLAG_CMPM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ClearFLAG_CMPM(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMPMCF);
+}
+
+/**
+ * @brief Inform application whether a compare match interrupt has occurred.
+ * @rmtoll ISR CMPM LL_LPTIM_IsActiveFlag_CMPM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPM(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPM) == (LPTIM_ISR_CMPM));
+}
+
+/**
+ * @brief Clear the autoreload match flag (ARRMCF)
+ * @rmtoll ICR ARRMCF LL_LPTIM_ClearFLAG_ARRM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ClearFLAG_ARRM(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARRMCF);
+}
+
+/**
+ * @brief Inform application whether a autoreload match interrupt has occured.
+ * @rmtoll ISR ARRM LL_LPTIM_IsActiveFlag_ARRM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARRM(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARRM) == (LPTIM_ISR_ARRM));
+}
+
+/**
+ * @brief Clear the external trigger valid edge flag(EXTTRIGCF).
+ * @rmtoll ICR EXTTRIGCF LL_LPTIM_ClearFlag_EXTTRIG
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ClearFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->ICR, LPTIM_ICR_EXTTRIGCF);
+}
+
+/**
+ * @brief Inform application whether a valid edge on the selected external trigger input has occurred.
+ * @rmtoll ISR EXTTRIG LL_LPTIM_IsActiveFlag_EXTTRIG
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_EXTTRIG(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_EXTTRIG) == (LPTIM_ISR_EXTTRIG));
+}
+
+/**
+ * @brief Clear the compare register update interrupt flag (CMPOKCF).
+ * @rmtoll ICR CMPOKCF LL_LPTIM_ClearFlag_CMPOK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ClearFlag_CMPOK(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->ICR, LPTIM_ICR_CMPOKCF);
+}
+
+/**
+ * @brief Informs application whether the APB bus write operation to the LPTIMx_CMP register has been successfully completed; If so, a new one can be initiated.
+ * @rmtoll ISR CMPOK LL_LPTIM_IsActiveFlag_CMPOK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_CMPOK(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_CMPOK) == (LPTIM_ISR_CMPOK));
+}
+
+/**
+ * @brief Clear the autoreload register update interrupt flag (ARROKCF).
+ * @rmtoll ICR ARROKCF LL_LPTIM_ClearFlag_ARROK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ClearFlag_ARROK(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->ICR, LPTIM_ICR_ARROKCF);
+}
+
+/**
+ * @brief Informs application whether the APB bus write operation to the LPTIMx_ARR register has been successfully completed; If so, a new one can be initiated.
+ * @rmtoll ISR ARROK LL_LPTIM_IsActiveFlag_ARROK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_ARROK(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_ARROK) == (LPTIM_ISR_ARROK));
+}
+
+/**
+ * @brief Clear the counter direction change to up interrupt flag (UPCF).
+ * @rmtoll ICR UPCF LL_LPTIM_ClearFlag_UP
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ClearFlag_UP(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->ICR, LPTIM_ICR_UPCF);
+}
+
+/**
+ * @brief Informs the application whether the counter direction has changed from down to up (when the LPTIM instance operates in encoder mode).
+ * @rmtoll ISR UP LL_LPTIM_IsActiveFlag_UP
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_UP(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_UP) == (LPTIM_ISR_UP));
+}
+
+/**
+ * @brief Clear the counter direction change to down interrupt flag (DOWNCF).
+ * @rmtoll ICR DOWNCF LL_LPTIM_ClearFlag_DOWN
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_ClearFlag_DOWN(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->ICR, LPTIM_ICR_DOWNCF);
+}
+
+/**
+ * @brief Informs the application whether the counter direction has changed from up to down (when the LPTIM instance operates in encoder mode).
+ * @rmtoll ISR DOWN LL_LPTIM_IsActiveFlag_DOWN
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsActiveFlag_DOWN(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->ISR, LPTIM_ISR_DOWN) == (LPTIM_ISR_DOWN));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_LL_EF_IT_Management Interrupt Management
+ * @{
+ */
+
+/**
+ * @brief Enable compare match interrupt (CMPMIE).
+ * @rmtoll IER CMPMIE LL_LPTIM_EnableIT_CMPM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableIT_CMPM(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE);
+}
+
+/**
+ * @brief Disable compare match interrupt (CMPMIE).
+ * @rmtoll IER CMPMIE LL_LPTIM_DisableIT_CMPM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableIT_CMPM(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE);
+}
+
+/**
+ * @brief Indicates whether the compare match interrupt (CMPMIE) is enabled.
+ * @rmtoll IER CMPMIE LL_LPTIM_IsEnabledIT_CMPM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPM(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->IER, LPTIM_IER_CMPMIE) == (LPTIM_IER_CMPMIE));
+}
+
+/**
+ * @brief Enable autoreload match interrupt (ARRMIE).
+ * @rmtoll IER ARRMIE LL_LPTIM_EnableIT_ARRM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableIT_ARRM(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE);
+}
+
+/**
+ * @brief Disable autoreload match interrupt (ARRMIE).
+ * @rmtoll IER ARRMIE LL_LPTIM_DisableIT_ARRM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableIT_ARRM(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE);
+}
+
+/**
+ * @brief Indicates whether the autoreload match interrupt (ARRMIE) is enabled.
+ * @rmtoll IER ARRMIE LL_LPTIM_IsEnabledIT_ARRM
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARRM(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->IER, LPTIM_IER_ARRMIE) == (LPTIM_IER_ARRMIE));
+}
+
+/**
+ * @brief Enable external trigger valid edge interrupt (EXTTRIGIE).
+ * @rmtoll IER EXTTRIGIE LL_LPTIM_EnableIT_EXTTRIG
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE);
+}
+
+/**
+ * @brief Disable external trigger valid edge interrupt (EXTTRIGIE).
+ * @rmtoll IER EXTTRIGIE LL_LPTIM_DisableIT_EXTTRIG
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableIT_EXTTRIG(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE);
+}
+
+/**
+ * @brief Indicates external trigger valid edge interrupt (EXTTRIGIE) is enabled.
+ * @rmtoll IER EXTTRIGIE LL_LPTIM_IsEnabledIT_EXTTRIG
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_EXTTRIG(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->IER, LPTIM_IER_EXTTRIGIE) == (LPTIM_IER_EXTTRIGIE));
+}
+
+/**
+ * @brief Enable compare register write completed interrupt (CMPOKIE).
+ * @rmtoll IER CMPOKIE LL_LPTIM_EnableIT_CMPOK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableIT_CMPOK(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE);
+}
+
+/**
+ * @brief Disable compare register write completed interrupt (CMPOKIE).
+ * @rmtoll IER CMPOKIE LL_LPTIM_DisableIT_CMPOK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableIT_CMPOK(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE);
+}
+
+/**
+ * @brief Indicates whether the compare register write completed interrupt (CMPOKIE) is enabled.
+ * @rmtoll IER CMPOKIE LL_LPTIM_IsEnabledIT_CMPOK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_CMPOK(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->IER, LPTIM_IER_CMPOKIE) == (LPTIM_IER_CMPOKIE));
+}
+
+/**
+ * @brief Enable autoreload register write completed interrupt (ARROKIE).
+ * @rmtoll IER ARROKIE LL_LPTIM_EnableIT_ARROK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableIT_ARROK(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE);
+}
+
+/**
+ * @brief Disable autoreload register write completed interrupt (ARROKIE).
+ * @rmtoll IER ARROKIE LL_LPTIM_DisableIT_ARROK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableIT_ARROK(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE);
+}
+
+/**
+ * @brief Indicates whether the autoreload register write completed interrupt (ARROKIE) is enabled.
+ * @rmtoll IER ARROKIE LL_LPTIM_IsEnabledIT_ARROK
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_ARROK(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->IER, LPTIM_IER_ARROKIE) == (LPTIM_IER_ARROKIE));
+}
+
+/**
+ * @brief Enable direction change to up interrupt (UPIE).
+ * @rmtoll IER UPIE LL_LPTIM_EnableIT_UP
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableIT_UP(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->IER, LPTIM_IER_UPIE);
+}
+
+/**
+ * @brief Disable direction change to up interrupt (UPIE).
+ * @rmtoll IER UPIE LL_LPTIM_DisableIT_UP
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableIT_UP(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->IER, LPTIM_IER_UPIE);
+}
+
+/**
+ * @brief Indicates whether the direction change to up interrupt (UPIE) is enabled.
+ * @rmtoll IER UPIE LL_LPTIM_IsEnabledIT_UP
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_UP(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->IER, LPTIM_IER_UPIE) == (LPTIM_IER_UPIE));
+}
+
+/**
+ * @brief Enable direction change to down interrupt (DOWNIE).
+ * @rmtoll IER DOWNIE LL_LPTIM_EnableIT_DOWN
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_EnableIT_DOWN(LPTIM_TypeDef *LPTIMx)
+{
+ SET_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE);
+}
+
+/**
+ * @brief Disable direction change to down interrupt (DOWNIE).
+ * @rmtoll IER DOWNIE LL_LPTIM_DisableIT_DOWN
+ * @param LPTIMx Low-Power Timer instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_LPTIM_DisableIT_DOWN(LPTIM_TypeDef *LPTIMx)
+{
+ CLEAR_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE);
+}
+
+/**
+ * @brief Indicates whether the direction change to down interrupt (DOWNIE) is enabled.
+ * @rmtoll IER DOWNIE LL_LPTIM_IsEnabledIT_DOWN
+ * @param LPTIMx Low-Power Timer instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_LPTIM_IsEnabledIT_DOWN(LPTIM_TypeDef *LPTIMx)
+{
+ return (READ_BIT(LPTIMx->IER, LPTIM_IER_DOWNIE) == (LPTIM_IER_DOWNIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup LPTIM_LL_EF_Init Initialisation and deinitialisation functions
+ * @{
+ */
+
+ErrorStatus LL_LPTIM_DeInit(LPTIM_TypeDef *LPTIMx);
+void LL_LPTIM_StructInit(LL_LPTIM_InitTypeDef *LPTIM_InitStruct);
+ErrorStatus LL_LPTIM_Init(LPTIM_TypeDef *LPTIMx, LL_LPTIM_InitTypeDef *LPTIM_InitStruct);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* LPTIM1 || LPTIM2 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_LPTIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
